Wage_Determination_Attachment_D.docx

WD 15-5473 (Rev.-6) was first posted on www.wdol.gov on 08/07/2018

Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts

State: Arizona

Area: Arizona County of Pima

**Fringe Benefits Required Follow the Occupational Listing**

19.69

Administrator

18.14

15.70

17.56

19.57

14.80

18.32

20.51

25.09

30.35

15.51

16.98

15.79

17.66

19.69

21.88

24.23

I

23092 - Aircrew Life Support Equipment (ALSE) Mechanic 27.70

II

Mechanic 23411 - Heating, Ventilation And Air Contidioning 23.39 Mechanic (Research Facility)

24620 - Family Readiness And Support Services 15.67 Coordinator

15.67

23.66

22.20

23.66

17.20

22.20

18.93

11.24

20.11

22.42

12.57

20.11

20.11

11.24

12.57

25.67

29.60

12.65

13.57

10.01

15.40

13.72

17.23

13.08

16.99

13.72

16.28

20.10

20.10

20.10

18.98

21.60

18.47

20.66

25.60

25.60

25.13

26.27

29.03

18.47

20.66

23.03

28.34

14.98

16.21

18.81

21.77

26.63

32.22

21.80

23.73

30210 - Laboratory Technician

20.21

30221 - Latent Fingerprint Technician I

22.64

30222 - Latent Fingerprint Technician II

25.01

30240 - Mathematical Technician

25.60

30361 - Paralegal/Legal Assistant I

21.49

30362 - Paralegal/Legal Assistant II

26.65

30363 - Paralegal/Legal Assistant III

28.53

30364 - Paralegal/Legal Assistant IV

34.52

30375 - Petroleum Supply Specialist

29.03

30390 - Photo-Optics Technician

25.60

30395 - Radiation Control Technician

29.03

30461 - Technical Writer I

21.90

30462 - Technical Writer II

26.79

30463 - Technical Writer III

32.41

30491 - Unexploded Ordnance (UXO) Technician I

24.41

30492 - Unexploded Ordnance (UXO) Technician II

29.54

30493 - Unexploded Ordnance (UXO) Technician III

35.40

30494 - Unexploded (UXO) Safety Escort

24.41

30495 - Unexploded (UXO) Sweep Personnel

24.41

30501 - Weather Forecaster I

28.34

30502 - Weather Forecaster II

34.47

Surface Programs

31010 - Airplane Pilot

29.54

31020 - Bus Aide

15.68

31030 - Bus Driver

20.81

31043 - Driver Courier

13.85

31260 - Parking and Lot Attendant

12.41

31290 - Shuttle Bus Driver

14.85

31310 - Taxi Driver

11.82

31361 - Truckdriver, Light

14.85

31362 - Truckdriver, Medium

16.77

31363 - Truckdriver, Heavy

21.44

31364 - Truckdriver, Tractor-Trailer

21.44

99000 - Miscellaneous Occupations

99020 - Cabin Safety Specialist

14.40

99030 - Cashier

10.60

99050 - Desk Clerk

10.68

99095 - Embalmer

25.32

99130 - Flight Follower

24.41

99251 - Laboratory Animal Caretaker I

12.22

99252 - Laboratory Animal Caretaker II

13.10

99260 - Marketing Analyst

25.92

99310 - Mortician

25.32

99410 - Pest Controller

17.51

99510 - Photofinishing Worker

12.83

99710 - Recycling Laborer

16.80

99711 - Recycling Specialist

19.59

99730 - Refuse Collector

15.41

99810 - Sales Clerk

12.63

99820 - School Crossing Guard

9.98

99830 - Survey Party Chief

28.41

99831 - Surveying Aide

16.07

99832 - Surveying Technician

19.94

99840 - Vending Machine Attendant

12.73

99841 - Vending Machine Repairer

15.36

99842 - Vending Machine Repairer Helper

12.73

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.48 per hour or $179.20 per week or $776.53 per month

HEALTH & WELFARE EO 13706: $4.18 per hour, or $167.20 per week, or $724.53 per month*

*This rate is to be used only when compensating employees for performance on an SCA- covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the U.S.

Department of Labor, Wage and Hour Division, for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1)).