Combined Synopsis ATL Surgical Trays.docx

DOCX document 44 KB Posted

Attached to
ATL Surgical Trays
Solicitation number
36C24724Q0472
Issued by

About this file

This is a combined synopsis/solicitation for commercial items prepared in accordance with FAR Subpart 12.6. The Department of Veterans Affairs is seeking quotes for 61 ATL Surgical Trays from the Zimmer Biomet Instruments brand or equal. The associated NAICS code is 339112 - Surgical and Medical Instrument Manufacturing, with a small business size standard of 1,000 employees. The solicitation has a response due date of April 12, 2024 at 2:00 PM EST. Award will be made to the lowest priced, technically acceptable quote. Contractors offering equal products must provide descriptive literature. The place of performance is the Atlanta VA Medical Center in Decatur, GA. This is an unrestricted solicitation.

View the file

Other files

File Type Posted
ATL Surgical Trays Salient Characterstics.docx DOCX document
ATL Surgical Trays SOW.doc DOC document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Combined Synopsis/Solicitation Notice

ATL Surgical Trays

GENERAL INFORMATION

CONTRACTING OFFICE’S ZIP CODE*
30904
SOLICITATION NUMBER*
36C24724Q0472
RESPONSE DATE/TIME/ZONE
04-12-2024 2:00pm EASTERN TIME, NEW YORK, USA
ARCHIVE
15 DAYS AFTER THE RESPONSE DATE
RECOVERY ACT FUNDS
N
SET-ASIDE
None
PRODUCT SERVICE CODE*
6515
NAICS CODE*
339112

CONTRACTING OFFICE ADDRESS

Department of Veterans Affairs Atlanta VA Medical Center 1670 Clairmont Road Decatur, GA 30033

POINT OF CONTACT*

Ashley Stewart Ashley.stewart4@va.gov

PLACE OF PERFORMANCE

ADDRESS
Department of Veterans Affairs

Atlanta VA Medical Center

1670 Clairmont Road

Decatur, GA 30033

DESCRIPTION

General Information

Document Type:
Combined Solicitation/Synopsis
Solicitation Number:
36C24724Q0501
Posted Date:
April 4, 2024
Current Response Date:
April 12, 2024 at 2:00 p.m. (EST)
Product or Service Code:
6515 | Surgical and Medical Instrument, Equipment, and Supplies
NAICS Code:
339112 | Surgical and Medical Instrument Manufacturing

Contracting Office Address

VISN 07

Network Contracting Office 7 501 Greene St.

Augusta, GA 30901

Description This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, “Streamlined Procedures for Evaluation and Solicitation for Commercial Items,” as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued.

This is an unrestricted solicitation. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-03 effective February 23, 2024.

The associated North American Industrial Classification System (NAICS) code for this procurement is 339112- Surgical and Medical Instrument Manufacturing, with a small business size standard of 1,000 employees.

The FSC/PSC is 6515 | Medical and Surgical Instruments, Equipment, and Supplies All interested companies shall provide quotations for the following ATL Surgical Trays (Brand name or equal).

Contractors offering equal products shall provide descriptive literature describing equal characteristics.

Brand manufacturer: Zimmer Biomet Instruments

Item Number
Description
Quantity
Unit Price
0001
KT444401001 G7 STANDARD LINER PROV(C-H) INSTR KIT (110002769)
2
0002
KT444401013 G7 DUAL MOBILITY GEN 2 INSTR KIT (G7DM2)
2
0003
KT444401010 G7 EFFICIENT INSTR KIT (G7EFF)
2
0004
00120609001 ACETABULAR REAMET KIT 1MMINCREMENTS 36-70 (AR2)
2
0005
00780408000 OFFSET REAMER HANDLE
2
0006
KT444401005 G7 TYPE 1 HD PROV 28/32/36/40 INSTR KIT (110002768
2
0007
KT444403001 ARCOS GENERAL INSTR KIT (593100)
2
0008
KT444403004 ARCOS CONE PROX BODY TRIALS INSTR KIT (593103)
2
0009
KT444403006 ARCOS STS DSTL TRL/RMR 190 INSTR KIT
2
0010
KT444403005 ARCOS STS DSTL TRL/RMR 150/250 INSTR KIT (593104)
2
0011
KT444403017 ARCOS MACRO 21-25X190 STS INSTR KIT (593116)
2
0012
KT444403015 ARCOS MACRO 21-25X150 STS INSTR KIT (593114)
2
0013
KT444403002 ARCOS ASSEMBLY/DISASSEMBLY INSTR KIT (593101)
2
0014
KT444403007 ARCOS FLEXIBLE RMRS INSTR KIT (593106)
2
0015
KT594700201 PSN REV CORE ART SURFACE LEFT TRAY (PAS101)
2
0016
KT594700502 PSN REV CORE FEM TRIALS RIGHT (PRF402)
2
0017
KT594700620 PSN REV FEM AUG CORE UNIVERSAL (PFA500)
2
0018
KT594700020 PSN REV SPACER BLOCK TRAY (PSB300)
2
0019
KT594700140 PSN REV REAMER TRAY (PRR401)
2
0020
KT594700501 PSN REV CORE FEM TRIALS LEFT (PRF401)
2
0021
KT594700601 PSN REV CENTRAL CONE PREPTRAY (PCN101)
2
0022
KT594700010 PSN REV IMPLANTATION TRAY (PRG200)
2
0023
KTS594700110 PSN REV 135 STR/3MM STEM PROV SZ 10-18 (PST100)
2
0024
KT594700130 PSN REV 135/175 6MM OFF STEM PROV 10-18 (PST300)
2
0025
KT594700611 PSN REV LARGE DEFECT TRAY-W/META CONES (PCN201)
2
0026
KT594700300 PSN REV TIB FEM PREP TRAY (PTP100)
2
0027
KT594700000 PSN REV GENERAL INSTR TRAT (PRG100)
2
0028
KT594700312 PSN REV TIB PREP/TRIAL RTTRAY (MOD TIB) (PTP202)
2
0029
KT594700402 PSN REV CORE FEM PREP RIGHT TRAY (PFP304)
2
0030
KT594700202 PSN REV CORE ART SURFACE RIGHT TRAY (PAS102)
2
0031
KT594700401 PSN REV CORE FEM PREP LEFT TRAY (PFP303)
2
0032
KT594700311 PSN REV TIB PREP/TRIAL LEFT TRAY (MOD TIB)(PTP201)
2
0033
KT594700111 PSN REV MACRO 135 STR/3MMOFF STM PR TRAY (PS110)
2
0034
KT954700131 PSN REV MACRO 135/175 6MMOFF STEM PROV (PST310)
2
0035
KT594700120 PSN REV 175 STR/3MM OFF STEM PROV 10-18 (PST200)
2
0036
KT593701500 PSN TIB/GEN KIT (PTG151)
2
0037
KT593702030 PSN FEM/GEN P-REF KT SZ 4-12 (PFG204)
2
0038
KT593701060 PSN ADJ DRS/TRS KIT 3/7 DEG (PFT113)
2
0039
KT593703000 PSN PATELLA KIT (PPA301)
2
0040
KT593704021 PSN CR/MC SIZE 4-12 PROV KIT-LEFT (PPA301)
2
0041
KT593704022 PSN CR/MC SIZE 4-12 PROV KIT-RIGHT (PCR416)
2
0042
KT593704531 PSN PS/ CPS SIZE 4-12 PROVKIT- LEFT (PPS517)
2
0043
KT593704532 PSN PS/CPS SIZE 4-12 PROVKIT-RIGHT (PPS518)
2
0044
KT593705211 PSN CPS 3-12 LT (PCPS18)
2
0045
KT593705212 PSN CPS 3-12 RT (PCPS19)
2
0046
KT593704010 PSN PS/CPS/CR SZ3- RT/LT (PSNSZ3)
2
0047
KT593704810 PSN PS/CR/MC/SZ J TIB PROV KIT-RT/LT (PSNJT)
2
0048
KT593705700 PSN 14X +30MM TIBIAL STEMKIT (PST570)
2
0049
PSN CPS SZ J TIB PROV KIT-RT/LT (PCPSJT)
2
0050
00512005201 PATELLAR/FEMORAL DRILL 6.4MM DIA
2
0051
00590109000 2 DEGREE VALGUS RECUTTER
2
0052
00590109001 2 DEGREE VARUS RECUTTER
2
0053
00590301000 PATELLA OSTEOTOMY GUIDE
2
0054
00590708040 PATELLA OSTEO GDE CASE BRKT
2
0055
00590708043 2 DG VALGUS RE-CUTTR CASBRKT
2
0056
00590708044 2 DG VARUS RE-CUTTER CASE BRKT
2
0057
MIS SPACER/ALIGNMENT GUIDE, 10MM
2
0058
00598307012 MIS SPACER/ALIGNMENT GUIDE, 12 MM
2
0059
00598307014 MIS SPACER/ALIGNMENT GUIDE, 14MM
2
0060
42527200410 PERSONA TASP UC RIGHT 3-7CD TOP
2
0061
42527200510 PERSONA TASP UC RIGHT 4-11 EF TOP
2
0062
PERSONA TASP UC RIGHT 7-12 GH TOP
2
0063
42517200410 PERSONA TASP UC LEFT 3-7 CD TOP
2
0064
42517200510 PERSONA TASP UC LEFT 4-11EF TOP
2
0065
42517200610 PERSONA TASP UC LEFT 7-12GH TOP
2

Total Contract Price:

Place of Performance/Place of Delivery

Name:
Atlanta VA Medical Center
Address:
1670 Clairmont Road

Decatur, GA 30033

The full text of FAR provisions or clauses may be accessed electronically at http://acquisition.gov/comp/far/index.html.

The following solicitation provisions apply to this acquisition:

1. FAR 52.212-1, “Instructions to Offerors—Commercial Products and Commercial Services” (Nov 2021)

2. FAR 52.212-3, “Offeror Representations and Certifications—Commercial Products and Commercial Services” (May 2022) Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://www.sam.gov/portal in accordance with FAR 52.212-3, “Offerors Representations and Certifications–Commercial Items.” If paragraph (j) of the provision is applicable, a written submission is required.

The following contract clauses apply to this acquisition:

· FAR 52.212-4 Contract Terms and Conditions–Commercial Items (NOV 2021)

· 52.204-13, System for Award Management Maintenance (OCT 2018)

· 52.204-18Commercial and Government Entity Code Maintenance (AUG 2020)
· 52.232-40Providing Accelerated Payments to Small Business Subcontractors (NOV 2021

· 852.212-70 Provisions and Clauses Applicable to VA Acquisition of Commercial Items (APR 2020) The following subparagraphs of FAR 852.203-70 are applicable:

· 852.203-70, Commercial Advertising

· 852.212-71, Gray Market and Counterfeit Items

· 852.242-71, Administrative Contracting Officer

· FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders (Jan 2021) The following subparagraphs of FAR 52.212-5 are applicable:

52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) 52.219-28 Post Award Small Business Program Rerepresentation (NOV 2020) 52.222-3 Convict Labor (JUN 2003) 52.222-19 Child Labor--Cooperation with Authorities and Remedies (JAN 2020) 52.222-21 Prohibition of Segregated Facilities (APR 2015) 52.222-26 Equal Opportunity (SEP 2016) 52.222-36 Equal Opportunity for Workers with Disabilities (JUN 2020) 52.222-50 Combating Trafficking in Persons (OCT 2020) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) 52.225-1 Buy American-Free Trade Agreements-Israeli Trade Act (JAN 2021) Alternate I (JAN 2021) 52.225-13 Restrictions on Certain Foreign Purchases (JUN 2008) 52.232-33 Payment by Electronic Funds Transfer – System for Award Management [OCT 2018] All quoters shall submit the following:

• Offer (pricing) for All Items Listed All quotes shall be sent to the Ashley Stewart via email at Ashley.stewart4@va.gov.

Award will be based upon lowest priced, technically acceptable quote in accordance with the Simplified Acquisition Procedures of FAR 13.

BASIS FOR AWARD:

As this is a BRAND NAME OR EQUAL TO only requirement the award decision will be based solely on the price of all quotes received.

Once the Government determines there is/are a contractor(s) that can provide equipment that meet(s) the requirements of this request for quote, the Government reserves the right to communicate with only those contractors quoting the best-suited equipment and service to address any remaining issues.

Responses should contain your best terms, conditions.

ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS—COMMERCIAL ITEMS Provisions that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The version of FAR 52.212-1 in the addendum is tailored for Simplified Acquisition Procedures and supersedes the current version of FAR 52.212-1 contained in the FAR.

The following provisions are incorporated into 52.212-1 as an addendum to this solicitation:

52.212-1 INSTRUCTIONS TO QUOTERS—COMMERCIAL ITEMS

(a) North American Industry Classification System (NAICS) code and small business size standard are stated in the combined synopsis/solicitation.

(b) Submission of quotations. Submit quotations to the office specified in this solicitation at or before the exact time specified in this solicitation. Quotations may be submitted on letterhead stationery, or as otherwise specified in the solicitation. As a minimum, quotations must show-

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of quotations;

(3) The name, address, and telephone number of the quoter;

(4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) “Remit to” address, if different than mailing address;

(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3( b ) for those representations and certifications that the quoter shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(c) Period for acceptance of quotes. The quoters agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of quotes, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotations. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during testing.

(e) Late submissions

(1) Quoters are responsible for submitting quotations so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that quotations are due.

(2) Any quotation received at the Government office designated in the solicitation after the exact time specified for receipt of quotations is late and will not be considered unless it is received before purchase order issuance and the Contracting Officer determines that accepting the late quotation would not unduly delay the acquisition.

(3) If an emergency or unanticipated event interrupts normal Government processes so that quotations cannot be received at the Government office designated for receipt of quotations by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of quotations will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(f) Issuance of purchase order. Quotations should contain the quoter’s best technical and price terms. The Contracting Officer may reject any or all quotations. The Contracting Officer may issue a purchase order to other than the quoter with the lowest priced quotation. After the evaluation of quotations, the Contracting Officer may negotiate final terms with one or more quoters of the Government’s choice before issuing any purchase order. The Contracting Officer will not negotiate with any quoters other than those of the Government’s choice and will not use the formal source selection procedures described in FAR part 15.

(g) Multiple purchase orders. The Government may issue a purchase order for any item or group of items of a quotation, unless the quoter qualifies the quotation by specific limitations. Unless otherwise provided in the Schedule, quotations may not be submitted for quantities less than those specified. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit prices quoted, unless the quoter specifies otherwise in the quotation.

(h) Availability of requirements documents cited in the solicitation.

(1) (i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to- GSA Federal Supply Service Specifications Section Suite 8100 470 East L’Enfant Plaza, SW Washington, DC 20407 Telephone (202) 619-8925 Facsimile (202) 619-8978

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST (https://assist.dla.mil/online/start/).

(ii) Quick Search (http://quicksearch.dla.mil/).

(iii) ASSISTdocs.com (http://assistdocs.com).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by-

(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(i) Data Universal Numbering System (DUNS) Number. (Applies to all quotations exceeding the Micro-Purchase Threshold (MPT), and quotations of MPT or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database.) The quoter shall enter, in the block with its name and address on the cover page of its quotation, the annotation “DUNS” or “DUNS+4” followed by the DUNS or DUNS+4 number that identifies the quoter’s name and address. The DUNS+4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the quoter to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the quoter does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. A quoter within the United States may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. A quoter located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The quoter should indicate that it is a quoter for a Government contract when contacting the local Dun and Bradstreet office.

(j) [Reserved].

(k) Requests for information. The contracting officer will not notify unsuccessful quoters that responded to this solicitation. Quoters may request information on purchase order(s) resulting from this solicitation from the contracting officer.

Submission of your response shall be received not later than April 12th, 2024 @ 2:00 PM EST. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f). All offers shall be emailed to the Contract Specialist listed below no later than the date and time listed. Please ensure you title your quote with the solicitation number and name for ease of identity i.e. “36C24724Q0472: ATL Surgical Trays.

Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Point of Contact listed below.

Point of Contact Questions must be submitted NO LATER THAN April 10th, 2024 @ 12:00 P.M. EST. Questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Contract Specialist, Ashley.stewart4@va.gov. No phone call shall be accepted.

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, “Streamlined Procedures for Evaluation and Solicitation for Commercial Items,” as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested.

This solicitation is issued as a BRAND NAME OR EQUAL TO RFQ.

The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-03 effective February 23, 2024.

The associated North American Industrial Classification System (NAICS) code for this procurement is 339112 – Surgical and Medical Instrument Manufacturing with a small business size standard of 1,000 employees.

The FSC/PSC is 6515 | Medical and Surgical Instruments, Equipment, and Supplies

All interested companies shall provide quotations for the following ATL Surgical Trays.

Page 1 of

Page 1 of

Page 1 of Page 1 of

File details come from the government source that posted it. Updated .