SOW_KANAWHA_Window_Seal_Replacement.doc

TECHNICAL SERVICES FOR WINDOW SEAL REPLACMENT ONBOARD

THE USCGC KANAWHA

1. Background. This requirement is for the replacement of all the window seals on the bridge on board the cutter, drawing and pictures attached.

2. References.

2.1. Bridge_Window_Seal_Replacement.pdf

2.2. 75E-WLR-1107_7_1_-_5.pdf

3. Scope. The scope of this work is on the USCGC KANAWHA and consists of disassembly and replacement of all window seals on the bridge of the cutter. Request contractor renew seals on fixed windows and renew sash on sliding windows. Drawing 75E-WLR-1107-7 contains the proper dimensions for each window. There are 6 fixed windows and 5 sliding windows. The glass thickness on the sliding windows is 5mm.

4. Tasks. The contractor shall provide onboard engineering services to replace all the window seals on the bridge windows include but not limited to:

4.1. Remove and replace all glass run and edge seals on all the sliding windows, as well as the self-sealing rubber seals on all the fixed windows on the bridge, drawing and pictures attached. Provide all materials, parts, and tools needed to complete work.

4.2. Replace any plate glass with laminated glass. Provide all materials, parts, and tools needed to complete work.

4.3. Ensure proper operation of the windows after seal replacement.

4.4. Submit CFRs for any additional work needed to restore windows to manufacturer’s operating specifications.

5. Delivery. Contractor shall provide a final report within 3 days of contract period of performance.

6. Government furnished property. None.

7. Security Requirement. Base access is required. Vendor shall have a valid driver’s license and show identification. A CG representative from the cutter will sponsor and escort vendor to the cutter.

8. Place of performance-

8.1. CGC KANAWHA

4101 Port Road Pine Bluff, AR 71611 POC: MKC Jared Landheer (361-563-2341)

9. Period of performance-

9.1. Vendor’s earliest availability