3DScanner System SOW FINAL.docx

STATEMENT OF WORK

3D SCANNER SYSTEM

1.0 SCOPE:

The Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD) -Department (Code D1) requires 3D scanning capability to build 3D models of ordnance articles. For each ordnance article, a complete 3D model of the article is required for accurate replication by geometry and imagery. Ordnance articles currently range in size from 0.125-cu.ft (0.5’ x 0.5’ x 0.5’) to about 0.625-cu.ft (0.5’ x 0.5’ x 2.5’) 0700 1130 1200 1530. The Government requires a 3D scanning system and on-site training.

3D Scanning system procurement requirements summary:

· Artec Scanner Bundle; two handheld 3D scanners (one Artec Leo, and one Artec SpaceSpider)

· Scanner Controller System(s) capable of:

· All software capable of running the system

· Running all software required to both capture and process scanned data into output files

· File/digital-data and network management (storage and/or transfer-capable) for unclassified and/or classified data.

· Automated rotary table for use with handheld 3D scanner

· One Artec Studio Software license The scanners should be capable of automation applications which encompass preset and customizable scanning configurations within the scanning equipment procured here in as well as scanner control (scan start/stop) through external interface bus (USB or other communication bus) from an external embedded or microprocessor controller (not supplied by this procurement). Scanning system/equipment must be capable of configuration/control via an Application Programming Interface (API) or Software Development Kit (SDK).

2.2 TRAINING

The Contractor shall provide on-site introductory user training for 6 Government employees for a minimum of 4 hours 15 days after receipt of system. Training will be conducted at NSWC IHEODTD Building 2195 Stump Neck Annex. Training will focus on:

· properly configure/initialize the COTS system(s),

· demonstrate API/SDK capabilities on scanner(s),

· configure the system(s) to digitize Government-supplied ordnance articles, and

· initial-batch-process at least 10 ordnance articles.

2.3 OPTIONAL REQUIREMENTS:

· Option 1: Artec Studio License option to extend maintenance and upgrades for a 2nd year

· Option 2: Artec Studio License option to extend maintenance and upgrade for a 3rd year

· Option 3: Additional scanner controller(s): 1-3 additional

· Option 4: One or two additional handheld scanner bundle (either Space Spider + Leo and/or Space Spider + Eva)

· Option 5: Additional turntable(s): 1-3 additional

3.0 CONTRACTOR PERSONNEL

Contractor personnel providing the installation and training are required to be U.S. Citizens.

4.0 GOVERNMENT TECHNICAL REPRESENTATIVE

The assigned technical representative for this contract is as follows:

POC: William Haris, Code D25 Phone: 301-744-6861 Desk; 301-802-5875 CELL Email: william.haris@navy.mil