63093281144_CLIN_STRUCTURE.docx

63093281144 CLIN STRUCTURE

Total Price

b. Prepare calculations to determine required BTUs and recommended number, size, and model of infrared heavy duty heater(s) to be used. Calculations are to be submitted to the NIWTP for review and approval.

c. Prepare drawing depicting proposed improvements including conduit routes; conduit size and material; conductor numbers and sizes; heater locations, type, orientation, and mounting details for heaters; and single line diagram depicting control panel, circuits and breakers. The drawing is to be submitted to the NIWTP for approval prior to commencing work.

d. Install new branch circuit(s) from existing 30KVA Transformer Feed Panel B located on the north end of the belt press area to locations of new infrared heaters, including required GS conduit, conductors, brackets, clamps, fittings, j-boxes.

e. Supply and install infrared heavy duty heaters as per approved drawings and manufacturer’s instructions.

f. Make all terminations at power panels and new heaters.

g. All work shall be in compliance with the latest edition of the National Electrical Code (NEC).

h. The contractor is responsible for determining size of conduit and conductors in compliance with the NEC. Installations are to be fit for exterior conditions and watertight.

i. New installations shall not create a hazard to personnel operating the facility.

j. Work is to be carried out as a single project.

TOTAL