60683036-DWG RT-250901_Redacted_.pdf
PDF 1 MB Posted
- Attached to
- TANK
- Solicitation number
- SPMYM226Q7021
About this file
This is a technical drawing set for tank replacement at Puget Sound Naval Shipyard, Department of the Navy, Production Engineering and Facilities Division in Bremerton, Washington. The drawing package consists of 9 sheets providing manufacturing specifications and detailed designs for seven lined tanks to be fabricated from 304 stainless steel with PVC liners.
The tank list specifies the following requirements: Tank F1 (3' x 3' x 3'D, 1/4" stainless steel, 3/16" PVC liner, 16% HCl); Tank F1A (3' x 3' x 3'D, matching specifications, 16% HCl); Tank F2 (6' x 3' x 3'D, 1% HCl); Tank H5 (8' x 3' x 5'D, 1% Sulfuric Acid); Tank H8 (8' x 3' x 5'D, 5% Boric Acid and 2.5% Nickel Chloride); Tank H2B (4' x 3' x 5'D, 20% Nickel Chloride and 6% HCl); and Tank J7 (2' x 1' x 1'4"D, 10 Gauge stainless steel, 1% Sulfuric Acid). General notes require all fittings, angles, and square tubes to match tank material; continuous welds ground internally; flanged and lined outlets; external surfaces sand-blasted and epoxy-coated with light gray, room-temperature cure coating; Schedule 80 piping for inlets and outlets unless otherwise noted; and counter-current barriers in rinse tanks fabricated from 1/4" PVC with adequate support. Fabrication tolerances are specified as linear dimensions X.X ±0.1, X.XX ±0.01, X.XXX ±0.005 inches, and angular dimensions X ±1°, X.X ±0.5°. The drawing was dated August 27, 2025.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPMYM226Q7021.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A
B
C
D
1 2 3 4
A
B
C
D
TITLE
Tank Replacement Drawing
SIZE
B
SCALE
DWG NO REV
SHEET 1 OF 9
82522
CAGE CODE
DRAWN
CHECKED
DESIGNED
BRANCH SU
APPROVAL
DEPARTMENT OF THE NAVY PUGET SOUND NAVAL SHIPYARD
PRODUCTION ENGINEERING AND FACILITIES DIVISION, CODE 900F
BREMERTON, WASHINGTON
CONCURRENCE GENERAL TOLERANCES
UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE IN INCHES,
FABRICATION TOLERANCES ARE AS FOLLOWS:
LINEAR DIMENSIONS: X.X ± 0.1, X.XX ± 0.01, X.XXX ± 0.005
ANGULAR DIMENSIONS: X ± 1°, X.X ± 0.5°
CODE / SIGNATURE
DATE
RT-250901
THIRD ANGLE PROJECTION
GENERAL NOTES
1. THIS DRAWING PROVIDES GENERAL INFORMATION ON TANKS FOR MANUFACTURING.
2. ALL FITTINGS, ANGLES, SQUARE TUBES AND ACCESSORIES OF THE TANKS ARE TO BE
OF THE SAME MATERIAL AS THE TANK.
3. ALL WELDS ARE TO BE CONTINUOUS, GRIND INSIDE.
4. OUTLETS ON TANKS ARE TO BE FLANGED AND LINED.
5. EXTERNAL SURFACES OF THE TANKS ARE TO BE SAND BLASTED AND, PRIMED AND
COATED WITH LIGHT GRAY, ROOM TEMP CURE, EPOXY COATING, THAT IS CHEMICALLY
RESISTANT TO THE TANK CONTENTS. SUGGESTED TriFLEX OR EQUIVALENT.
6. COUNTER CURRENT BARRIERS IN RINSE TANKS MAY BE FABRICATED FROM 1/4" PVC.
ENSURE ENOUGH SUPPORT EXISTS BETWEEN THE BARRIERS TO WITHSTAND ONE SIDE
BEING EMPTY WHILE FILLING THE OTHER DURING INITIAL FILLING.
7. UNLESS OTHERWISE INDICATED ALL INLET AND OUTLET PIPES SHALL BE SCHEDULE 80.
8. TANK SIDE AND BOTTOM THICKNESS ARE SHOWN IN THE TANK LIST TABLE
ON SHEET 2.
8/27/25
NONE
71% Sulfuric Acid3/16" PVC10 Guage 304 Stainless Steel2' x 1' x 1'4"D Lined TankTank J71
620% Nickel Chloride 6% HCl3/16" PVC1/4" 304 Stainless Steel4' x 3' x 5'D Lined TankTank H2B1
55% Boric Acid 2.5% Nickel Chloride3/16" PVC1/4" 304 Stainless Steel8' x 3' x 5'D Lined TankTank H81
41% Sulfuric Acid3/16" PVC1/4" 304 Stainless Steel8' x 3' x 5'D Lined TankTank H51
31% HCl3/16" PVC1/4" 304 Stainless Steel6' x 3' x 3'D Lined TankTank F21
216% HCl3/16" PVC1/4" 304 Stainless Steel3' x 3' x 3'D Lined TankTank F1A1
116% HCl3/16" PVC1/4" 304 Stainless Steel3' x 3' x 3'D Lined TankTank F11
A
B
C
D
1 2 3 4
A
B
C
D
SIZE
B
SCALE
DWG NO REV
SHEET 2 OF 9
82522
CAGE CODE
RT-250901
TANK LIST
DESCRIPTIONTANK NUMBERQTY
FIND
NO.
MATERIAL LINER TANK CONTENTS
NONE
DETAIL A
TYPICAL
SCALE 1 / 4
SECTION B-B
TYPICAL
SCALE 1 / 4
A
B B
A
B
C
D
1 2 3 4
A
B
C
D
SIZE
B
SCALE
DWG NO REV
SHEET 3 OF 9
1/12
82522
CAGE CODE
RT-250901
42.5
42.5
36.0
36.0
36.0
Tank F1 3' x 3' x 3'D Lined Tank1
3.0
.75
1.3
.63
18.0
16.8
L 3"x3"x1/4"
L 3"x3"x1/4"
.13
A
B
C
D
1 2 3 4
A
B
C
D
SIZE
B
SCALE
DWG NO REV
SHEET 4 OF 9
1/12
82522
CAGE CODE
RT-250901
SEE DETAIL A
SHEET 3
18.0
36.0
42.5
36.0
42.5
36.0
Tank F1A 3' x 3' x 3'D Lined Tank2
16.8
L 3"x3"x1/4"
SECTION N-N
SCALE 1/4
N N
A
B
C
D
1 2 3 4
A
B
C
D
SIZE
B
SCALE
DWG NO REV
SHEET 9 OF 9
1/6
82522
CAGE CODE
RT-250901
16.0
16.3
28.3
12.0
24.0
4.6
SEE DETAIL A
SHEET 3
SEE DETAIL D
SHEET 5
Tank J7 2' x 1' x 1'4"D Lined Tank7
L 2"x2"x1/4"
4.0
4.0
3.5
2.0
2.0
File details come from the government source that posted it. Updated .