Attachment II - Pre-qualifications Requirements_August 12 2021.pdf

Attachment II – Pre-Qualification Requirements

1. Corporate Experience - To be qualified for this procurement, the Offeror must demonstrate the following:

a. Successful completion of two or more projects of similar size, scope and complexity to the draft Statement of Work, within the past six years. Projects of similar size, scope and complexity are those valued at $2 million or more which included work involving multiple disciplines or trades.

b. For each project listed in response to 1(a), the Offeror must provide at a minimum:

(a) Project title and location;

(b) Length of contract time and date completed;

(c) Total contract cost;

(d) Brief description of the project;

(e) Types and value of contract work executed by the Offeror;

(f) Special project requirements or constraints, if any such as project phasing requirements, night and weekend work, dust control, noise control;

(g) Describe any problems encountered and corrective action taken, if any;

(h) Project reference information (i.e., Client company name and name, title, address, phone number and email address of client contact).

The forms to be used for each submission of Corporate Experience can be found on pages 4-5 of this document. The Offeror may expand the forms to fit the experience, but the total response to the Corporate Experience requirement must not exceed 10 pages.

2. Capability Statements - In addition to the projects listed above, the Offeror must provide:

(a) Summary of your firm’s capability in meeting the FAA’s requirement as described in Attachment I - Draft Statement of Work.

(b) Confirmation of capability to be able to perform the work in Attachment I, Draft Statement of Work, with no less than 25% of its own workforce.

Work includes cost of material and equipment.

(c) Offerors must also provide the firm’s business classification size, along with the appropriate Small Business Administration (SBA) certification if applicable.

(d) Capability of securing a sub-contractor to install the Terazzo flooring that is both an active associate of and certified by the National Terrazzo & Mosaic Associate (NTMA). Sub-contractor must be identified on the NTMA website www.ntma.com. If the FAA awards a contract for this project, it will be a requirement to use an active associate of and certified by the National Terrazzo & Mosaic Associate (NTMA) identified on the NTMA website www.ntma.com.

(e) Demonstrate corporate experience in mitigating health and safety hazards by providing Total Recordable Incident Rate (TRIR) and Experience Modification Rate (EMR).

Provide your firms 2019 OSHA 300A form, summary of work-related injuries and illness.

Provide your firms EMR letter.

(f) Capability of providing a Field Superintendent who possesses the following:

1. Knowledge of state and federal occupational safety and health regulations.

2. Has completed formal educational training in occupational safety and health.

3. Six years of recent work experience in a supervisory position overseeing at least two projects with multiple disciplines/trades with projects with a total minimum value of $1,000,000.00 within the past six years.

4. If this requirement is awarded, it will be a requirement for the Field Superintendent to submit a copy of their current certification in an OSHA sponsored or approved course in http://www.ntma.com/ http://www.ntma.com/

Occupational Safety and Health Standards for the Construction Industry.

(g) Capability of providing a Site Safety and Health Officer (SSHO)* who possess the following:

1. Knowledge of state and federal occupational safety and health regulations.

2. Has completed formal educational training** in occupational safety and health.

3. Six years of recent work experience in overseeing projects with multiple disciplines/trades with projects with a total minimum value of $1,000,000.00 within the past six years.

4. If this requirement is awarded, it will be a requirement for the SSHO to submit a copy of their instructor-signed OSHA 30-hour training card or course completion documentation if within 90 days of having completed the training and card has not yet been issued.

*Note: The Field Superintendent and SSHO cannot be the same person.

** Note: Acceptable training includes one of the following classes:

- 30-hour OSHA General Industry safety class, or

- 30-hour OSHA Construction Industry safety class

As an equivalent to the acceptable training classes listed above, formal construction or industry safety and health training covering the following subjects of the OSHA 30-hour course is acceptable:

a. OSH Act/General Duty Clause

b. 29 CFR 1904, Recordkeeping

c. Subparts C, CC, D, E, F, K and M of OSHA

d. Rigging, load handling equipment (LHE), welding and cutting, scaffolding, excavations, concrete and masonry, demolition, health hazards in construction, materials handling, storage and disposal, hand and power tools, motor vehicles, mechanized equipment, marine operations, steel erection, stairways and ladders, confined spaces or any others that are applicable to the work being performed.

Capability statements must not exceed five (5) pages in length.

Corporate Experience – Building 300 Floor Renovation

Company Name: ______________________________________________

Project Title: ______________________________________________

Project Location: ___________________________________________

Contract Start and Completion Dates: ___________ and ___________ Duration (in months): __________

Contract Type: ___________________________________

Contract Award Amount: ______________

Contract Cost Including Change Orders: ___________________

Type and value of contract work executed by the Offeror:

Brief Project Description:

Did Project involve multiple major building disciplines/trades (reply to 1a, please describe):

Special Project Requirements or Constraints:

Client Name and Address:

Point of Contact (whether the Prime Contractor, Superintendent, or Site Safety and Health officer/SSHO):

Name and Title:

Phone Number(s):

Email Address: _