6611 Motor Grader Spec Sheet.pdf
PDF 127 KB Posted
- Solicitation number
- 1282A726Q0019
- Issued by
-
Department of Agriculture Forest Service
About this file
This document is a Motor Grader Specifications sheet for the USDA US Forest Service, Anaconda Job Corps facility located at 1384 Foster Creek Road, Anaconda, Montana 59711. The requestor is Dan Zeier (406-563-8739, daniel.p.zeier@usda.gov).
The specifications require an all-wheel drive motor grader with an operating weight between 33,000 and 45,000 lbs., equipped with a minimum 180 net horsepower turbocharged diesel engine with direct injection and 6 cylinders. The transmission must be industry standard powershift with 8 forward gears and 8 reverse gears. The grader must feature a 14-foot-wide moldboard with impact-absorption systems, equipped with XSNOPLUS M&S Michelin Tires or approved equivalent (minimum 14R24 snow tires), and include a Henke or approved equivalent power reversing angle dozer blade (10 feet wide) that attaches to a front scarifier for easy removal. A rear-mounted ripper/scarifier toolbar combination with rear hitch and pin is required, including 3 ripper shanks and 9 scarifier shanks with teeth. Additional specifications include a low-profile deluxe fully enclosed cab with ROPS/FOPS/sound reduction, air conditioning and heating, fabric air suspension heated seat, 24-volt electrical system with master battery disconnect, cold weather package with block heater, hydraulic power steering and wet brakes, closed-center variable-displacement pump with load-sensing capability, 10 halogen lights (4 transport plus 6 work lights), and extensive locking compartments and security features. The document recommends purchase of John Deere, CAT, or Case equipment due to superior local maintenance support, specifically noting that manufacturers such as Volvo, Champion, or other off-brands do not offer adequate local support.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sources Sought 13 Feb 2026.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Motor Grader Specifications-AWD
Name: Dan Zeier Phone: 406-563-8739 Email: daniel.p.zeier@usda.gov
Agency: USDA US Forest Service Office: Anaconda Job Corps
Address: 1384 Foster Creek Road City/State/Zip: Anaconda, Mt. 59711 dozer blade 10 ft. wide that attaches to the front scarifier to allow for removal.
Requestor Information
Delivery Location
Notes:
(Fill out all that apply, Delete features that aren't required, Insert New Features, attach supplementary information if necessary)
Grader size to be a minimum of 33,000 lbs. with minimum 180 net horsepower turbocharged diesel engine, powershift transmission, all-wheel drive fitted with XSNOPLUS M&S Michelin Tires or approved equivalent. A Henke or approved equivalent power reversing angle
Scope:
mailto:daniel.p.zeier@usda.gov
Min (lbs.): 33,000 Max (lbs.): 45,000
Standard mechanical lever controls on slide back adjustable console. (Industry standard controls) Plus 1 additional control w/float option for front dozer blade located on right hand control bank.
Plus 1 additional control w/float option for rear scarifier/toolbar attachment located on left hand control bank.
Front window moveable sun visor Retractable rear sun shade Power cab pre-cleaner Flip down cab beacon with bracket Cab prewired for beacon, radio, and auxiliary circuits Two heated exterior rearview mirrors Steering wheel
3" Retractable seatbelt Tilt steering Hand and foot throttles
Electric horn
Vandal-protection locking for cab doors and compartments Upper front and rear windshield intermittent wiper and washers Lower front intermittent wiper and washers
Air conditioning and heating
Full instrumentation indicators with hour meter and audible alarm system Reversing back-up alarm
AM/FM radio with auxiliary input and weather band
10 Halogen lights required (no led) 4 transporting plus (6) additional work lights (2 bottom cab, 2 mid-frame, 2 reversing lights on rear grill)
Low profile deluxe fully enclosed cab with rops/fops/sound reduction system and lockable doors on both sides
On-road capable with running lights, turn and brake signals both front and rear
Fabric air suspension heated seat with adjustable armrests and headrests
Cab:
Operating Weight
Deluxe cab with sound reduction
Min (hp): 180 Max (hp): 250
Diesel Turbocharged extended life
Min (gal): 65 Max (gal): 125
24 V
AWD
Transmission:
Industry Standard Forward Gears:
Reverse Gear:
Turbo charged Direct injection
Horsepower:
Type:
Number of Cylinders:
Engine Coolant:
Master battery disconnect system Two heavy duty 12 volt batteries with minimum 800 CCA each
Engine
Electrical
Power Train
Cold weather package including block heater (120 volt/ 1500 watt minimum) Engine exhaust with flat black stack Fluid sampling ports for engine oil and coolant, hydraulic oil, and axle and transmission fluids
Ground level fuel and diesel exhaust fluid filling All filters easy access through side panels Severe duty fuel and water filtration system
Environmental drains with hoses for engine, transmission, hydraulics, differential fluids and engine
Quick service ports for fluids
24 Volt system
12 Volt power points ( 2 located in cab ) 24 To 12 volt power converter (30 amp peak / 25 amp continuous) 130 Amp Alternator Left-hand engine compartment service check lights Right-hand engine compartment service check lights Electronic corrosion prevention package
Fuel Tank Capacity:
Drive Train:
Voltage:
Cold weather starting assist (Glow plugs/Ether/Grid Heater)
Pump Capacity (gpm):
Min: Industry Standard Max: Industry Standard
Pressure (psi):
Min: Industry Standard Max: Industry Standard
Front Tire Size:
Min: 14R24 Snow Tires
Rear Tire Size:
Min: 14R24 Snow Tires
Ply's:
Number: Industry Standard
Width min (ft.): 14 max (ft.): 14
Cutting Edge: Industry Standard
Manuals ( operator, service, repair, and parts ) 1 set-English Side steps Fire extinguisher with bracket mounted in cab Matching spare tire and wheel
Front and rear led turn signals and marker lights; led brake and hazard warning lights
Rear mounted ripper/scarifier toolbar combination with rear hitch and pin. ( Including 3 ripper shanks w/teeth and 9 scarifier shanks w/teeth)
Front mounted scarifier.
Options
Hydraulic pump disconnect Closed-center, pressure-compensated load-sensing, variable-displacement pump
Rear differential lock Transmission solenoid valve guard
Power hydraulic steering Power hydraulic wet brakes Hydraulic auto reversing fan All season synthetic hydraulic oil
Hydraulic system
Tires
Moldboard
Heavy duty 1 Piece rims with valve stem protectors
Moldboard- impact-absorption system Blade-impact-absorption system Dual impact circle drive gearbox with slip clutch
Locking top tank radiator access door Locking fuel tank door and cap
Engine coolant surge tank inside engine compartment Battery- disconnect switch inside engine compartment Ground- level electrical master disconnect switch inside engine compartment Full bottom guard with access panel and side guards for rear vehicle protection
Locking engine compartment doors
Locking toolbox steel constructed, mounted on draft frame, 19l x 6w x 6 ½ d minimum to 24l x 8w x 8d maximum in size.
Locking hydraulic reservoir cap
RECOMMEND PURCHASE OF A JOHN DEERE, CAT, OR CASE DUE TO MAINTENANCE SUPPORT.
MANUFACTURER'S SUCH VOLVO, CHAMPION OR OTHER OFF-BRANDS DO NOT OFFER LOCAL
SUPPORT.
Grader-AWD
File details come from the government source that posted it. Updated .