60838326 data.pdf
PDF 141 KB Posted
- Attached to
- PLATE
- Solicitation number
- SPMYM226Q7167
About this file
This is a Material Ordering Data document for a federal contract (IDN: N4523A 6083-8326, ICN: 38OE959650) specifying the procurement of nickel-chromium-molybdenum alloy plate material. The ordering data references ASTM B-443 standard specification dated August 10, 2000 (reapproved 2009) and covers two alloy types: UNS N06625 (Inconel 625) and UNS N06219. The contract requires one piece of plate material with specific dimensions: 0.500 inches thickness, 36 inches width, and 48 inches length. The material must be UNS N06625, Grade 1 (Annealed), in a hot-rolled annealed condition and descaled finish. The ordering data indicates that Grade 1 will be supplied if no grade specification is provided.
The contract imposes several quality and documentation requirements on the supplier. Manufacturer's certification is required, stating that material was manufactured, tested, and inspected in accordance with the specification, with test results on representative samples provided to demonstrate compliance. Samples for product (check) analysis are also required per section 5.2. The purchaser does not wish to witness tests or inspection at the place of manufacture. The document was prepared by Wayne Booher and assigned code 127.2.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CDRLS COMBINED.pdf | ||
| Solicitation - SPMYM226Q7167.pdf | ||
| 60838327 data.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
IDN: N4523A 6083-8326
ICN: 38OE959650 KO: S04 KOI: 001
Paragraph 4.1 Ordering Data
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip, ASTM B-443, dtd 8-10-2000 (Reapproved 2009)
4.1.2 UNS number: N06625
4.1.3 Condition:
UNS N06625 (If neither grade of N06625 is specified, Grade 1 will be supplied)
Grade 1 (Annealed)
Grade 2 (Solution Annealed)
UNS N06219
Solution annealed only
4.1.4 Finish:
Plate:
Hot-rolled annealed or solution annealed, and descaled.
Cold-rolled annealed or solution annealed, and descaled.
Sheet:
Hot-rolled annealed or solution annealed, and descaled.
Cold-rolled annealed or solution annealed descaled or bright annealed.
Strip:
Cold-rolled annealed or solution annealed descaled or bright annealed.
4.1.5 Dimensions: Thickness .500" Width 36" Length 48"
4.1.6 Quantity: 1EA
4.1.7 Optional Requirements:
Sheet furnished in: coil or cut straight lengths or random straight lengths
Strip furnished in: coil or cut straight lengths or random straight lengths
Plate cut to (see 7.2.1 and 7.3.2):
4.1.8 Certification is required
If required, manufacturer’s certification shall be furnished stating that the material was manufactured, tested, and inspected in accordance with this specification, and that test results on representative samples meet specification requirements.
Test results shall be furnished.
4.1.9 Samples for Product (Check) Analysis are required - (see 5.2)
4.1.10 Purchaser Inspection: Purchaser does not wish to witness tests or inspection of material at place of manufacture.
Additional Data Requirements: PLATE, NICKEL ALLOY
.500" THK 36” X 48”
INCONEL 625, ASTM B443, ALLOY N06625, GRADE 1, ANNEALED HOT ROLLED
Prepared By: Wayne Booher
Code: 127.2
File details come from the government source that posted it. Updated .