5 Axis Mill Turn Specifications.docx
DOCX document 606 KB Posted
- Attached to
- 5 Axis Mill/Turn
- Solicitation number
- PR332184
- Issued by
-
Department of Energy
About this file
This technical specification document outlines requirements for a 5-axis mill/turn machine for Oak Ridge National Laboratory. The specifications detail minimum required work area travels of 750mm for X-axis, 100mm for Y-axis, 1,100mm for Z-axis, 120° for B-axis, and 1,200mm for counter spindle, all with scale feedback resolution of 0.0001mm (except B-axis at 0.001).
The machine must fit within maximum footprint dimensions of 5,850mm length, 2,400mm width, and 2,850mm height. The document appears incomplete as it cuts off during the Machine Accuracy section, only partially listing positioning and repeat accuracy requirements for the X-axis. According to the pre-solicitation notice, these specifications represent minimum requirements that suppliers must meet to be considered, with any Additional Features requiring either exact compliance or functional equivalents.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
5 Axis Mill/Turn Specifications Work Area
| Travel |
| Scale Feedback |
| Resolution |
| X-Axis |
| 750 mm Min |
| Yes |
| 0.0001mm |
| Y-Axis |
| ±100 mm Min |
| Yes |
| 0.0001mm |
| Z-Axis |
| 1,100 mm Min |
| Yes |
| 0.0001mm |
| B-Axis |
| ±120° Min |
| N/A |
| 0.001° |
| Counter Spindle |
| 1200 mm Min |
Machine Footprint
| Length |
| 5,850 mm Max |
| Width |
| 2,400 mm Max |
| Height |
| 2,850 mm Max |
Machine Accuracy
| Positioning Accuracy |
| Repeat Accuracy |
| X-axis |
| <0.006mm |
| <0.002mm |
| Y-axis |
| <0.006mm |
| <0.002mm |
| Z-axis |
| <0.01 mm |
| <0.003mm |
| C-axis |
| <0.0042° |
| <0.014° |
Additional Features Upgrades
· Grinding capability with acoustic sensors on Main & Counter Spindle
· 3D Quick Set Tool Setup
· Multitool, Application tuning cycles, alternating speed, retraction cycle
· Runtime Monitor, Machine Protection Control, Tool Monitoring
· 5-axis simultaneous machining, Multi-threading 2.0, Polygon/ Oval Turning, Grinding, Interpolation turning, excentric machining, y-axis parting, keyway broaching
· Training for 3 People (if machine specific training available)
· NTRL Inspection/Certification Required
· Cutting Tool & Holder Voucher image1.jpg
File details come from the government source that posted it. Updated .