225 MP YRRP PWS.pdf

Ver. October 2022

FY 2008 National Defense Authorization Act, Public Law 110- 181, Section 582);

re how it assures itself that its work complies with the requirements of the contract. As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary. After acceptance of the QCP, the contractor changes to its QCP.

1.4.4 Quality Assurance (QA). The Government shall eval

performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government must do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality level(s) (defect rate(s)).

1.4.5 Installation Access and Security Requirements. None

1.4.6 Physical Security. The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.6.1 Key Control: None

1.4.7 Special Qualifications: None

1.4.9 Contract Manager (CM): The shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO within 3 calendar days after contract award. The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the COR, (or the KO if a COR is not assigned), to resolve issues, receive technical instructions, and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.10 Identification of Contractor Employees: All contractor personnel attending meetings, answering Government telephones, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression that they are Government employees. The contractor shall ensure that all documents or reports produced by contractor personnel are suitably marked as contractor products or that contractor participation is displayed in all correspondence types (to include signature blocks on e- mail) and dealings with Government or non-Government entities/ Contractor personnel shall wear

6Ver. October 2022

TECHNICAL EXHIBIT 2

Deliverables Schedule

PWS Reference / Deliverable Title

Frequency Number of Copies

Medium/ Format

Submit To

1.4. Quality

Control Plan

Provide within 5 calendar days after Contract Award

1 Electronic Submissio n

KO

. Post Award onference and

Minute

As schedule prior to start contract

1 Electronic Submissio n

KO 1. Contract Manager

Provide within 3 calendar days after Contract Award

1 Electronic Submissio n

CORIdentification of Contractor Personnel

At all times during event

1 Electronic Submissio n

COR.

Identification

Contract1.

Quality1.4.