36C10G19Q0077-004.docx

Stryker Brand Arthroscopic Shaver System: CrossFire 2 Console or Equal

This requirement will be IAW FAR clause 52.211-6, “Brand Name or Equal” which requires that the vendor indicate each product that is being offered as an “equal” product. For each equal product, the vendor must include a description reflecting the characteristics and level of quality that will satisfy the salient physical, functional, or performance characteristics of the equal product(s) specified below The vendor must clearly identify the item by brand name (if any) and make/model number. The vendor must include descriptive literature, such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the contracting officer.

VENDORS SUBMITTING AN "OR EQUAL" QUOTE MUST MEET ALL THE MINIMUM SALIENT CHARACTERISTICS LISTED BELOW.

Minimum Salient Characteristics (SC) for Literature Review

CLIN

MFG

Part Number

Description

Stryker Corporation

0475-100-000

CrossFire 2 Console

SC

SALIENT CHARACTERISTICS

METHOD OF EVALUATION

SC 1

Shall include ports for connecting handpieces

Literature Review

SC 2

Shall include controls for adjusting handpiece settings

SC 3

Shall have footswitch connectivity

SC 4

Shall display user prompts and system diagnostic text

SC 5

Shall have Forward, Reverse, and Oscillate Operational Modes

SC 6

Shall include settings for minimum and maximum blade speeds

0475-000-000

CrossFire Footswitch provides remote, foot control of the powered shave handpiece

SC 7

Must be compatible with unit in CLIN 0001. Shall allow user to activate and control the powered shaver handpiece, including modes (oscillate/forward/reverse) (fixed/variable) and direction (forward/reverse)

0375-708-500

0375-704-500

0375-701-500

0275-601-500

Formula 180 Shaver Handpiece with buttons, suction lever 180 degrees from buttons to allow for simultaneous control of buttons

Formula Handpiece (with buttons)

Formula Handpiece (without buttons) for use with foot control

Small-Joint Shaver Handpiece

SC 8

Must be compatible with unit in CLIN 0001. Shall include modes for Oscillate, Forward/Reverse, High/Low speed, Variable/Fixed. Maximum 12,000 RPM. Suction control. Shaver blade recognition.