24Q6052 SALIENT CHARACTERISTICS.pdf
PDF 63 KB Posted
- Solicitation number
- SPMYM324Q6052
About this file
This document is a combined synopsis/solicitation for the procurement of temporary test plugs from COB Industries, Inc. or an equal product by the Defense Logistics Agency Land and Maritime. The solicitation requires four different sizes of stainless steel plugs with specific salient characteristics such as a 3,000 PSI pressure rating, hydrostatically tested to 5,000 PSI, and a short profile design. The total quantity required is 19 plugs. The procurement is set aside for 100% small business and will be awarded on a lowest price technically acceptable basis. Offerors must provide descriptive literature demonstrating their product meets the salient characteristics and may be required to submit sample plugs. The solicitation closes on 9/9/2024 at 3:00 PM EST. Payment terms are net 30 days after acceptance of the material.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Clauses - Full Text Provisions and Clauses 231228.docx | DOCX document | |
| 24Q6052 RFQ Required.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIFICATIONS FOR TEMPORARY PLUGS
CLIN 0001: Temporary Test Plug COB Industries P/N DCN0.25-SS OR EQUAL per the following salient characteristics:
• ¼” External Closure
• 3K PSI
• Heavy Duty Industrial Stainless Steel
• Hydrostatically tested to 5000 PSI without failure
• Internal tapered collar system
• O-Ring Groove within female cap
• Must prevent blast grit from entering piping
• Female AN thread port on the cap face
• Short profile design
• Maximum two piece component design
• No special installation tooling
• No more than one replaceable soft goods/o-ring in component
CLIN 0002: Temporary Test Plug COB Industries P/N DCN00.50-SS OR EQUAL per the following salient characteristics:
• ½” External Closure
• 3K PSI
• Heavy Duty Industrial Stainless Steel
• Hydrostatically tested to 5000 PSI without failure
• Internal tapered collar system
• O-Ring Groove within female cap
• Must prevent blast grit from entering piping
• Female AN thread port on the cap face
• Short profile design
• Maximum two piece component design
• No special installation tooling
• No more than one replaceable soft goods/o-ring in component
CLIN 0003: Temporary Test Plug COB Industries P/N DCN0.75-SS OR EQUAL per the following salient characteristics:
• ¾” External Closure
• 3K PSI
• Heavy Duty Industrial Stainless Steel
• Hydrostatically tested to 5000 PSI without failure
• Internal tapered collar system
• O-Ring Groove within female cap
• Must prevent blast grit from entering piping
• Female AN thread port on the cap face
• Short profile design
• Maximum two piece component design
CLIN 0004: Temporary Test Plug COB Industries P/N DCN01.00-SS OR EQUAL per the following salient characteristics:
• 1.0” External Closure
• 3K PSI
• Heavy Duty Industrial Stainless Steel
• Hydrostatically tested to 5000 PSI without failure
• Internal tapered collar system
• O-Ring Groove within female cap
• Must prevent blast grit from entering piping
• Female AN thread port on the cap face
• Short profile design
• Maximum two piece component design
Vendors are required to submit descriptive literature to show how any “equal” to product meets all of the specifications above. Offerors may be asked to submit sample fittings with their offer.
File details come from the government source that posted it. Updated .