36C25719Q1320-004.pdf

Purchase Descriptions.

The purchase description should identify the requirement in terms that enable contractors to offer commercial supplies or services. The description should not be restrictive and not be limited to one product peculiar to a manufacturer (e.g., by manufacturer, brand name and Part Number) unless it is essential to the Government’s minimum requirement.

A purchase description should include the following characteristics based on the requirement to adequately describe the Government’s needs:

(Please fill in the blocks provided with the information that is requested. If not applicable, then so state)

a. Common Nomenclature (commercial description): Maxi Sky 2 plus Lift

b. Kind of material (i.e., type, grade, alternatives, etc.): Plastic housing, metal and steel components.

c. Electrical Data (i.e., 110 v, 60 Hz, 3 Ph, etc.):

Provides a minimum of 100 transfers with a load minimum of 440 lb (200 kg), up to 50 transfers with a minimum load of 880 lb (400 kg) and minimum 30 transfers with a load of 1000 lb (454 kg).

d. Dimensions, size, capacity:

-Weight, complete (incl trolley and two ceiling lifts): not to exceed 120lbs -Weight spreader bar: Not to exceed 20 lbs -Lifting Capacity: Dual Mode: Minimum 1000lbs, Single Mode: Minimum 600lbs, -Strap Length: Between 95” to 100” Lifting Speed (dual Mode): Minimum 1 inch a second Maximum Stroke (From Ceiling): 91” Horizontal Displacement speeds: N/A, Manually operated Operating Force of Control: Less then 5N Push and pull forces at 1000lbs horizontal movement and rotation: Less then 60N Duty Cycle: up/down motor: Max 10%, 1 minute continuously Sit/reclined Motor (single mode): Max 10%, 1 minute continuously

Noise level: without load not to exceed 60 dBA At 1000lb load not to exceed 70 dBA

e. Principles of operation: Used for lifting and transporting patient room to room

f. Restrictive environmental conditions:

Ambient Temp range: Minimum 50F to 100F Relative Humidity range: Minimum 20% to 90%

g. Intended use: To transport patients that are unable to ambulate under their own power.

h. Equipment with which the item is used with (N/A if not applicable): n/a

i. End item application: N/a

j. Original equipment manufacturer part number:

k. Other pertinent information that describes the item, material or service required: n/a