4.02 - N0018924Q0017 SAP Combined Synopsis Solicitation.pdf

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures under the test program for commercial items found at FAR Part 13, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE

AVAILABLE. This combined synopsis/solicitation SHALL be posted on Sam.gov

(https://sam.gov/).

The RFQ number is N0018924Q0017. This solicitation documents and incorporates provisions and clauses in effect through FAC 2023-04 (effective 02 June 2023) and DFARS Publication

Notice 20230609 (effective 09 June 2023). It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/far/ and http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html.

The NAICS code is 513120 and the Other than Small Business Standard is 1,000 (number of employees). The proposed contract action is for a firm fixed price purchase order for an annual journal subscription. Additional journal subscription details are included in the below PWS. The

Government intends to solicit and negotiate with only one source, The American Society of

Mechanical Engineering (ASME), as no other capable sources have been identified. The Small

Business Office with this determination.

This announcement will close at 11:00 AM EST on Tuesday, November 14, 2023. All responsible sources may submit a quote to Porchia Locke, who can be reached via porchia.y.locke.civ@us.navy.mil, NO LATER THAN 11:00 AM EST on Tuesday, November 14, 2023. All questions to this announcement will be closed at 11:00 AM EST on Wednesday, November 8, 2023. A determination by the Government to not compete this proposed effort on a full and open competitive basis, based upon responses to this notice is solely within the discretion of the Government. Oral communications are not acceptable in response to this notice. All responsible sources may submit a quote which shall be considered by the agency.

Please see PWS below:

Performance Work Statement

NIMITZ LIBRARY SUBSCRIPTION REQUIREMENTS

Background

The Nimitz Library at the U.S. Naval Academy is an academic library in support a patron population of approximately 4,520 midshipmen, 600 faculty, and 3,000 other staff and military personnel. To meet the academic/educational mission requirements of the Naval Academy, the Nimitz Library purchases scholarly content in the form of scholarly journals and databases. This content is an integral part of the Library’s collections and services as curriculum and course development as well as midshipman and faculty research are dependent upon them.

file://///NAEANRFKFS101V.NADSUSEA.NADS.NAVY.MIL/NAVSUP2$/NRFK/C200/E-files/220.1%20(Antonio's%20Team)/CCE/FY22/N6315122RC00HBQ,%20Security%20Guard/Working/(https:/sam.gov/ https://www.acquisition.gov/far/ http://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

Scope

In order to sustain Library performance, support and advance the educational mission of the

Academy, and provide the necessary resources to sustain faculty research agendas, the Nimitz

Library shall own key scholarly materials in the humanities, sciences, engineering, and professions. These resources shall provide the uniquely curated intellectual property necessary for the Academy’s specific educational and research needs.

Requirements

-Full-text access to ASME Package #2

-Articles shall be index able by the Library’s Ex Libris system.

-Publisher POC shall respond within one business day to all technical and content questions and problems posed by the Library’s POC.

-The content provider shall be able to be signatory on bi-lateral license and terms & conditions agreements.

Deliverables

-Yearly Subscription to ASME Package #2, which provides access to all of the below in section C, for a base year contract with 4 optional additional years.

-Package #2 shall include:

publication_title online_identifier date_firs t_issue_ online title_id coverage_notes

Applied Mechanics Reviews 0003-6900 1985-10 AMREAD Backfile volumes 38-53 (years 1985- 2000) were released January 2010

Journal of Applied Mechanics 0021-8936 1960-01 JAMCAV Backfile volumes 38-53 (years 1980- 1989) were released January 2010

Journal of Biomechanical Engineering 0148-0731 1977-02 JBENDY Backfile volumes 102-111 (years 1980-1989) were released January

Journal of Computing and Information Science in Engineering

1530-9827 2001-03 JCISB6

Journal of Computational and Nonlinear Dynamics 1555-1415 2006-01 JCNDDM

Journal of Dynamic Systems, Measurement, and Control

1528-9028 1971-01 JDSMAA Backfile volumes 102-111 (years 1980-1989) were released January

Journal of Engineering Materials and Technology 0094-4289 1973-01 JEMTA8 Backfile volume 102-111 (years 1980- 1989) were released January 2010

Journal of Electronic Packaging 1528-9044 1989-03 JEPAE4 Backfile volume 111-(year 1989) was released January 2010

Journal of Energy Resources Technology 0195-0738 1979-01 JERTD2 Backfile volumes 102-111 (years 1980-1989) were released January

Journal of Engineering for Gas Turbines and Power 1528-8919 1960-01 JETPEZ Backfile volumes 106-111 (years 1984-1989) were released January Formally JEPOA8

Journal of Electrochemical Energy Conversion and Storage….Formerly the Journal of Fuel Cell Science and Technology

2381-6872 formerly 1550-624X

2004-11 -new title

JEECAJ Formally JFCSAU

Journal of Fluids Engineering 0098-2202 1960-01 JFEGA4 Backfile volume 102-111 (years 1980- 1989) were released January 2010

Journal of Heat Transfer 0022-1481 1960-01 JHTRAO Backfile volume 102-111 (years 1980- 1989) were released January 2010

Journal of Mechanical Design 1050-0472 1978-01 JMDEEC Backfile volume 102-104 (years 1980- 1982) were released January 2010

Journal of Medical Devices 1932-6181 2007-03 JMDOA4

Journal of Offshore Mechanics and Arctic Engineering 0892-7219 1987-01 JMOEEX Backfile volume 102-111 (years 1980- 1989) were released January 2010

Journal of Mechanisms and Robotics 1942-4302 2009-02 JMROA6 Launched online August 1, 2008

Journal of Manufacturing Science and Engineering 1087-1357 1960-01 JMSEFK Formally JEFIA8

Journal of Tribology 0742-4787 1967-01 JOTRE9 Backfile volume 106-111 (years 1984- 1989) were released January 2010 Formaly JLUTAT

Journal of Turbomachinery 0889-504X 1986-07 JOTUEI Backfile volume 108-111 (years 1986- 1989) were released January 2010

Journal of Pressure Vessel Technology 0094-9930 1974-01 JPVTAS Backfile volume 102-111 (years 1980- 1989) were released January 2010

Journal of Solar Energy Engineering 1528-8986 1980-02 JSEEDO Backfile volume 102-111 (years 1980- 1989) were released January 2010

Journal of Thermal Science and Engineering Applications

1948-5085 2009-03 JTSEBV

Journal of Vibration and Acoustics 1048-9002 1983-01 JVACEK Formally JVADDM

Journal of Micro and Nano-Manufacturing 2166-0468 2013-03 AJMNBT

ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering

2332-9025 2015-03 AJRUB7

Journal of Nuclear Engineering and Radiation Science 2332-8963 2015-01 AJNEB7

Journal of Verification, Validation and Uncertainty Quantification

2377-2158 2016-01 JVVUA5

Journal of Engineering and Science in Medical Diagnostics and Therapy

2572-7958 2018-01 AJESHA

a. Free USNA author Article Publishing Charges (APCs) in ACM journals.

E. Period of Performance

i. 1/1/2024-12/31/2024

ii. 1/1/2025-12/31/2025

iii. 1/1/2026-12/31/2026

iv. 1/1/2027-12/31/2027

v. 1/1/2028-12/31/2028

FOB: Destination Terms: NET 30

Period CLIN Dates Description

Quantity

Unit of Issue Pric e

Base

0001 1 JAN 2024 – 31 DEC 2024

To procure the American

Society Mechanical

Engineering Package #2, to support the training by

USNA Faculty and the

Brigade of Midshipmen of the USNA, for mission attainment IAW the Performance Work

Statement (PWS).

EA

Option I 1001 1 JAN 2025 – 31 DEC 2025 ASME Package #2 1 EA $

Option II 2001 1 JAN 2026 – 31 DEC 2026 ASME Package #2 1 EA $

Option III 3001 1 JAN 2027 – 31 DEC 2027 ASME Package #2 1 EA $

Option IV 4001 1 JAN 2028 – 31 DEC 2028 ASME Package #2 1 EA $

The following FAR provision and clauses are applicable to this procurement:

52.212-1 ADDENDUM

ADDENDUM TO 52.212-1 - INSTRUCTIONS TO OFFERORS

In addition to FAR 52.212-1, “Instructions to Offerors – Commercial Items” and any other instructions contained elsewhere in this solicitation, the following instructions are provided.

Contracting Department, intends to negotiate a firm fixed price contract, utilizing the procedures under

FAR Part 13, Simplified Acquisition Procedures. The Government intends to solicit and negotiate

Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems

2572-3901 2018-01 JNEDAH

Journal of Engineering for Sustainable Buildings and Citites

2642-6641 2019-07 JESBC

Journal of Autonomous Vehichles and Systems 2690-702X 2020-01

JAV

ASME Letters in Dynamic Systems and Control 2689-6117 2021-01

ALDSC

with only one source. Award will be made to the quoter whose quote is most advantageous to the

Government under the selection criteria set forth in this solicitation.

INSTRUCTIONS FOR SUBMISSIONS OF QUOTES:

(1) Quote shall be submitted electronically no later than the due date of the solicitation via email to

Porchia Locke at Porchia.y.locke.civ@us.navy.mil.

(2) Quoters shall comply with all instructions and inserting CLIN amounts. Quotes shall contain pricing for the base and all options.

i) Quote shall be emailed directly to the contract specialist listed above ii)Quote shall include the following legend on the page:

Source Selection Information FAR 2.101 and FAR 3.104

Quote Content:

The quote should contain the following items in addition to other information required by this solicitation.

The Quote should indicate the following:

• Solicitation Number

• Name and Address of Quoter, and Cage Code

• Point of Contact name, telephone number, and email address

• Quote valid of 30 days following the solicitation closing date

Factor I- Technical

Factor I will be evaluated on an Acceptable/Unacceptable basis on whether the item(s) quoted meets the minimum specification in the solicitation. Failure to meet the minimum specification will result in a rating of unacceptable. Quoter shall provide access to all online Journal subscriptions in the above

PWS.

Factor II – Price

The Price Quote shall include the completed solicitation documents. The price quote shall include all elements of price and such other price information considered appropriate to support the quoter’s quote. The pricing information shall be completed in accordance with the following:

(a) Unless completed in SAM, 52.212-3 Offeror Representations and Certification –

Commercial Items

- Completed by the quoter.

The price submission is not page limited, but is strictly limited to price information.

52.212-2 ADDENDUM

ADDENDUM TO FAR PROVISION 52.212-2, EVALUATION – COMMERCIAL ITEMS:

a) The Government will award a FFP order resulting from this solicitation to the responsible Quoter whose offer conforming to the solicitation will be most advantageous to the Government, technical, price and other factors considered. The Government will be utilizing FAR part 12 and FAR part 13 procedures. The following factors shall be used to evaluate offers:

Technical and Price

Factor I- Technical

Factor I will be evaluated on an Acceptable/Unacceptable basis on whether the item(s) quoted meets the minimum specification in the solicitation. Failure to meet the minimum specification will result in a rating of unacceptable. Quoter shall provide access to all online Journal subscriptions in the above

PWS.

In order to be considered Acceptable, quoters must receive an acceptable rating for Factor I in its entirety.

Rating Tables

Technical Acceptable/Unacceptable Ratings Table

TABLE I

Rating Description

Acceptable Quote clearly meets the minimum requirements of the solicitation

Unacceptable Quote does not clearly meet the minimum requirements of the solicitation

Factor II– Price

The quoters quoted price will be evaluated on the basis of price reasonableness in accordance with

FAR 13.106-3(a). Total price will be evaluated including base and all options.

The evaluation may include, but is not limited to the following:

A. Price comparison with other quoters;

B. Comparison with independent government estimates

By submitting a quote, the quoter affirms that they are capable of performing and completing the work described in the Solicitation.

The Government will award on the basis of price unless the contracting officer is aware of past performance information related to the low price quote/offer which indicates that quote/offer may not represent best value. In that case, the Government reserves the right to consider the past performance of other quotes/offers, conduct a price, past performance tradeoff, and award to other than the lowest price quote/offer.

The Government intends to award a Firm Fixed priced purchase order to the responsible quoter whose quote represents the best value after evaluation in accordance with the factors in the solicitation.

b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

Section Contract Clauses

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2018

52.204-13 System for Award Management Maintenance OCT 2018

52.204-16 Commercial and Government Entity Code Reporting AUG 2020

52.204-18 Commercial and Government Entity Code Maintenance AUG 2020

52.204-22 Alternative Line Item Proposal JAN 2017

52.212-1 Instructions to Offerors--Commercial Products and

Commercial Services

SEP 2023

52.212-4 Contract Terms and Conditions--Commercial Products and

Commercial Services

DEC 2022

52.213-2 Invoices APR 1984

52.217-5 Evaluation Of Options JUL 1990

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.247-34 F.O.B. Destination NOV 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

JAN 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

JAN 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services

JAN 2023

252.204-7022 Expediting Contract Closeout MAY 2021

252.225-7001 Buy American And Balance Of Payments Program--Basic JAN 2023

252.225-7002 Qualifying Country Sources As Subcontractors MAR 2022

252.225-7048

252.232-7010

Export-Controlled Items

Levies on Contract Payments

JUN 2013

DEC 2006

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.244-7000 Subcontracts for Commercial Products or Commercial

Services

JAN 2023

252.247-7023 Transportation of Supplies by Sea JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it

"does not provide covered telecommunications equipment or services as a part of its offered products or services to the

Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services--Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services. The

Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM)

(https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

***See Addendum for additional information***

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

See Addendum 52.212-2 (Contracting Officer shall insert the significant evaluation factors, such as (i) technical capability of the item offered to meet the Government requirement; (ii) price; (iii) past performance (see FAR 15.304); and include them in the relative order of importance of the evaluation factors, such as in descending order of importance.)

Technical and past performance, when combined, are See Addendum 52.212-2. (Contracting Officer state, in accordance with FAR 15.304, the relative importance of all other evaluation factors, when combined, when compared to price.)

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (SEP 2023)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision --

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition on

Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

https://www.sam.gov/

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

"Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

"Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

"Inverted domestic corporation" means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

"Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

"Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

"Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor.

"Reasonable inquiry" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain

Telecommunications and Video Surveillance Services or Equipment.

"Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan

Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the

Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

"Sensitive technology"--

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C.

1702(b)(3)).

"Service-disabled veteran-owned small business concern"--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern"--

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

"Small disadvantaged business concern, consistent with 13 CFR 124.1001", means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13

CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding the threshold at 13 CFR 124.104(c)(2) after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

"Subsidiary" means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

"Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

"Veteran-owned small business concern" means a small business concern--

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

"Women-owned small business concern" means a small business concern--

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

"Women-owned small business (WOSB) concern eligible under the WOSB Program" (in accordance with 13 CFR part

127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b) (1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror

Representations and Certifications--Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

http://www.sam.gov/

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that--

(i) It [ ___ ] is, [ ___ ] is not a small business concern; or

(ii) It [ ___ ] is, [ ___ ] is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ ]

(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it

[ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that--

(i) It [ ___ ] is, [ ___ ] is not a service-disabled veteran-owned small business concern; or

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR 125.18(b)(1) and (2). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .] Each service-disabled veteran-owned small business concern participating in the joint venture shall provide representation of its service-disabled veteran-owned small business concern status.

(4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it [ ___ ] is, [ ___ ] is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it [ ___ ] is, [ ___ ] is not a women-owned small business concern.

(6) WOSB joint venture eligible under the WOSB Program. The offeror represents that it [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .

(7) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The offeror represents that it [

___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .]

(8) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, as having been certified by SBA as a HUBZone small business concern in the Dynamic Small Business Search and SAM, and will attempt to maintain an employment rate of HUBZone residents of 35 percent of its employees during performance of a HUBZone contract (see 13 CFR 126.200(e)(1)); and

(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .] Each

HUBZone small business concern participating in the HUBZone joint venture shall provide representation of its HUBZone status.

(d) Certifications and representations required to implement provisions of Executive Order 11246--

(1) Previous Contracts and Compliance. The offeror represents that--

(i) It ( ___ ) has, ( ___ ) has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation, and

(ii) It ( ___ ) has, ( ___ ) has not, filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that--

(i) It ( ___ ) has developed and has on file, ( ___ ) has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR Subparts 60-1 and 60-2), or

(ii) It ( ___ ) has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no

Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of

Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying

Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American

--Supplies, is included in this solicitation.)

(1) (i) The Offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that each domestic end product listed in paragraph (f)(3) of this provision contains a critical component.

(ii) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select "no''.

(iii) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see

FAR 25.105).

(iv) The terms "commercially available off-the-shelf (COTS) item," "critical component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-

Supplies."

(2) Foreign End Products:

Line Item No. Country of origin

Exceeds 55% domestic content

(yes/no)

[List as necessary]

(3) Domestic end products containing a critical component:

Line Item No.

(4) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.

(g)(1) Buy American--Free Trade Agreements--Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act, is included in this solicitation.)

(i) (A) The Offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (iii) of this provision, is a domestic end product and that each domestic end product listed in paragraph (g)(1)(iv) of this provision contains a critical component.

(B) The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product,'' "commercially available off-the-shelf (COTS) item,'' "critical component,'' "domestic end product," "end product," "foreign end product," "Free Trade

Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act."

(ii) The Offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act."

Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End

Products) or Israeli End Products:

(iii) The Offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American--Free Trade Agreements--Israeli Trade Act."

The Offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select "no''.

Other Foreign End Products:

Exceeds 55% domestic content

(yes/no)

[List as necessary]

(iv) The Offeror shall list the line item numbers of domestic end products that contain a critical component (see FAR

25.105).

(v) The Government will evaluate offers in accordance with the policies and procedures of FAR part 25.

(2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR

52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act":

Israeli End Products:

(3) Buy American--Free Trade Agreements--Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at FAR

52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than

Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American --Free Trade Agreements--Israeli Trade Act":

Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian

End Products) or Israeli End Products:

(4) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(4)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements".

(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.

Other End Products:

(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting

Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation.

(h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals--

(1) [ ___ ] Are, [ ___ ] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency;

(2) [ ___ ] Have, [ ___ ] have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property;

(3) [ ___ ] Are, […