Solicitation_Amendment_02.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

2PQAC

Belkys Torres Rivera

1- See attached Description

2PQAC

CARIBBEAN ACQUISITION UNIT GSA, PUBLIC BUILDINGS

SERVICE 150 CARLOS E. CHARDON AVENUE, ROOM 359

HATO REY, PR 00918

CARIBBEAN ACQUISITION UNIT GSA, PUBLIC BUILDINGS

SERVICE 150 CARLOS E. CHARDON AVENUE, ROOM 359

HATO REY, PR 00918

47PC0619R0006

1 12

05/16/2019

05/07/2019

The purpose of this amendment is to:

1. Incorporate the answers to RFI questions 1 through 10. See document attached.

2. Eliminate the “Deduct Alternate No. 1” from Drawing Sheet A-000, Drawing Sheet A-004 and from Specifications Section 012300-1.3.1.A entitled “Schedule of Alternates”. Consequently, the following reference under Section 9 of the GSA-Hato Rey Link Extension_100% Supporting docs is hereby deleted: “Under Deduct Alternate #1, the Link would be closed during construction of the Link Extension”. Accordingly, the Pricing Table under Section II.B of the Agreement is revised to eliminate this “Deduct Alternate No. 1” and this pricing table is renamed as “Pricing Table A”. Based on these changes a revised Agreement is hereby attached.

3. Eliminate the requirement of an “Off-site Climate Control Storage” from Specifications Section 015000-1.3.J entitled “Submittals”.

4. Eliminate the requirement “Climate Controlled” from Specifications Section 011000-1.2.B entitled “Work Sequence”.

5. Incorporate Sketch BSK-CJ-100 for signs location and trailer location, attached.

6. Incorporate Cut Sheets of existing Government Furnished Property to be re-installed by contractor as required under Section 011000-1.3.A. See attached Cut Sheets.

7. Incorporate under Section II.B of the Agreement a second pricing table entitled “Table B – Unit Pricing Breakdown”. Accordingly, a revised Agreement is hereby attached.

RFI

No. QUESTION GSA RESPONSE

Refer to sheet A-000 (Deduct Alternate No. 1) and Spec Section 012300-3.1.A. Please explain the government’s intent with Deductive Alternate No. 1.

We cannot find a detailed description of what will be the reduced scope of work for providing a different “work sequence” for the project in which the Link Building Functions are not maintained. Please clarify.

All reference to Deduct Alternate No. 1 is to be deleted. No action is required of the general contractor.

Refer to Spec Section 011000-1.2.B-Work Sequence.

In the description of Phase 1 it states that the Contractor shall arrange for a secure, climate controlled storage that meets all temp and humidity control requirements per section 015000. Please provide a list of the Government items that need to be stored and secured by the Contractor.

List of items include (but not limited to) all items identified in the spec as “remove,keep secure, & reinstall…” Please review page 7, ‘key noted’ from the Drawing set for reference.

List of items to be stored:

Existing light pole Existing round concrete seats Existing concrete sign Existing spotlights Existing garbage cans Bushes (pls see L100 drawing, PLANT & TREES

RELOCATION PLAN)

Refer to Spec Section 015000-1.3.J. Please clarify the total duration that the Contractor shall provide the Government with a climate controlled storage facility

No climate controlled storage facility will be required.

Equipment will be stored on campus, in a location coordinated by Building Management.

Refer to Spec Section 015000-3.3.K.1. Please advise how many Project Identification Signs must be included and where they should be mounted

Please provide two (2) Project Identification Signs at the locations indicated on the attached sketch BSK-

CJ-100

Refer to Spec Section 011000-1.3.A-Schedule of Government Furnished Property. Please advise if all the equipment listed in this section is new equipment and if this equipment will be delivered and unloaded at the jobsite by the Government for Contractor installation.

The government furnished equipment is not new equipment. Existing equipment is on-site (current in the Link Building) and will be installed in the new Link extension. Cut sheet of equipment will be provided.

1. Two walk-through magnetometers

2. One X-ray machine

3. Weapons lockers

4. One clear barrel

Refer to Spec Section 011000-1.3.A-Schedule of Government Furnished Property. In order to understand the extent of work required for installation of this Government furnished equipment, please provide material cut sheets of the equipment that will be installed by Contractor.

Please see attached cut sheets for the existing equipment listed in the Schedule of Government- Furnished Property to be re-installed by contractor.

Refer to Spec Section 012700. Please advise what these unit prices will be used for and if we need to include prices for these items in our proposal.

The Unit Prices allow for expeditious scope adjustments to the contract for construction, as may be required by unforeseen field conditions and/or unanticipated project scope adjustments. Please include prices for them in your proposal. Table B entitled "Unit Pricing Breakdown" is added in the agreement in section II.B Contract Price Form for that purpose.

Refer to Spec Section 280000 and sheet FA101– Please advise if the installation, programming, certification, and testing of new and existing fire alarm devices of the Link Building are part of the scope of this contract and if the Contractor shall hire the GSA vendor that provides this service to the facility for execution of this work

Yes, the installation, programming, certification, and testing of new and existing fire alarm devices of the Link Building are part of the scope of this contract and the Contractor shall hire the GSA vendor that provides this service to the facility for execution of this work.

Please advise if parking for Contractor workers will be available on site.

No parking will be available on site during working hours for building occupants. The Contractor and Contractor's employees shall make their own arrangements for vehicle parking off site. (Please reference page 14 of Vol I document).

Please indicate what location within the campus facility will be provided to the Contractor for setup of office trailer, storage trailer, and material lay-down area.

Please review sketch BSK-CJ-100 enclosed with the location marked in the drawing. The contractor shall not block pedestrian entrance and access to the existing link in that area.

PROPOSED

BUILDING

EXISTING GREEN AREA

EXISTING

LINK BUILDING

CLEMENTE

RUIZ NAZARIO

U.S. COURTHOUSE

C

A

R

L

O

S

F

C

H

A

R

D

O

N

A

V

E

N

U

E

FEDERICO DEGETAU

FEDERAL BUILDING

EXISTING

GREEN AREA

EXISTING

GREEN AREA

PROPOSED

BUILDING

EXISTING

LINK BUILDING

N

GENERAL SERVICES ADMINISTRATION

ONE WORLD TRADE CENTER

55TH FLOOR

NEW YORK, NY 10007-0089

WWW.GSA.GOV

Architect

1385 Broadway, 15th Floor, New York, NY 10018

212/247/2660 phone212/247/7132 fax

MEP/Structural Engineers

1010 Kings Highway South, Building Two, Cherry HIll, NJ 08034

856/429/4000 phone856/429/5002 fax

Miller - Remick, LLC

Civil Engineers

787/268/0550 phone787/268/1410 fax ebp Design Group Consulting Engineers

C E R T I F I C A T I O N S

K E Y

P L A N

R E V I S I O N S

MARK DATE DESCRIPTION

G R A P H I C

S C A L E

C O N T R A C T O R S

A/E CON. NO.

A/E TASK NO.

CONS. CONTR.

CONS. WORK

PRIME A/E

SUB A/E

CONSTR. CON.

GS-02P-15-DTD-7001

GS-P-02-17-P1-0004

DATTNER ARCHITECTS

B U I L D I N G

NAME

STREET

CITY/ST./ZIP

BUILDING NO.

OTHER

BUILDING NOs.

FACILITY CODE

Federico Degetau Federal Building &

Clemente Ruiz Nazario U.S. Courthouse

150 Carlos Chardon Avenue

Hato Rey, Puerto Rico 00918

P R O J E C T

PROJECT

TITLE

Link Extension Project

PROJECT

DESCRIPTION

PROJECT NO.

GSA PM Noemi Hall

SUBMISSION 100% (Final) Construction Documents

SUB. DATE 03/18/2019

D R A W I N G

DRAWING TITLE

FILE NAME

FLOOR NO.

DRAWN BY

CHECKED BY

SHEET

DRAWING NO.

DISCIPLINE SHEET TYPE SEQUENCE

SHEET OF

Calle Carlos F. Chardon

CHK

DWN

DATE DRAFTED:

PROPERTY OF THE UNITED STATES GOVERNMENT - FOR OFFICIAL USE ONLY. Do not remove this notice. Properly destroy documents when no longer needed.

207 Del Parque Street, 4th Floor, San Juan, PR 00912

Blast Consultant

748 Lord Dunmore Drive, Suite 101, Virginia Beach, VA 23464

757/474/0612 phone

NRW Engineering, P.C.

03/18/2019

CJ 1 00

18-GSA-CJ100_REV APRIL 17,2019.DWG

N

0 15

SCALE = 1 : 250 M

51 2 3 4

EROSION & SEDIMENT

CONTROL PLAN

FOR NOTES & LEGEND, REFER TO DWG. CJ101.

Project Identification Sign mount to outside surface of construction fence

Project Identification Sign mount to outside surface of construction fence

RFI #01

ATTACHED BY REVIEWER

5/16/2019

BSK CJ 1 00

Office Trailer, Storage Trailer, and Material Lay-down Area

METOR 6M

THE METOR 6M IS A VERSATILE MULTI-PURPOSE MULTI-ZONE WALK-THROUGH

METAL DETECTOR USED FOR VARIOUS THREAT ITEMS AND CONTRABAND

DETECTION.

Typical applications include passenger screening at airports and seaports, visitor screening at courthouses, federal buildings and prisons, access control in conferences, public buildings, sporting or other special events, stadiums and concerts, employee and visitor screening in power plants or factories as well as screening in hotels, restaurants, casinos, and night clubs.

ENHANCED

SECURITY

FEATURES AT

CHECKPOINTS

AND ACCESS

CONTROLLED

ENTRIES.

VERSATILE APPLICATIONS

SUPERIOR IMMUNITY

ADVANCED FEATURES FOR

ENHANCED SECURITY

AUTOMATED FEATURES FOR

EASIER USABILITY

IP55 PROTECTION FOR

SHELTERED OUTDOOR USE

MARKETS

- Critical Infrastructure

- Customs and Border Control

- Defense

- Law Enforcement

- Airports

- Courts

- Hospitals

- School Security

INDEPENDENT ZONES PROVIDE FOR:

Superior discrimination

Reliable detection of threat items

High traffic throughput

Reliable location of threats

RADIATION DETECTION

Metor 6M can be integrated with radiation detection capability to combine multi threat detection of both metal and radioactive mate-rials. The configuration enables either gamma or gamma/neutron detection options and is available as a field upgradeable kit.

ENHANCED SECURITY

The latest features for advanced security are available on the Metor 6M. Calibration guard, power guard and ready-state violation all protect against unwanted tampering to the unit. Fully configurable user levels allow for unprecedented control over who can view and change settings on the Metor 6M.

ENHANCED FEATURES FOR EASIER USABILITY

Automated sensitivity and floor sensitivity functions make the calibration process easy, eliminating the time consuming trial and error method.

Automated frequency function selects the optimum operating fre-quency for the installation environment or in case of side-by-side use of more than one unit.

Preset Detection Programs – The Metor 6M is delivered with mul-tiple preset detection programs based on international standards, ready to use immediately.

RANDOM ALARM FUNCTION

The Metor 6M has a random alarm function that enables security personnel to randomly choose individuals for an additional secu-rity check. With the new dual random alarm feature, people who cause a normal alarm are also subject to a random alarm.

INTELLIGENT TRAFFIC COUNTERS FOR RELIABLE

STATISTICS

Metor 6M is built with intelligent and virtually invisible traffic counters which are integrated inside the coil panels. Counters are bi-directional with a decrease mode. Alarms, passengers and alarm rates can all be counted.

ZONE DISPLAY

Accurate 20 segment zone display locates the alarmed item(s) on a person quickly making the screening process effective and improving the throughput

EASY TO INSTALL AND OPERATE

With its immunity to electromagnetic interference and vibration, the Metor 6M is easy to install in the most demanding environments.

Several units can be placed in close proximity to one another, increasing the level of flexibility when planning an installation site.

sales@rapiscansystems.com www.rapiscansystems.com

EUEU

AVIATION

COMPLIANT

AVIATION

COMPLIANT

AMERICAS, CARIBBEAN

2805 Columbia Street Torrance, California 90503 UNITED STATES of AMERICA

Tel: +1 310-978-1457 Fax: +1 310-349-2491

EUROPE, MIDDLE EAST, AFRICA

X-Ray House Bonehurst Road Salfords Surrey RH1 5GG

UNITED KINGDOM

Tel: +44 (0) 870-7774301 Fax: +44 (0) 870-7774302

ASIA

240 Macpherson Road #07-01 Pines Industrial Building Singapore 348574

SINGAPORE

Tel: +65-6846-3511 Fax: +65-6743-9915

CONFORMITY

Safety Standards Metor 6M has been tested against and complies with applicable magnetic field standards concerning human exposure and pacemaker safety.

Safety Act Rapiscan Systems products have been certified by the U.S. Department of Homeland Security for Support Anti-Terrorism by Fostering Effective Technologies (SAFETY) Act of 2002, which provides important benefits to organizations that deploy security technology. For additional information visit HYPERLINK “http://www.safetyact.gov” www.safetyact.gov.

Compliant Conforms to the applicable international standards for electrical safety and EMC.

Other Standards EU Aviation Compliant

SPECIFICATIONS

Ambient Operating Temperature From -20° C to + 60° C (From -4° F to +140° F)

Humidity 0 to 95%, no condensation

Protection IP 55 (IEC 60529)

Power Supply Mains: 90-264 VAC/50-60Hz Battery (optional) : 12 VDC Consumption, typical: 30 W (AC), 25 W (DC)

Alarm Audible/visible alarm.

Alphanumeric display and Zone Display. Relay contact for remote alarm (SPDT)

Sensitivity 100 sensitivity steps in each program. Separate vertical zones with independently adjustable sensitivity from 0-200%.

Calibration Automatic or manually set.

Interference Suppression Digital filtering by signal processor. Several operating frequencies to suppress local electrical noise.

Network Connections MetorNet Remote Security Monitoring System compatible (Ethernet)

Dimensions Interior: 76 cm (30 in.) Width x 205 cm (81 in.) Height Exterior: 90 cm (35 in.) Width x 224 cm (88 in.) Height x 70 cm (28 in.) Depth

Weight 63 kg (139 lbs.)

Shipping Weight & Volume Total: shipping weight: 88 kg (194 lbs) shipping volume: .45 m3 (15.9 cu ft) Coils: shipping weight: 70 kg (154 lbs) shipping volume: .35 m3 (12.4 cu ft) Crosspiece + electronics:

shipping weight: 18 kg (40 lbs) shipping volume: .10 m3 (3.5 cu ft)

Rapiscan Systems is ISO 9001:2008 Certified sales@rapiscansystems.com www.rapiscansystems.com

OPTIONS AND ACCESSORIES

- Battery Backup: Up to 8 hours of runtime when no power is available.

- Remote Control Unit: A bi-directional remote control unit enables easy programming as well as copying of the parameters from one unit to other units. This control unit, unique only to the Metor brand of walk-through metal detectors, makes programming several detectors fast and easy. The operation of the control unit is secured with passwords and a code-hopping encryption algorithm to prevent unauthorized access.

- ADA Compliant Crosspiece: ADA compliance extension available for retrofitting the unit.Test Pieces: To assist in calibration and testing.

- MetorNet 3 Pro Web: A Remote Security Management System that collects the statistics on traffic flow and alarm data of Metor walk-through metal detectors and generates easy-to-read reports.

- Traffic Lights: to assist in the smooth flow of people through the unit.

- Additional zone displays: can be added to each corner of both panels to enhance visibility, manage the traffic flow and for flexible installation

- Remote Display Set: for convenient remote monitoring and operation of the unit

- Dolly: for easy relocation of the unit

- Wheels for easy mobility.

- Radiation detection kit for gamma or gamma/neutron detection capability

With continual development of our products Rapiscan Systems reserves the right to amend specifications without notice. Product pictures are for general reference. Please note that due to US laws and regulations, not all Rapiscan products are available for sale in all countries without restriction. Please contact your Rapiscan Systems sales representative for more information.

METOR 6M

FRM –MA-020-1 121015

90 cm (35 in.)

76 cm (30 in.)

c m (8 in c m (8 in

70 cm (28 in.)

An OSI Systems Company

Features & OptiOns

New OS600 Operating System

Dependable Platform

Seamless Network Integration

Value and Performance baggage and parcel inspection

Rapiscan 620XR

ONE COMPANY - TOTAL SECURITY

threat image projection (tip):

TIP inserts digital threat images at configurable frequencies into the regular flow of bags. TIP is a reliable method for continually improving the skill level of screeners and is the preferred training method used by regulatory agencies worldwide.

High penetration (Hp): This option provides 35mm steel penetration using a 180KV generator.

Rapiscan Systems’ new OS600 Operating System provides an intuitive Graphical User Interface with improved image quality. OS600 also offers advanced networking capabilities.

The rapiscan 620Xr is the solution for high performance threat detection at the lowest cost of ownership. With an emphasis on ergonomic design features like the adjustable control panel stand, the 620XR addresses screeners’ ease-of-use requirements.

The rapiscan 620Xr’s modular assembly and swing-open easy-access panels provide unmatched reliability and serviceablilty.

The dual energy rapiscan 620Xr provides automatic color coding of materials with different atomic numbers so that screeners can easily identify objects within the parcel.

The rapiscan 620Xr has a large tunnel opening of 620mm (24.4 inches) wide by 420mm (16.4 inches) high. The center drive roller design allows for bi-directional operation. In addition, the system is equipped with folding conveyors to permit relocation and access through doorways and elevators. Also, the control panel can lock in a vertical position for secure storage.

customer support services Our team is dedicated to providing a prompt, effective and personalized response that exceeds your expectations. With spare parts inventory and skilled technicians all over the world, you can be certain Rapiscan Systems will always be prepared with a solution to address your requirements. By measuring response time, parts delivery and support status, our team embraces a customer centric philosophy to ensure continual improvement of our products and services.

Shown with optional control panel stand baggage and parcel inspection

Rapiscan 620XR www.rapiscansystems.com

PHYSICAL SPECIFICATIONS

Dimensions: Length: 2,570 mm (101 in.) Unit in use Length: 1,480 mm (58.27 in.) Conveyors folded up Height: 1,381 mm (54 in.)

Width: 840 mm (33 in.)

Tunnel Size: 620 mm (W) x 420 mm (H) (24.4 x 16.4 in.)

Conveyor Speed: 0.22 m/sec (44 ft./min) Max Load: 165 Kg (365 lbs) Approx Weight: Net: 680 Kg (1,499 lbs) System Power: 115 VAC +/- 10% / 50Hz or 60Hz / 10 Amps max or 230 VAC +/- 10% / 50Hz or 60Hz / 5 Amps max

X-RAY GENERATOR AND IMAGE PERFORMANCE

Wire Resolution: 38 AWG guaranteed, 40 AWG typical Steel Penetration: 27 mm guaranteed, 29 mm typical Material Separation: Low Z, Medium Z, High Z to 0.5 Z accuracy Generator Cooling: Sealed oil bath with forced air Anode Voltage: 160KV rated, operating at 140KV Tube Current: 0.7 mA Orientation: Vertically Upward

HIGH PENETRATION OPTION (HP)

Steel Penetration: 35 mm guaranteed Wire Resolution: 38 AWG guaranteed, 40 AWG typical Anode Voltage: 180KV rated, operating at 160KV Tube Current: 1mA typical

COMPUTER SPECIFICATIONS

Processor Speed: Intel Pentium® Processor currently available Monitor: 17” CRT color, non-flicker Memory: 1 GB RAM minimum Video Memory: 256 MB minimum Hard Disk Drive: 160 GB minimum DVD-ROM Drive: 16X Access to keyboard port and parallel port is provided by means of a lockable access panel on the outside of the machine.

OPERATING ENVIRONMENT

Storage Temperature: -20°C to 50°C Operating Temperature: 0°C to 40°C Relative Humidity: 5 to 95% non-condensing

-1 www.rapiscansystems.com

STANDARD FEATURES OPTIONS

Crystal Clear™ Threat Image Projection (TIP)

Multi Energy Imaging (4 color) Flat Panel LCD Monitor

Variable Edge Enhancement Adjustable Height Lift and Tilt Stand

High Penetration Power Conditioner

Variable Gamma Remote Workstation

Inverse Video Foot-mat

Variable Density Zoom UPS (Uninterrupted Power Supply)

Organic/Inorganic Stripping High Penetration X-ray Generator

Black and White Viewing

Variable Color Stripping

Zoom (to 64x)

View Previous Bag

Programmable Function Keys

Manual Image Archiving

Automatic Image Archiving

Baggage Counter

Search Indicator

Date/Time Display

840mm [33”] m m

[5 4”

0.

m m [3

1.

5”

2570mm [101”]

1204mm [47.4”]

620mm [24.4”]

0m m [1

6.

4”

840mm [33”] m m

[5 4”

0.

m m [3

1.

5”

2570mm [101”]

1204mm [47.4”]

620mm [24.4”]

0m m [1

6.

4” united states of america 3232 W. El Segundo Blvd.

Hawthorne, California 90250 UNITED STATES of AMERICA Tel: +1 310-978-1457 Fax: +1 310-349-2491 e-mail sales@rapiscansystems.com united Kingdom X-Ray House Bonehurst Road Salfords Surrey RH1 5GG

UNITED KINGDOM

Tel: +44 (0) 870-7774301 Fax: +44 (0) 870-7774302 asia pacific 240 Macpherson Road #06-04 Pines Industrial Building Singapore 348574

SINGAPORE

Tel: +65-6743-9892 Fax: +65-6743-9885 / 6743-9915 distributor stamp

032206

HEALTH & SAFETY

All Rapiscan Systems products comply with applicable international health and safety regulations including USA FDA X-ray systems (Federal Standard 21CFR 1020.40) and Health and Safety at Work Act 1974-section 6, Amended by the Consumer Protection Act 1987. Maximum leakage radiation less than 0.1mR/hr (1µ Sv/hr) in contact with outer panels.

Film Safety: For ISO 1600/33 DIN, guaranteed up to 10 times exposure to radiation.

CE Compliance: Yes FCC & IEC Compliance: Yes iso 9001:2000 certified With continual development of our products Rapiscan Systems reserves the right to amend specifications without notice.

sidearm lockers

Built to meet the rigorous demands of our public safety professionals. A rugged, durable solution for your secured firearms storage needs.

for use in public safety facilities including police stations, sheriffs’ offices, courthouses and federal buildings surface or recess mounted powder coat finish felt-lined bottom continuous hinges digital lock options available

HEAVY GAUGE LOCKERS

door and face 7-Gauge, body 14-gauge fold down door

LIGHT GAUGE LOCKERS

door, face and body 16-gauge side-hinged door

Manufacturing Quality Metal Products Since 1903 sidearm locker configurations

WSL29081504KNAA

29”Wx8”Dx15”H

4 Doors, Keyed Lock

WSL29082206KNAA

29”Wx8”Dx22”H

6 Doors, Keyed Lock

WSL14062804KNAA

14”Wx6”Dx28”H

4 Doors, Keyed Lock

WSL15082203KNAA

15”Wx8”Dx22”H

3 Doors, Keyed Lock

WSL29083008KNAA

29”Wx8”Dx30”H

8 Doors, Keyed Lock

WLK24060602KNAB

24”Wx6”Dx6”H

2 Doors, Keyed Lock

WLK24061204KNAB

24”Wx6”Dx12”H

4 Doors, Keyed Lock

WLK24061806KNAA

24”Wx6”Dx18”H

6 Doors, Keyed Lock

WPL14062804KNAA

14”Wx6”Dx28”H

4 Doors, Keyed Lock

WPL14141404KNAA

14”Wx14”Dx14”H

4 Doors, Keyed Lock

LIGHT GAUGE LOCKERS

WSL29083710KNAA

29”Wx8”Dx37”H

10 Doors, Keyed Lock

ELK34127413KNAB

34”Wx12”Dx78”H

8 Doors, Keyed Lock 5 Doors, Long Gun Storage

HEAVY GAUGE LOCKERS

EXISTING QUANTITY = (2)

EXISTING QUANTITY = (2)