69056724Q000017.pdf

REQUEST FOR QUOTATION (RFQ)

Issuing Office: United States Department of Transportation

Federal Highway Administration (FHWA) Western Federal Lands Highway Division 610 E Fifth Street

Vancouver, WA 98661-3801

Agency Contact: Doug Taylor, Contract Specialist, (360) 619-7738 Email: WFL.Purchasing@dot.gov

Solicitation Number: 69056724Q000017

Title: Cylindrical Specimen End Grinder system

Solicitation Release Date: 4/02/2024

Technical Questions Due Date: Monday, 4/15/2024, at 4:00 pm PT

Quotation Due Date: Thursday, 4/18/2024, at 2:00 pm PT

69056724Q000017

A-2

SECTION A – RFQ INFORMATION AND

INSTRUCTIONS FOR PREPARATION OF QUOTATIONS

1. RFQ INFORMATION

This combined synopsis/solicitation is prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Items, in conjunction with the policies and procedures for solicitation, evaluation, and award as prescribed in FAR 13, Simplified Acquisition Procedures, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

This is a TOTAL SMALL BUSINESS SET-ASIDE solicitation. The North American Industry Classification System (NAICS) code is 334516 with an industry size standard of 1,000 employees and the associated Product Service Code (PSC) is 6640. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2024-03 effective 2/23/2024.

A responsible quoter is one whose quotation conforms to the solicitation and will be most advantageous to the Government. It is the contractor’s responsibility to be familiar with applicable clauses and provisions. FAR Provisions and Clauses may be viewed and/or downloaded from https://www.acquisition.gov/?q=browsefar.

All contractors are reminded that, in accordance with FAR 52.204-7, System for Award Management (SAM), they must be registered and active in the www.SAM.gov database PRIOR to submission of a quote or offer.

2. INSTRUCTIONS FOR PREPARATION OF QUOTATIONS

All questions concerning this RFQ shall be submitted electronically to WFL.Purchasing@dot.gov, no later than the due date and time on page 1 of this RFQ.

Each prospective Quoter should attempt to state each question in such a way that the Quoter would have no objection to the Government publishing that precise question (and its answer) in a formal amendment to the RFQ. Additionally, each prospective Quoter should attempt to word each question in such a way that the publication of that question (and its answer) would not divulge any information that the prospective Quoter considers to be proprietary or confidential.

In responding to this RFQ, the Contractor shall address an understanding of logistics, schedule, and any other miscellaneous issues of which the Government should be aware. The Contractor shall indicate if any technical assumptions have been made, conditions have been stipulated or exceptions have been taken with the Government Description of Requirement as written. If technical assumptions are not noted, it will be assumed that the vendor’s quote reflects no technical assumptions for the award and agrees to comply with all of the terms and conditions set forth herein.

A-3

Quotations shall be submitted electronically as Adobe (.pdf) files to WFL.Purchasing@dot.gov in an email whose size shall not exceed twenty Megabytes (20MB) no later than the due date and time on page 1 of this RFQ. If multiple emails are required, they shall be identified in sequence (1 of 3, 2 of 3, etc.). Document(s) shall not contain any security restrictions (e.g., password protection) that prevent the Government from distributing and printing the document(s) and shall not include marketing materials or letters of support/recommendation.

Quotations submitted shall be valid for a period of no less than thirty (30) days from the closing date of the RFQ.

Offerors shall not be reimbursed for the costs of developing a quote for this RFQ.

In responding to this RFQ, quotations MUST include the following:

A. Price Quote: Pricing in the format of the Schedule of Items table shown in Section B -or- the same information on a similar, vendor-generated price quote sheet which includes your Unique Entity Identifier (UEI).

B. Technical Quote:

i. Cut sheets and technical specification sheets for all quoted equipment and/or components which demonstrates all minimum requirements are met,

ii. Expressed warranty information,

iii. A copy of the vendor’s FAR Representations and Certifications (FAR Report) from the SAM.gov website,

iv. A completed copy of the Representation and Certifications at TAR 1252.237-71 (see

Section D); and

v. Acknowledgement of all solicitation amendments, if any.

NOTE: Failure to furnish ALL information required above may result in your quotation being considered non-responsive and eliminated from further consideration.

The timeliness of a quote is determined by the date and time of receipt. It is the Quoter’s responsibility to ensure that the quotation submission email is received by the designated cut-off date and time. Early submission is encouraged.

This is an electronic procurement. Hard copies of the quotations will not be accepted.

Please reference the RFQ number in the subject line of any e-mails related to this procurement.

3. EVALUATION AND BASIS FOR AWARD

A-4

The technical evaluation factors for this procurement are Lowest Price Technically Acceptable (LPTA). Criteria under the LPTA process are judged on a pass-fail basis only. No other rating or qualitative value will be assigned. To be determined technically acceptable, all factors must be acceptable to obtain a pass rating for the technical proposal. Award will be made to the lowest price, technically acceptable, responsible offeror, with satisfactory past performance.

A. Right to hold discussions: The Government intends to award without discussions;

however, the Government reserves the right to enter discussions if determined necessary.

Additionally, the Government reserves the right to make no award from this solicitation.

B. Source Selection Evaluation Process: The lowest priced quote will be considered as the quote offering the lowest price on the Schedule of Items grand total. If the lowest-priced quote is determined to be technically acceptable, no other quote will be evaluated. If the lowest-priced quote is determined to NOT be technically acceptable, the next lowest-priced quote will be evaluated. This process will continue until the lowest-priced, technically acceptable quote is identified.

C. The Government will award: A purchase order resulting from this solicitation based on the lowest evaluated price of quotes meeting or exceeding the acceptability standards for non-cost factors. The following factors shall be used to evaluate offers:

i. FACTOR 1 – Price

ii. FACTOR 2 – Technical Compliance with Solicitation Requirements

iii. FACTOR 3 – Relevant Past/Present Performance

Technical compliance and past/present performance, when combined, are approximately equal to price. By submission of its quote, the contractor accepts all RFQ requirements, including terms and conditions, representations and certifications, and technical requirements. The Government intends to select ONE Contractor for the award of this requirement.

4. EVALUATION CRITERIA

The Government will evaluate the quotations and make an award decision based on the following factors:

A. Factor 1 – Price: Offeror must submit a completed price quote in the format of the Schedule of Items table shown in Section B -or- the same information on a similar, vendor-generated price quote sheet including the Unique Entity Identifier (UEI). The Government will evaluate the total quoted price to determine that the price is valid and realistic as well as for consistency and understanding of the SOW requirements.

The Government may reject any quote that is evaluated to be unrealistic in terms of program commitments, including contract terms and conditions, or unrealistically high or low in cost/price, or are unbalanced, such that the offer is deemed to reflect an inherent

A-5 lack of competence or failure to comprehend the technical requirements.

Award will be made to the Offeror found to be technically acceptable that offers the lowest total price submitted on the base and all options, if any.

B. Factor 2 – Technical Compliance with Solicitation Requirements: Offeror must comply with ALL instructions and submit ALL items as stated in Section A, paragraph 2 of the solicitation. Quotes will be evaluated on a pass/fail basis with respect to this evaluation factor.

i. TECHNICALLY ACCEPTABLE: Complied with ALL instructions and submitted

ALL required information as identified in Section A of the solicitation.

ii. TECHNICALLY UNACCEPTABLE:

(1) Did NOT comply with ALL instructions as stated in Section A of the solicitation, or

(2) Did NOT provide all required information as identified in Section A of the solicitation, or

(3) Provided information does NOT demonstrate all minimum requirements are met.

C. Factor 3 – Past Performance: The Offeror’s relevant past performance provides assurance that the contractor will meet or exceed all solicitation requirements. The Offeror’s relevant past performance should demonstrate that within the past three years they have successful past performance meeting and/or performing contract requirements of similar size and scope.

Evaluation of past performance may be based on information obtained from references submitted by the offeror as well as information obtained from other sources such as CPARS, FAPPIS, PPIRS, SAM, and any other sources deemed necessary by the Contracting Officer. Only ongoing contracts and contracts completed within the past three years will be evaluated with respect to past performance.

i. TECHNICALLY ACCEPTABLE: Based on the Government’s review:

(1) Evaluation(s) reflect no unsatisfactory ratings, no more than 2 marginals, and the CO has no other information that would lead the CO to conclude that there are significant problems with Offeror’s past performance; or

(2) Past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the Offeror shall be determined to have unknown (or neutral) past performance.

ii. TECHNICALLY UNACCEPTABLE: Based on the Government’s review, evaluation(s) reflect:

(1) 1 or more unsatisfactory rating; or

(2) 3 or more marginal ratings; or

(3) the CO has other information that would lead the CO to conclude that there are significant problems with Offeror’s past performance.

B-1

SECTION B – SCHEDULE OF SUPPLIES

The Contractor shall furnish all supplies under this purchase order in support of the mission of the FHWA.

CLIN DESCRIPTION TOTAL PRICE

00101

Cylindrical Specimen End Grinder (also known as (Cylindrical Concrete Laboratory Sample and Rock Core Laboratory Sample End-Surface Preparation Apparatus) for use with 100mm concrete specimens, and 60mm rock core specimens

Pricing: Firm Fixed Price

UOM::EA::QTY::1

00201

Shipping and Handling FOB Destination to Vancouver, WA

Pricing: Firm Fixed Price

UOM::EA::QTY::1

GRAND TOTAL $

UNIQUE ENTITY IDENTIFIER (SAM UEI):

C-1

SECTION C – STATEMENT OF REQUIREMENT

1. BACKGROUND

Western Federal Lands Highway Division (WFLHD), a division of the US Department of Transportation – Federal Highway Administration, designs and administers, primarily, road construction projects on Federal Lands in the states of Alaska, Washington, Oregon, Idaho, Montana, and Wyoming. The type of construction is generally 2‐lane roads or highways either accessing Federal lands or within Federal lands.

2. OBJECTIVE

The objective of this requirement is to support WFLHD operations by obtaining Cylindrical Specimen End Grinder for the proper preparation of both rock core and concrete specimens to applicable testing standards.

3. REQUIREMENT DESCRIPTION

The complete Cylindrical Specimen End Grinder system shall consist of an apparatus capable of surface grinding cylindrical concrete specimens, to create a surface which is plane to 0.002” for the circular ends of the specimen, and which is perpendicular to the axis of the concrete cylinder, as per AASHTO T22, Section 7.2.

For rock cores with a nominal diameter of 2.4”, the apparatus shall similarly create a set of top and bottom surfaces for the rock core, which meets the requirements laid out in ASTM D4543; for this particular standard, the planeness requirement is to 0.001”, rather than the planeness requirement noted for cylindrical concrete specimens.

This surfacing operation shall take place in an enclosed chamber provided with a constant water stream, to mitigate safety hazards from inhalation of concrete/rock dust; and provided with a clamping system to hold the specimens securely in place during grinding.

*NOTES* 1. If an apparatus does not exist/is not available that meets both the concrete and rock core requirements, the AASHTO T22 requirements shall be considered the primary requirements.

2. Offered apparatus must be compliant in accordance with FAR 52.225-1, Buy

American-Supplies, and the offeror must complete FAR 52.225-2, Buy American Certificate (see Section D), if applicable.

** If no BAA compliant apparatus exists, please advise the Contract Specialsist indicated on the cover page of this RFQ

4. SPECIFICATIONS

The following specifications shall comprise a single deliverable unit, known as a CONCRETE

CYLINDER GRINDER:

C-2

A. Technical

i. Electrical: 110 vac 60 Hz 1 ph

ii. Electrical Approvals: UL, NEC, CSA (equivalent)

iii. Application

a. AASHTO T 22 (Test Method for Comp Str of Cylindrical Concrete Specimens)

b. ASTM D4543 (Practice for Preparing Rock Core as Cylindrical Test Specimens)

iv. Capacity

a. 2 x 150mm (6“) diameter specimens (requires diameter-specific jig)

b. 3 x 100mm (4”) diameter specimens (requires diameter-specific jig)

c. 3 x 50/60mm (2” or 2.4”) diameter specimens (requires diameter-specific jig)

v. Operational components:

a. A grinding disc capable of producing the planeness requirements noted above.

The approximate grinding lifespan of this disc shall be 3000 to 5000 specimens

b. A continuous water stream injected into chamber to aid in grinding and mitigate dust

c. A collection reservoir for the water and concrete/rock ‘slurry’ produced during grinding

d. An adjustable means of covering the grinding wheel and grinding chamber, to prevent:

(1) Any opportunity to insert a body part into the chamber,

(2) Inhalation of cement/rock dust, and

(3) Prevention of slurry and/or concrete/rock chips flying out during grinding

e. A modular (i.e., reconfigurable) set of clamping jigs with the following capabilities:

(1) Provide positive control of the cylindrical specimen(s) during grinding,

(2) A series of ‘V’ shaped channel-clamps into which specimens are placed, and

(3) A means to drive the jig (and therefore specimens) forward into the grinding wheel, with manual and/or electronic control system.

(4) Grinding operations shall take generally 60-120 seconds, but can be configurable to allow for slower grinding speeds.

B. Accessories. All clamps / jigs as necessary to achieve planeness and perpendicularity as per AASHTO T22 / ASTM D4543 (with preference for AASHTO T22; see above).

C. Calibration / Certification. Contractor shall provide certificate showing that unit can achieve planeness requirements AASHTO T22 / ASTM D4543 (with preference for

AASHTO T22).

D. Installation and Training. Contractor shall provide documentation entailing:

i. Uncrating and Inspection

ii. Installation Instructions

C-3

iii. Guide for Safe Operation of Unit

iv. Operating Instructions

v. Maintenance Instructions

5. DELIVERY

The Contractor shall make use of commercial best practices in packing and shipment F.O.B.

Destination no more than sixty (60) days after receipt of order to:

Western Federal Lands Highway Division Attn: Materials Lab 610 East Fifth Street Vancouver, WA 98661-3801

6. INSPECTION AND ACCEPTANCE

All supplies and/or work hereunder shall be subject to review by the Government. The Technical Point of Contact (TPOC) is responsible for the inspection and acceptance of all incoming shipments, documents, and services. Acceptance of the final deliverables shall be made in writing by the TPOC.

7. AUTHORITY TO OBLIGATE THE GOVERNMENT

The Contracting Officer is the only individual who can legally commit or obligate the Government to the expenditure of public funds. No cost chargeable to the proposed task order can be incurred before receipt of a fully executed task order or specific authorization from the Contracting Officer.

8. PAYMENT FOR UNAUTHORIZED WORK

No payments will be made for any unauthorized supplies and/or services or for any unauthorized changes to the work specified herein. This includes any services performed by the Contractor of their own volition or at the request of an individual other than a duly appointed Contracting Officer. Only a duly appointed Contracting Officer is authorized to change the specifications, terms, and conditions under this effort.

9. CLOSEOUT OF CONTRACT FILES

The Government will initiate the administrative closeout of the Delivery Order after receiving evidence that all technical requirements have been completed. The Contractor shall furnish all required documents in support of the closeout of this contract.

The Government anticipates the timeframe to complete the administrative close out of this contract will not exceed thirty (30) days. The costs incurred in the administrative closeout of task orders and contract files are unallowable direct costs under the contract and, therefore, cannot be charged as direct costs to the Government. Contractors are to handle such costs in accordance with their disclosure statements/cost accounting systems.

D-1

SECTION D – SOLICITATION PROVISIONS

Representations, Certifications, and Other Statements of Quoter

The offeror makes the following representations and certifications as a part of its quote.

Federal Acquisition Regulation (FAR) Provisions

52.252-1 -- Solicitation Provisions Incorporated by Reference (Feb 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at https://www.acquisition.gov/far.

52.203-18 -- Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation (Jan 2017) 52.204-7 -- System for Award Management (Oct 2018) 52.204-16 -- Commercial and Government Entity Code Reporting (Oct 2018) 52.204-22 -- Alternative Line Item Proposal (Jan 2017) 52.212-1 -- Instructions to Offerors—Commercial Products and Commercial Services (Sep 2023) 52.212-3 -- Offeror Representations and Certifications—Commercial Products and Commercial Services (Feb 2024)

(End of provision)

52.204-24 -- Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the

Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Products or Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision—

Backhaul, covered telecommunications equipment or services, critical technology, D-2 interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract.

Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award

Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”.

(d) Representation. The Offeror represents that—

(1) It [ ] will, [ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds “will” in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that—

It [ ] does, [ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or

D-3 services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds “does” in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded “will” in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number;

and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded “does” in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number;

and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant

D-4 to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 -- Covered Telecommunications Equipment or Services-Representation (Oct 2020)

(a) Definitions. As used in this provision, "covered telecommunications equipment or services" and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award

Management (SAM) ( https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(c)(1) Representation. The Offeror represents that it [ ] does, [ ] does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instruments.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it [ ] does, [ ] does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

(End of provision)

52.204-29 Federal Acquisition Supply Chain Security Act Orders—Representation and Disclosures (Dec 2023)

(a) Definitions. As used in this provision, Covered article, FASCSA order, Intelligence community, National security system, Reasonable inquiry, Sensitive compartmented information, Sensitive compartmented information system, and Source have the meaning provided in the clause 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.

(b) Prohibition. Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the prohibition is set out in an applicable Federal Acquisition Supply Chain Security Act (FASCSA) order, as described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.

(c) Procedures.

(1) The Offeror shall search for the phrase “FASCSA order” in the System for Award Management (SAM)( https://www.sam.gov) for any covered article, or any products or services produced or provided by a source, if there is an applicable FASCSA order described in paragraph (b)(1) of FAR 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition.

D-5

(2) The Offeror shall review the solicitation for any FASCSA orders that are not in SAM, but are effective and do apply to the solicitation and resultant contract (see FAR 4.2303(c)(2)).

(3) FASCSA orders issued after the date of solicitation do not apply unless added by an amendment to the solicitation.

(d) Representation. By submission of this offer, the offeror represents that it has conducted a reasonable inquiry, and that the offeror does not propose to provide or use in response to this solicitation any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order in effect on the date the solicitation was issued, except as waived by the solicitation, or as disclosed in paragraph (e).

(e) Disclosures. The purpose for this disclosure is so the Government may decide whether to issue a waiver. For any covered article, or any products or services produced or provided by a source, if the covered article or the source is subject to an applicable FASCSA order, and the Offeror is unable to represent compliance, then the Offeror shall provide the following information as part of the offer:

(1) Name of the product or service provided to the Government;

(2) Name of the covered article or source subject to a FASCSA order;

(3) If applicable, name of the vendor, including the Commercial and Government Entity code and unique entity identifier (if known), that supplied the covered article or the product or service to the Offeror;

(4) Brand;

(5) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);

(6) Item description;

(7) Reason why the applicable covered article or the product or service is being provided or used;

(f) Executive agency review of disclosures. The contracting officer will review disclosures provided in paragraph (e) to determine if any waiver may be sought. A contracting officer may choose not to pursue a waiver for covered articles or sources otherwise subject to a FASCSA order and may instead make an award to an offeror that does not require a waiver.

52.225-2 Buy American Certificate (Oct 2022)

(a)(1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component.

(2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent

D-6 domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select “no”.

(3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105).

(4) The terms “commercially available off-the-shelf (COTS) item,” “critical component,” "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies."

(b) Foreign End Products:

Line Item No. Country of Origin Exceeds 55% domestic content (yes/no)

(b) [List as necessary]

(c) Domestic end products containing a critical component:

Line Item No. ___ [List as necessary]

(d) The Government will evaluate offers in accordance with the policies and procedures of Part 25 of the Federal Acquisition Regulation.

D-7

Transportation Acquisition Regulation (TAR) Provisions

1252.237-71 -- Certification of Data (Nov 2022)

(a) The offeror represents and certifies that to the best of its knowledge and belief, the information and/or data (e.g., company profile; qualifications; background statements;

brochures) submitted with its offer is current, accurate, and complete as of the date of its offer.

(b) The offeror understands that any inaccurate data provided to the Department of

Transportation may subject the offeror, its subcontractors, its employees, or its representatives to:

(1) prosecution for false statements pursuant to 18 U.S.C. 1001; and/or

(2) enforcement action for false claims or statements pursuant to the Program Fraud Civil

Remedies Act of 1986, 31 U.S.C. 3801– 3812 and 49 CFR part 31; and/or

(3) termination for default or for cause under any contract resulting from its offer; and/or

(4) debarment or suspension.

(c) The offeror agrees to obtain a similar certification from its subcontractors and submit such certification(s) with its offer.

Signature:

Date:

Typed Name and Title:

Company Name:

This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under 18 U.S.C. 1001.

E-1

SECTION E – CONTRACT CLAUSES

Federal Acquisition Regulation (FAR) Clauses

52.252-2 -- Clauses Incorporated by Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at https://www.acquisitions.gov/?q=browsefar

52.204-13 -- System for Award Management Maintenance (Oct 2018) 52.204-18 -- Commercial and Government Entity Code Maintenance (Aug 2020) 52.204-19 -- Incorporation by Reference of Representations and Certifications (Dec 2014) 52.204-21 -- Basic Safeguarding of Covered Contractor Information Systems (Nov 2021) 52.212-4 -- Contract Terms and Conditions – Commercial Products and Commercial Services (Nov 2023) 52.232-39 -- Unenforceability of Unauthorized Obligations (Jun 2013) 52.232-40 -- Providing Accelerated Payments to Small Business Subcontractors (Mar 2023)

(End of clause)

52.204-30 -- Federal Acquisition Supply Chain Security Act Orders – Prohibition (Dec 2023)

(a) Definitions. As used in this clause—

Covered article, as defined in 41 U.S.C. 4713(k), means—

(1) Information technology, as defined in 40 U.S.C. 11101, including cloud computing services of all types;

(2) Telecommunications equipment or telecommunications service, as those terms are defined in section 3 of the Communications Act of 1934 ( 47 U.S.C. 153);

(3) The processing of information on a Federal or non-Federal information system, subject to the requirements of the Controlled Unclassified Information program (see 32 CFR part 2002);

or

(4) Hardware, systems, devices, software, or services that include embedded or incidental information technology.

FASCSA order means any of the following orders issued under the

Federal Acquisition Supply Chain Security Act (FASCSA) requiring the removal of covered articles from executive agency information systems or the exclusion of one or more named sources or named covered articles from executive agency procurement actions, as described in 41 CFR 201–1.303(d) and (e):

(1) The Secretary of Homeland Security may issue FASCSA orders applicable to civilian agencies, to the extent not covered by paragraph (2) or (3) of this definition. This type of

E-2

FASCSA order may be referred to as a Department of Homeland Security (DHS) FASCSA order.

(2) The Secretary of Defense may issue FASCSA orders applicable to the Department of Defense (DoD) and national security systems other than sensitive compartmented information systems. This type of FASCSA order may be referred to as a DoD FASCSA order.

(3) The Director of National Intelligence (DNI) may issue FASCSA orders applicable to the intelligence community and sensitive compartmented information systems, to the extent not covered by paragraph (2) of this definition. This type of FASCSA order may be referred to as a DNI FASCSA order.

Intelligence community, as defined by 50 U.S.C. 3003(4), means the following—

(1) The Office of the Director of National Intelligence;

(2) The Central Intelligence Agency;

(3) The National Security Agency;

(4) The Defense Intelligence Agency;

(5) The National Geospatial-Intelligence Agency;

(6) The National Reconnaissance Office;

(7) Other offices within the Department of Defense for the collection of specialized national intelligence through reconnaissance programs;

(8) The intelligence elements of the Army, the Navy, the Air Force, the Marine Corps, the

Coast Guard, the Federal Bureau of Investigation, the Drug Enforcement Administration, and the Department of Energy;

(9) The Bureau of Intelligence and Research of the Department of State;

(10) The Office of Intelligence and Analysis of the Department of the Treasury;

(11) The Office of Intelligence and Analysis of the Department of Homeland Security; or

(12) Such other elements of any department or agency as may be designated by the

President, or designated jointly by the Director of National Intelligence and the head of the department or agency concerned, as an element of the intelligence community.

National security system, as defined in 44 U.S.C. 3552, means any information system

(including any telecommunications system) used or operated by an agency or by a contractor of an agency, or other organization on behalf of an agency—

(1) The function, operation, or use of which involves intelligence activities; involves cryptologic activities related to national security; involves command and control of military forces; involves equipment that is an integral part of a weapon or weapons system; or is critical to the direct fulfillment of military or intelligence missions, but does not include a system that is to be used for routine administrative and business applications (including payroll, finance, logistics, and personnel management applications); or

(2) Is protected at all times by procedures established for information that have been specifically authorized under criteria established by an Executive order or an Act of Congress to be kept classified in the interest of national defense or foreign policy.

Reasonable inquiry means an inquiry designed to uncover any information in the entity's possession about the identity of any covered articles, or any products or services produced or provided by a source. This applies when the covered article or the source is subject to an

E-3 applicable FASCSA order. A reasonable inquiry excludes the need to include an internal or third-party audit.

Sensitive compartmented information means classified information concerning or derived from intelligence sources, methods, or analytical processes, which is required to be handled within formal access control systems established by the Director of National Intelligence.

Sensitive compartmented information system means a national security system authorized to process or store sensitive compartmented information.

Source means a non-Federal supplier, or potential supplier, of products or services, at any tier.

(b) Prohibition.

(1) Unless an applicable waiver has been issued by the issuing official, Contractors shall not provide or use as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA orders as follows:

(i) For solicitations and contracts awarded by a Department of Defense contracting office, DoD FASCSA orders apply.

(ii) For all other solicitations and contracts DHS FASCSA orders apply.

(2) The Contractor shall search for the phrase “FASCSA order” in the System for Award

Management (SAM) at https://www.sam.gov to locate applicable FASCSA orders identified in paragraph (b)(1).

(3) The Government may identify in the solicitation additional FASCSA orders that are not in SAM, which are effective and apply to the solicitation and resultant contract.

(4) A FASCSA order issued after the date of solicitation applies to this contract only if added by an amendment to the solicitation or modification to the contract (see FAR 4.2304(c)).

However, see paragraph (c) of this clause.

(5)

(i) If the contractor wishes to ask for a waiver of the requirements of a new FASCSA order being applied through modification, then the Contractor shall disclose the following:

(A) Name of the product or service provided to the Government;

(B) Name of the covered article or source subject to a FASCSA order;

(C) If applicable, name of the vendor, including the Commercial and Government

Entity code and unique entity identifier (if known), that supplied or supplies the covered article or the product or service to the Offeror;

(D) Brand;

(E) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);

(F) Item description;

(G) Reason why the applicable covered article or the product or service is being provided or used;

(ii) Executive agency review of disclosures. The contracting officer will review disclosures provided in paragraph (b)(5)(i) to determine if any waiver is warranted. A contracting officer may choose not to pursue a waiver for covered articles or sources otherwise covered by a FASCSA order and to instead pursue other appropriate action.

E-4

(c) Notice and reporting requirement.

(1) During contract performance, the Contractor shall review SAM.gov at least once every three months, or as advised by the Contracting Officer, to check for covered articles subject to FASCSA order(s), or for products or services produced by a source subject to FASCSA order(s) not currently identified under paragraph (b) of this clause.

(2) If the Contractor identifies a new FASCSA order(s) that could impact their supply chain, then the Contractor shall conduct a reasonable inquiry to identify whether a covered article or product or service produced or provided by a source subject to the FASCSA order(s) was provided to the Government or used during contract performance.

(3)

(i) The Contractor shall submit a report to the contracting office as identified in paragraph (c)(3)(ii) of this clause, if the Contractor identifies, including through any notification by a subcontractor at any tier, that a covered article or product or service produced or provided by a source was provided to the Government or used during contract performance and is subject to a FASCSA order(s) identified in paragraph (b) of this clause, or a new FASCSA order identified in paragraph (c)(2) of this clause. For indefinite delivery contracts, the Contractor shall report to both the contracting office for the indefinite delivery contract and the contracting office for any affected order.

(ii) If a report is required to be submitted to a contracting office under (c)(3)(i) of this clause, the Contractor shall submit the report as follows:

(A) If a Department of Defense contracting office, the Contractor shall report to the website at https://dibnet.dod.mil.

(B) For all other contracting offices, the Contractor shall report to the Contracting Officer.

(4) The Contractor shall report the following information for each covered article or each product or service produced or provided by a source, where the covered article or source is subject to a FASCSA order, pursuant to paragraph (c)(3)(i) of this clause:

(i) Within 3 business days from the date of such identification or notification:

(A) Contract number;

(B) Order number(s), if applicable;

(C) Name of the product or service provided to the Government or used during performance of the contract;

(D) Name of the covered article or source subject to a FASCSA order;

(E) If applicable, name of the vendor, including the Commercial and Government

Entity code and unique entity identifier (if known), that supplied the covered article or the product or service to the Contractor;

(F) Brand;

(G) Model number (original equipment manufacturer number, manufacturer part number, or wholesaler number);

(H) Item description; and

(I) Any readily available information about mitigation actions undertaken or recommended.

(ii) Within 10 business days of submitting the information in paragraph (c)(4)(i) of this clause:

E-5

(A) Any further available information about mitigation actions undertaken or recommended.

(B) In addition, the Contractor shall describe the efforts it undertook to prevent submission or use of the covered article or the product or service produced or provided by a source subject to an applicable FASCSA order, and any additional efforts that will be incorporated to prevent future submission or use of the covered article or the product or service produced or provided by a source that is subject to an applicable FASCSA order.

(d) Removal. For Federal Supply Schedules, Governmentwide acquisition contracts, multi-agency contracts or any other procurement instrument intended for use by multiple agencies, upon notification from the Contracting Officer, during the performance of the contract, the Contractor shall promptly make any necessary changes or modifications to remove any product or service produced or provided by a source that is subject to an applicable FASCSA order.

(e) Subcontracts.

(1) The Contractor shall insert the substance of this clause, including this paragraph (e) and excluding paragraph (c)(1) of this clause, in all subcontracts and other contractual instruments, including subcontracts for the acquisition of commercial products and commercial services.

(2) The Government may identify in the solicitation additional FASCSA orders that are not in SAM, which are effective and apply to the contract and any subcontracts and other contractual instruments under the contract. The Contractor or higher-tier subcontractor shall notify their subcontractors, and suppliers under other contractual instruments, that the FASCSA orders in the solicitation that are not in SAM apply to the contract and all subcontracts.

(End of clause)

52.212-5 -- Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Products and Commercial Services (Feb 2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) ( 31 U.S.C. 3553).

E-6

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108- 77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the

Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) ( 41 U.S.C. 4704 and 10 U.S.C. 4655).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) ( 41 U.S.C.

3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X_ (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C.

4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

__ (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C.