JOTFOC-AS010.pdf

JUSTIFICATION FOR OTHER THAN FULL AND OPEN COMPETITION

SIMPLIFIED ACQUISITION PROCEDURES (SAP) FAR 13.106-1(b)

SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTRACTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABLE. THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM THE CUSTOMER. WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION WHICH LIMITS THE AVAILABILITY TO ONE SOURCE, THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT

WILL MEET THE GOVERNMENT’S REQUIREMENT.

PURCHASE REQUEST OR REQUISITION

NUMBER

PROJECT/TASK

NUMBER

ESTIMATED AMOUNT (Over Micro- Purchase Threshold, but up to the SAT)

CITE AUTHORITY & JUSTIFICATION TYPE – READ FAR 6.302 TO DETERMINE APPROPRIATE TYPE

10 U.S.C. § 3204(a)(1) ONLY ONE RESPONSIBLE SOURCE AND NO OTHER SUPPLIES OR SERVICES WILL SATISFY

AGENCY REQUIREMENTS.

10 U.S.C. § 3204(a)(2) UNUSUAL AND COMPELLING URGENCY

10 U.S.C. § 3204(a)(3) INDUSTRIAL MOBILIZATION; ENGINEERING, DEVELOPMENTAL, OR RESEARCH CAPABILITY; OR

EXPERT SERVICES

10 U.S.C. § 3204(a)(4) INTERNATIONAL AGREEMENT

10 U.S.C. § 3204(a)(5) AUTHORIZED OR REQUIRED BY STATUTE

10 U.S.C. § 3204(a)(6) NATIONAL SECURITY

10 U.S.C. § 3204(a)(7) PUBLIC INTEREST [SECRETARY OF HOMELAND SECURITY NEEDS TO APPROVE THIS DOC]

BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED, AND THE INTENDED USE. The purchase of two (2) each EJECTOR, JETs NSN 4320-01-645-4754, P/N 305J-00240, provided by MARINE JET POWER INC. Vessel: CB-LRI II. MARINE JET POWER INC. the Original Equipment Manufacturer (OEM).

UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE, WITH THE REASON NO OTHER SUPPLIES OR SERVICES CAN BE USED. The technical data for the EJECTOR, JET required to make an accurate assessment of equal or alternate equipment meeting the Coast Guard’s performance, fit, form and function requirements for this procurement is unavailable. The EJECTOR, JET is used to propel the CB-LRI II small boat platform, which supports multiple SAR & LE missions. The EJECTOR, JET provides the forward and reverse thrust and permits proper handling and steering of the boat. A failure to this system would result in a loss of underway or docking maneuverability, causing a severe degradation to the mission and safety of the crew. MARINE JET POWER INC. is the installed brand on these platforms. Any attempt to manufacture this item without the proper (OEM) parts and access to OEM reproduction manufacturing drawings, spec, tolerances/parameters, test procedures and other relevant information, could lead to major mission degradation. Therefore, all replacement parts offered shall be only “official brand” (OEM) parts.

A DESCRIPTION OF EFFORTS MADE TO ENSURE THAT QUOTATIONS OR OFFERS ARE SOLICITED FROM AS MANY POTENTIAL SOURCES AS PRACTICABLE (INCLUDE YOUR MARKET RESEARCH EFFORTS HERE). Researched the Internet for vendors available to provide the EJECTOR, JET. MARINE JET POWER, INC. is the suggested source that can provide the EJECTOR, JET installed onboard, searched for other vendors capable of supplying the EJECTOR, JET. While other vendors produce the EJECTOR, JET, to deviate from the installed brand may require fabrication upon installation.

MARINE JET POWER, INC., does not have known distributors.

REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES.

MARINE JET POWER, INC. is the suggested source that can provide the EJECTOR, JET to support the installed equipment. MARINE JET POWER, INC. is the sole possessor of the drawings and other technical information required to properly manufacture the EJECTOR, JET. Another vendor’s parts may not contain the same fit, form and function. The installation of MARINE JET POWER, INC.

parts will ensure the continuity and configuration of the EJECTOR, JET installed at Coast Guard units. The Coast Guard does not have any technical information to deviate from the parts installed; another vendor’s offer may lead to fabrication being necessary for installation.

EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN COMPETITION HAS NOT BEEN DEVELOPED OR ARE NOT AVAILABLE. This is a proprietary commercial item of the proposed contractor. The reproduction of manufacturing drawings, specifications and other technical data related to this item were never purchased by the U.S. Coast Guard and therefore are controlled by and remain the sole property of the OEM.

PROVIDE A STATEMENT OF ACTIONS, IF ANY, THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE ACQUISITIONS ARE REQUIRED. COR will continue to conduct market research in the attempt to locate vendors that can satisfy the needs of the Coast Guard including a requirement for manufacturer’s engineering drawings, detailed parts lists, design or testing procedures, and other relevant information concerning this item.

SIGNATURE AND TITLE OF CUSTOMER

James Taylor, COR

CODE

SBPL

TELEPHONE

NUMBER

410-762-6973

DATE

December 14, 2023

SIGNATURE OF CONTRACTING OFFICER CODE TELEPHONE

NUMBER

DATE

March 8, 2023 Version