36E77618Q0024-004.docx

CLIN 0024 (18LCEEFSA ISOTEMP 17.6CF VALUE COMBO 120)

Laboratory Grade Freezer Fridge Combo Salient Characteristics Three laboratory grade freezer fridge combinations are needed for the MHR Building activation. Each freezer fridge must fulfill the following requirements:

· cCSAus certified

· 18 cu. ft. capacity

· Exterior dimensions not to exceed 31” l x 30” w x 40” high

· interior dimensions fridge: ~ 25” X 26” X 40”

· Interior dimensions freezer: ~ 21” X 26” X 16”

· Epoxy enameled steel chamber material

· ABS Plastic interior finish

· Epoxy enameled steel exterior finish

· Have rolling casters

· 115 V/60Hz, 6 Amp, 690w

· CFC Free refrigerant

· Net weight 200-300lbs.

· Fridge Temperature Range 1º to 12ºC

· Freezer Temperature Range -12º to -20ºC

· Temperature set point adjustable

· Interior lighting

CLIN 0025 (13 201 632 DURAC PLUS THERMOMETER)

Precision Partial Immersion Thermometer Salient Characteristics 6 partial immersion precision grade thermometers are needed for the MHR Building activation. Each precision grade thermometer must fulfill the following requirements:

· ISO/IEC 17025:2005, A2LA, NIST certified

· 24” long

· Glass

· Organic fill- NO Mercury

· 3” immersion length

· Temp Range: -1º to +201ºC

· Accuracy:

· 1 at -1º to +100º

· 1.5 at +100º to +201ºC

· Subdivisions in .2ºC

CLIN 0026 (11 676 20 STORAGE CHEST 5CU FT MDL 301)

Dry Ice Storage Chest Salient Characteristics Two Dry Ice Storage Chests are needed for the MHR Building activation. Chest must fulfill the following requirements:

· Be designed to contain dry ice or wet ice

· Outer dimensions ~ 28” X 19” 25” (L W H)

· ~90KG capacity

· Tight fitting plug lid

· Come with durable castors or dollies for easy transport

CLIN 0027 Repeat Pipettor (14 287 150 REPEATER M4) Based on design Fisher Cat# 14 287 150 REPEATER M4

· Step counter: Displays the number of executed dispensing steps

· Ergonomically shaped operating lever: Dispenses the liquid and ejects the Combitip advanced

· Ergonomically shaped filling lever: For filling and emptying the Combitip advanced

· Volume selection dial: 20 different volume settings for every Combitip size; Easy to reach and adjust using your thumb

· Hand rest: Supports relaxed hand position and ease of use

· Motion Sensor: Repeater switches off when not in use, and back on with minimal movements to save power and time

· Combitip sensor: Automatic Combitip recognition and volume display

· Embedded RFID chip

· Supports error-free working even after an interruption or distraction during dispensing procedure Step counter: Displays the number of executed dispensing steps Volume selection dial: 20 different volume settings for every Combitip size;

Motion Sensor: Repeater switches off when not in use, and back on with minimal movements to save power and time Sensor for Automatic Combitip recognition and volume display Embedded RFID chip Wall or carousel holder dispenses liquid directly without air cushion

CLIN 0028 (FBE800050 FISHERBRAND ELITE 8-CH 5-50UL) Multichannel pipette, 5 to 50μL volume Based on design Fisher Cat# FBE800050 FISHERBRAND ELITE 8-CH 5-50UL Accuracy 1.5 to 5% Increments 0.1μL Volume (Metric) Range 5 to 50μL Autoclavable Yes Number of Channels at least 8 but allowable up to 12 Volume (Metric) 5 to 50μL

CLIN 0029 (05 719 511 FINNPIPETTE F2 GLP-KIT2 (0.2-1)

Manual pipets, package including sizes 0.2-2μL micro, 2-20μL, 20-200μL and 100-1000μL Based on design Fisher Cat# 05 719 511 FINNPIPETTE F2 GLP-KIT2 Must include at least 4 pipets covering 0.2-2µL

· 2-20µL univ

· 20-200µL

· 100-1000µL 0.2-2µL, 2-20µL, 20-200µL, 100-1000µL Precision gearing mechanism for accuracy Fully autoclavable Soft-touch tip ejector for light tip ejection Large display for better vision ergonomics Very light pipetting forces If package includes pipet stand then CLIN 0049 is not required

CLIN 0030 (14 387 14 PIPETTE STAND GRAY HOLD 6PIPET) Pipet holder stand Based on design Fisher Cat# 14 387 14 PIPETTE STAND GRAY HOLD 6PIPET Holds manual pipette Holds 6 positions Must be compatible with CLIN 6

CLIN 0031 (14 140M RUB STPR 2 HOLE NO10 APPX 8/PK) Two-hole Rubber stoppers for Size 10 mouthed Erlenmeyer flasks Based on design Fisher Sci Cat# 14 140M RUB STPR 2 HOLE NO10 APPX 8/PK Two-hole taper stopper Diameter (English) Bottom 1.654 in.

Diameter (English)Top 1.969 in.

Length (English) 0.984 in.

Size 10 Total Positions: 2.0 Material: Natural Rubber

CLINs 0032 and 0033 (02 215 414 VORTEX MIXER ANALOG 120V & 02 215 388 FOAM INSERT KIT WITH RETAINER) Analog vortex mixer and foam adaptor insert Based on design Fisher cat# 02 215 414 VORTEX MIXER ANALOG 120V and Fisher Cat# 02 215 388 FOAM INSERT KIT WITH RETAINER Used for flasks, beakers, tubes and microwell plates Touch mode mixer with three-way power switch Orbit: approximately 4.9mm Speed knob: Variable 1 to 10 dial marks covering 300 to 3200rpm L x W x H approximately equal to: 20.2 x 12.1 x 12.7cm (8 x 4.75 x 5in.)

Small footprint required 5 year warranty minimum 120 V Must come with or have optional foam inserts / adaptors to accommodate multiple tube quantities, tubes sizes, and or plates. Holder must accommodate 9 to 13mm, 14 to 19mm and 20 to 25mm tubes; provide flat form insert, vessel harness, insert retainer Must come with adaptor / retainer to secure foam adaptor

CLIN 0034 (02 215 450 MULTI-TUBE VORTEX MIXER 120V) Multi-tube vortexer, adjustable Design based on Fisher Sci Cat# 02 215 450 MULTI-TUBE VORTEX MIXER 120V continuous-duty motor quiet, rattle-free mixing Top plate adjusts along two stainless-steel posts; removable for easy sample access Rugged corrosion-resistant, stainless-steel base Suction-cup feet dampen motion and prevent sliding Orbit: 3.6mm Speed range: 500-2500rpm Automatic timer (0 to 60 sec. for simple repeat procedures) Tube capacity up to 50 Dimensions (L x W x H) Exterior (approximately equal to) 9.5 x 15 x 16 in. (24.1 x 38.1 x 40.6cm) 120V, 60hz, 100W Analog

CLIN 0035 (01 910 322 XS105DU 120G/41GX0.1MG/0.01MG)

Analytical Balance Based on design Fisher Sci Cat# 01 910 322 Metler Toledo XS105DU 120G/41GX0.1MG/0.01MG Type: Analytical balance Certifications/Compliance: GLP, ISO 9001, UL, CSA Capacity Offset Load: 0.3mg Capacity: 41 / 120g Linearity: ±0.2mg Repeatability: 0.02mg/0.05mg Readability: 0.01 / 0.1mg Must include Protective cover for the terminal, AC/DC adapter, power supply cable, set of weighing boats, 10 disposable Aluminum pans and 1 Stainless Steel pan, fully automatic internal adjustment Stabilization Time of 3 sec. or better Temperature Range: 5 to 40°C Electrical Requirements: 100/240V 50/60Hz Dimensions must approximate (L x W x H): 45.3 x 26.3 x 32.2cm Warranty 1 Year with 9 yr extension option for later acquisition Must have glass slide cover / doors to stabilize weigh chamber Must come with weigh pan

· Unique, slotted SmartGrid™ weigh pan is suspended inside weighing chamber, providing flexible weighing surface for speed and accuracy

· Pan lifts out for easy cleaning, minimizes chance of contamination Spills fall into sealed base plate, won't interfere with weighing

· SmartGrid pan and ErgoClip™ accessory (order separately) act as a grounding system to remove static from weighing samples

· Fully Automatic Calibration Technology (FACT) ensures precision and accuracy Weigh Pan must lift out for easy cleaning, Must have sealed base plate that does not interfere with weighing Must come with or provide optional components to reduce or remove static from weighing samples Must provide onboard software that performs automatic calibration Must include install, training, calibration

CLIN 0036 (06 664 11 FISHER REFRIG FREZ THERMOMETER) Fridge/freezer verification thermometer Based on design Fisher Sci 06 664 11 FISHER REFRIG FREZ THERMOMETER Triple display simultaneously shows Min/max and current temperatures, °F/°C switchable 5mL or 10mL bottle acceptable Probe is sealed in glycol solution in bottle containing probe/sensor Ten-foot micro-cable permits refrigerator doors to close on it Minimum/maximum memory monitors high and low readings overnight, on weekends, or for any time period programmable alarm in 1° increments, sounds continuously when temperature rises above/falls below set points and can be turned off manually High-impact, chemical-resistant ABS plastic case Temperature range: -50 to +70°C/-58 to +158°F Resolution: 1° accuracy: ±1C

CLINs 0037, 0038, 0039 Salient Characteristics for Flake ice maker, ice maker filter, ice machine install kits Based on 09540115 ICE MACHINE INSTALL KITS, 09 540 121 ICE MAKER WATER FILTER, 09 540 104 FLAKE ICEMAKER Description

· Fit under most 40 in. counters

· Set directly on floor or mount on adjustable 6 in. legs

· Front ventilation

· Can be serviced completely from the front Fit under most 40’ counters Sets directly on floor mount or mount on adjustable 6” legs Front ventilation Serviceable from the front UL/ULC listed 3 yr parts and labor, 5yr warranty on compressor Ambient temp 50-100dF 15A 110-120V 24”depth x 33”high Self-contained unit produces and stores fresh flaked ice Yields flake ice, 179 to 395 lb. at 50°/70°, 160 to 300 lb. at ARI 70°/90° At least 80lbs capacity Must come with Install package and filters that are compatible with unit Daily, weekly and monthly self-tests of battery, internal electronics, software and pads Weekly, the AED partially charges the high-voltage electronics Monthly, the AED charges the high-voltage electronics to full energy 7yr warranty Fully stocked with consumables, quick tool kit for instant usability, service

CLIN 0040 (MIVX4 METROMAX CART (NC1381613) IV Storage cart / shelf Based on design MetroMax I IV Transport/Storage system MX i V4 Stainless steel construction with open design 24in wide x 42in length x 60in high Must come with 8 stainless steel baskets Must come with casters

CLIN 0041 (RCS10DS MICROWAVE) Lab Microwave, heavy duty Based on design Fisher Sci cat# RCS10DS Must have Automatic voltage sensor, removable air filter with clean filter reminder, interior lights Cabinet Material: Stainless Steel Width Interior 22″ Electrical Requirements 120V 60Hz Amperage 15A Depth Interior ~19 in.

Height Interior ~14 in.

Hertz 60Hz Wattage 1550w

CLIN 0042 (13-201-567 THERMOMETERS) Incubator verification Thermometers based on design Fisher Sci cat# 13-201-567 Temp range 15-50dC Thermometer fill: blue, organic Bottle Fill: Glass Beads Certifications/Compliance: ISO/IEC 17025:2005, A2LA, NIST, DakkS

CLIN 0043 Pipette Fillers, electric Based on design 9511 S1 PIPET FILLERS (Fisher Sci cat # 14-387-164 ) Must have adjustable Dispensing Speed (+ Gravity Dispense) Filter Type 0.45 Micron Standard Pipet must come with universal charger, table stand, wall-mounted holder, 1mL pipet support, instruction manual and warranty card Warranty 2-years minimum Electrical Requirements 100 to 240V 50/60Hz Must accept All major brands of glass or plastic serological pipets, 1 to 100mL 100 to 240V Volume (Metric) Range 1 to 100mL

CLIN 0044 (07-578-3B DRIERITE) DRIERITE

CAS 7646-79-9

5 lb per bottle

CLIN 0045 (FB5004000 4L ERLENMEYER FLASKS) 4 liter glass erlenmeyer flasks

· Reinforced top tooled with a rounded finish

· Thick-walled body

· White ceramic enamel marking spot Reinforced top tooled with a rounded finish Thick-walled body White ceramic enamel marking spot Size 10 closure size Reusable glass 250ml graduations 4000ml capacity

CLIN 0046 lab timers Based on design 06-662-46 TIMERS (Fisher sci) Three Line Alarm Timer Must have audible and visual alarms LCD display up to 99 Hours 59 min. 59 sec.

Magnetized backing preferred to stick to lab shelving

CLIN 0047 general purpose water bath, 5 liter Based on design TSGP05 WATER BATH (Fisher Sci)

CLIN 0048 Salient Characteristics for dual 5L & 10L general purpose water bath Based on TSGP15D WATER BATH (Fisher Sci) Bath Volume 15L (4.0 GAL) Temperature Range (Metric) Ambient to 100°C Chamber Material: Stainless steel Must have adjustable Temperature Presets 120V Certifications/Compliance UL, CE Controller Type: Digital Includes: 2 Clear Polycarbonate Gable Covers, 2 Diffuser Trays Heating Capacity 1100W Epoxy powder-coated steel Dimensions (L x W x H) Exterior 15.4 x 23.1 x 9.2 in. (392 x 587 x 233mm) Display Monochrome LCD Temperature Stability ±0.1 °C

CLINs 0049 & 0050 Lab Balance/scale and installation Based on design ML802T BALANCE (Fisher Cat 01-914-017) and 1909400 Install package

· Compact and convenient design

· Large, 4.5 in. color TFT touchscreen with clear icons and intuitive guidance enables users to operate quickly and easily

· Multilingual text and graphics provides step wise guide to weighing procedures

· MonoBloc weighing cell with FACT internal adjustment delivers consistently reliable results

· Built-in overload protection ensures long balance lifetime

· Efficient weighing-in guide at the top of the display to help operator dose to target

· MinWeigh function ensures process tolerances

· Built-in LevelControl function issues warning when the balance is not level; also provides onscreen guidance to help level balance within seconds

· QuickLock for quick and easy cleaning

· Balance housing with smooth, rounded edges for easy cleaning

· Metal bottom housing

· Statistical data analysis

· ISO-Log

· Option to input sample ID

· Passcode protection

· Three interfaces: USB device, USB host and RS-232

· Bluetooth option

· PC direct for easy data transfer 820 gram capacity 0.01g/0.007g repeatability 0.01g readability

1.5 sec stabilization time CE marked, ISO 9001, ISO 14001 certification Large, 4.5 in. color TFT touchscreen with clear icons and intuitive guidance enables users to operate quickly and easily Multilingual text and graphics provides step wise guide to weighing procedures MonoBloc weighing cell with FACT internal adjustment Built-in overload protection ensures long balance lifetime Efficient weighing-in guide at the top of the display to help operator dose to target MinWeigh function ensures process tolerances Built-in LevelControl function issues warning when the balance is not level; also provides onscreen guidance to help level balance within seconds Features for quick and easy cleaning Balance housing with smooth, rounded edges for easy cleaning Metal bottom housing Three interfaces: USB device, USB host and RS-232 Warranty Installation, training, calibration

CLIN 0051

Shelving unit Based on design A3036NS SHELVING UNITS (Fisher Cat) Metro™ Super Adjustable™ Super Erecta™ Wire Shelf - Stainless Steel Finish

· Shelves adjust in 1 in. increments with patented shelf release corners

· Shelf releases and wedges offer improved rigidity

· Assembles quickly without tools

· Assembled units are nonconductive

· Maximum corrosion resistance

· Nonporous surface is easily cleaned

· Combine with Super Erecta Stationary or Mobile posts and accessories to create custom configurations for storage and transportation

· Patented corner release system allows for easy height adjustment

· Custom position your shelves for maximum storage density

· One-year warranty Capacity:

· Shelves up to 48 in. wide; 800 lbs per shelf capacity (evenly distributed)

· Shelves wider than 48 in.; 600 lbs per shelf (evenly distributed) Shelves adjust in 1 in. increments with patented shelf release corners Shelf releases and wedges offer improved rigidity Assembles quickly without tools Assembled units are nonconductive Maximum corrosion resistance Nonporous surface is easily cleaned Is able to combine with Super Erecta Stationary or Mobile posts and accessories to create custom configurations for storage and transportation easy height adjustment Custom position your shelves for maximum storage density One-year warranty Capacity:

Shelves up to 48 in. wide; 800 lbs per shelf capacity (evenly distributed) Shelves wider than 48 in.; 600 lbs per shelf (evenly distributed) 36 x 30 in.

CLIN 0052

Salient Characteristics for step-open metal trash cans Based on ST24 STEP CANS (FGST24ERBWH – no liner) The Defenders Stainless steel design Must have front step function to open lid Has internal attachment points to accept trash bags and liners 24 gallon capacity

CLIN 0053

Salient Characteristics for AED Pro Based on design 19-172-012 Fisher Cat Automated External Defibrillator Intuitive and comprehensive voice and text prompts guide the user through the rescue Full-color ECG display Infrared data communications Features include noncommitted shock, pacemaker detection, and synchronized shock Built-in metronome (which can be switched off) can set the pace for CPR compressions

CLIN 0054

Salient characteristics for 24oz ice scoop Based on 24OZ ICE SCOOP (Fisher cat# NC0646063) Must be made of aluminum Must be 24oz size

CLIN 0055

Benchtop mini centrifuge Based on Fisher brand 12-006-901

· Small footprint and quiet operation

· UV resistant housing o SnapSpinTM rotors for quick and easy change

· Compact ergonomic design and footprint

· Max speed 6,000rpm/2,000xg

· Weighted rubberized base eliminates potential movement and further dampens any noise output

· Includes one-year warranty small footprint for benchtop use quiet operation weighted, rubberized base to eliminate movement one year warranty 110v Max rcf 2000xg Comes with rotor to accommodate 2 different sized tubes: Rotor 1: 6 x 1.5/2mL tubes (adapters for 0.5mL and 0.2ml tubes) Rotor 2: 2 places for 8 x 0.2mL strips or 16 single tubes image1.wmf