PROJECT MANUAL

AND TECHNICAL SPECIFICATIONS for

Department of Enterprise Services (DES)

LCC – Renovation and Minor Improvements 1600 Maple Street, Longview WA

State Project No. 2026-014 G (1-1) by Department of Enterprise Services

Facility Professional Services

BID ISSUE – June, 2026

Approved By: _________________________________________________________ Bob Mohrbacher, President Date

Gar F Miller, AIA Date

Prepared by

Set

LCC – Renovation and Minor Improvements Section 00 0001 State Project No.2026-014 G (1-1) TABLE OF CONTENTS

SECTION 00 0001 - TABLE OF CONTENTS

Cover Sheet 00 0001 Table of Contents 00 0002 List of Drawings 00 0003 Project Directory 00 0004 Project Approvals

Division 00 - Procurement & Contracting Requirements Advertisement for Bids

Bidding Terms and Conditions

Subcontractor List Form A

Wage Theft Prevention Form

Subcontractor List Form B

DES Plan Centers

Instructions to Bidders

Supplemental Bidder Responsibility Criteria

Form 1

Form 2

Form 3

Form 4

Form 5

Form 6

General Conditions

Project Forms

Certificate of Insurance Form

Prevailing Wage Example

Pre-Bid Walk-Thru Agenda

Preconstruction Checklist

Substitution Request Form

Apprentice Utilization Plan

Change Order Form

Field Authorization Form

Request for Information Form

Notice of Non-Conformance Form

Request for Equitable Adjustment of Time Form

Certificate of Substantial Completion

Final Acceptance Checklist

Contractor Invoice Form

Division 01 – General Requirements

Section 01 1000 Summary

Section 01 2000 Price and Payment Procedures

Section 01 2050 Contract Modification Procedures Section 01 2300 Alternates

Section 01 2500 Substitution Procedures Section 01 3000 Administrative Requirements

Section 01 3216 Construction Progress Schedule

Section 01 4000 Quality Requirements

Section 01 4216 Definitions

Section 01 5000 Temporary Facilities and Controls

Section 01 6000 Product Requirements

Section 01 7000 Execution Requirements

Section 01 7419 Construction Waste Management and Disposal

Section 01 7800 Closeout Submittals and Procedures

Section 01 1101 Summary of Hazardous Materials Work

FACILITY CONSTRUCTION SUBGROUP

Division 02 – Existing Conditions Section 02 2110 Photographs Section 02 4119 Selective Building Demolition

Division 03 – Concrete Not Used

Division 04 – Masonry Not Used

Division 05 – Metals Not Used

Division 06 – Woods, Plastics and Composites Section 06 1000 Rough Carpentry Section 06 1600 Sheathing

Division 07 – Thermal and Moisture Protection Section 07 4646 Fiber Cement Siding Section 07 5323 EPDM Membrane Roofing Section 07 6200 Sheet Metal Flashing and Trim Section 07 9000 Joint Protection

Division 08 – Openings Section 08 1713 Integrated Door Assemblies

Division 09 – Finishes Section 09 2116 Gypsum Board Section 09 6500 Resilient Base and Accessories Section 09 6813 Tile Carpeting Section 09 9100 Painting and Coating

Division 10 – Specialties Section 10 2600 Wall Protection

DIVISION 11 – Equipment Not Used

DIVISION 12 – Furnishings Not Used

FACILIITY SERVICES SUBGROUP

DIVISION 23 - Heating, Ventilating, and Air-Conditioning (HVAC) Section 23 0000 Heating, Ventilating and Air Conditioning (HVAC) Basic Requirements Section 23 0523 General-Duty Valves for HVAC Piping Section 23 0529 Hangers and Supports for HVAC Piping, Ductwork and Equipment Section 23 0553 Identification for HVAC Piping, Ductwork and Equipment Section 23 0593 Testing, Adjusting, and Balancing for HVAC Section 23 0700 HVAC Insulation Section 23 1123 Facility Fuel - Natural Gas Piping and Systems Section 23 2113 HVAC Piping Section 23 2116 Hydronic Piping Specialties Section 23 3100 HVAC Ducts and Casings Section 23 3300 Air Duct Accessories Section 23 5200 Heating Boilers Section 23 7400 Rooftop Packaged Air Conditioning Units Section 23 8200 Terminal Heat Transfer Equipment

DIVISION 26 - Electrical Section 26 0000 Electrical Basic Requirements Section 26 0509 Equipment Wiring Section 26 0519 Low-Voltage Electrical Power Conductors and Cables Section 26 0526 Grounding and Bonding for Electrical Systems Section 26 0529 Hangers and Supports for Electrical Systems and Equipment Section 26 0533 Raceways Section 26 0534 Boxes Section 26 0553 Identification for Electrical Systems Section 26 2100 MEDIUM VOLTAGE TRANSFORMERS Section 26 2416 Panelboards Section 26 2816 Enclosed Switches and Circuit Breakers

DIVISION 28 - Electronic Safety and Security Section 28 0001 Electronic Safety Basic Requirements Section 28 4600 Fire Detection and Alarm

APPENDIX 1

END OF TABLE OF CONTENTS

LCC - Renovation & Minor Improvements Section 00 0002 State Project No. 2026-014 G (1-1) LIST OF DRAWINGS

List of Drawings – Exhibit B 00 0115 - 1

SECTION 00 0002 - LIST OF DRAWINGS

PART 1 GENERAL

The following is a list of drawings mentioned in the contract documents, and the same are hereby made part of the Contract.

LCC - Renovation & Minor Improvements Section 00 0003 State Project No. 2026-014 G (1-1) PROJECT DIRECTORY

Project Directory - 1

SECTION 00 0003 – PROJECT DIRECTORY

USING AGENCY

LOWER COLUMBIA COLLEGE

1600 MAPLE STREET

LONGVIEW, WA 98632

(360) 442-2201

CONTACT: NOLAN WHEELER

EMAIL: NWHEELER@LCC.CTC.EDU

OWNER REPRESENTATIVE

WASHINGTON STATE

DEPARTMENT OF ENTERPRISE SERVICES

FACILITY PROFESSIONAL SERVICES

PO BOX 41476, OLYMPIA, WA 98504-1476

CONTACT: WILLIAM YARBROUGH PM

PH. 360-491-9487

EMAIL: WILLIAM.YARBROUGH@DES.WA.GOV

ARCHITECT

MSGS CARVE ARCHITECTS

510 CAPITOL WAY SOUTH

OLYMPIA, WA 98501

(360) 970-4412

CONTACT: GARNER MILLER, AIA

EMAIL: GARNERM@CARVEARCH.COM

CONTACT: MICHAEL KERSHISNIK, AIA

EMAIL: MICHAEL@CARVEARCH.COM

CIVIL ENGINEER

KPFF CONSULTING ENGINEERS

111 SW FIFTH AVENUE, SUITE 2600

PORTLAND, OREGON 97204

(503) 542-3872

CONTACT: ANDREW CHUNG

EMAIL: ANDREW.CHUNG@KPFF.COM

MECHANICAL/PLUMBING/ELECTRICAL

ENGINEER:

INTERFACE ENGINEERING

1000 SW MAIN STREET, SUITE 1600

PORTLAND, OREGON 97204

(503) 382-2667

CONTACT: RICK SILENZI, PE

EMAIL: RICKSI@INTERFACEENG.COM

mailto:NWHEELER@LCC.CTC.EDU mailto:william.yarbrough@des.wa.gov mailto:MICHAEL@CARVEARCH.COM mailto:ANDREW.CHUNG@KPFF.COM

LCC - Renovation & Minor Improvements Section 00 0003 State Project No. 2026-014 G (1-1) PROJECT DIRECTORY

Project Directory - 2

LCC • Renovation & Minor Improvements State Project No.2026-014 G (1-1)

Section 00 0004

PROJECT APPROVALS

SECTION 00 0004 -PROJECT APPROVALS

For

Department of Enterprise Services (DES)

LCC - Renovation & Minor Improvements

Approved By:

Approved By:

Approved By:

1500 Maple Street, Longview WA 98632 )) J f.°{J,,o. 2026-014 G (1-1)

Nolan K Wheeler Vice President of Administration Lower Columbia College

William Yarbrough, Project Manager

Facility Professional Services

Department of Enterprise Services

Date

Nancy Deakins, Assistant Program Manager Date

Facility Professional Services

Department of Enterprise Services

Date

The technical material and data contained in the Specifications in this document and included on the Drawings were prepared under the supervision and direction of the undersigned, whose seal, as an architect or professional engineer licensed to practice as such, is affixed below.

: m, REGISTERED

·. · , 1)llJ:_

/ �ER F. MJLLER

'-rs(t:�I

WASHINGTON

Garner Miller, AIA, Principal

MSGS I CARVE Architects

April 27, 2026

Date

05/14/2026

5/18/2026

ADVERTISEMENT FOR BIDS

Sealed bids will be accepted for the following project:

PROJECT NO.: 2026-014 G (1-1)

TITLE: LCC - Renovation & Minor Improvements

AGENCY: FPS for Lower Columbia College

PROJECT MANAGER: William V. Yarbrough III

ESTIMATED BID COST RANGE: $1,200,000.00 to $1,400,000.00

SUBMITTAL

TIME/DATE/LOCATION:

No later than 1:00 PM, Tuesday, June 23, 2026.

Submit Online at DES Public Procurement Portal:

https://deswa.bonfirehub.com.

(See additional information below)

Bids should be submitted no later than 1:00 PM for the

Virtual Public Bid Opening on Microsoft Teams which will be held at approximately 1:30 PM on

Tuesday, June 23, 2026

Join on your computer, mobile app or room device

Click here to join the meeting

Meeting ID: 232 943 171 100

Passcode: WPJKXj

Download Teams | Join on the web

Or call in (audio only)

+1 564-999-2000,,994059963# United States, Olympia

(833) 322-1218,,994059963# United States (Toll-free)

Phone Conference ID: 994 059 963#

Find a local number | Reset PIN (See additional information below)

SUBCONTRACTOR LISTINGS: For bid proposals $1M or more, each bidder shall submit:

*NEW LAW* (Effective July 27, 2025) for Form A:

https://deswa.bonfirehub.com/ https://teams.microsoft.com/l/meetup-join/19%3ameeting_N2JjZDU0NGUtZmM3NC00OTlhLWE2NWQtOTViYzNiMjg1OTk0%40thread.v2/0?context=%7b%22Tid%22%3a%2211d0e217-264e-400a-8ba0-57dcc127d72d%22%2c%22Oid%22%3a%228276b297-0ea1-4aca-beed-94bf985ec531%22%7d https://www.microsoft.com/en-us/microsoft-teams/download-app https://www.microsoft.com/microsoft-teams/join-a-meeting tel:+15649992000,,994059963# tel:8333221218,,994059963# https://dialin.teams.microsoft.com/811a9140-4f87-4b3b-b4e5-c0df12d33f3f?id=994059963 https://dialin.teams.microsoft.com/usp/pstnconferencing

ADVERTISEMENT Page 2 of 4 Effective December 5, 2025

(Updated January 30, 2026)

Form A (plumbing, electrical, and HVAC), due with bid proposal AT TIME OF BID SUBMITTAL. Form

A will not be accepted after the bid submittal deadline and will render the bid nonresponsive and therefore

VOID.

Form B (Structural Steel Install, Rebar Install) within 48 hours after the bid submittal time/date.

Form B must be emailed to:

FPSsubcontractorlist@des.wa.gov

ISSUED BY: Department of Enterprise Services

PRE-BID WALK-THROUGH:

1:00 P.M. on Thursday, June 4, 2026 at Lower

Columbia College, Heritage Room, 1600 Maple St, Longview, WA 98632..

For specific directions for an on-site pre-bid meeting or site visit, please contact the Consultant listed below.

All Public Works Bid Openings will be conducted via live stream on Microsoft Teams. A link to the live stream for bid opening can be found above. We will strive to begin bid opening live streams within thirty minutes of the bid closing and appreciate your patience as we deploy this new process.

If you have questions, please contact the Project Manager, William V. Yarbrough III at william.yarbrough@des.wa.gov or (360) 490-9487.

This link provides support with the Euna Procurement Vendor processes and help:

https://customer.eunasolutions.com/public/s/. Visit site for help and details.

DES Public Procurement Portal is the official platform for accessing plans, specifications and detailed submissions for DES Public Works Projects. These documents can be obtained through the

DES Public Procurement Portal https://deswa.bonfirehub.com. Contractors may also obtain plans and specifications from the Plan Centers listed below, or msgsCARVE Architects, Attn: Garner

Miller, 510 Capitol Way South, Olympia, WA 98501, (360) 970-4412, garnerm@carvearch.com upon deposit of $100.00. Please make checks payable to msgsCARVE Architects. Plans must be returned in good condition within seven (7) days following bid date to obtain a refund of deposit.

After seven days no refunds will be made.

List of plan centers: Abadan Reprographics & Imaging, Spokane, WA; ARC Document Solutions, Seattle, WA; ARC Document Solutions, Tacoma, WA; Associated Builders & Contractors, Spokane, WA; Associated General Contractors, Boise, ID; Builder’s Exchange of Washington, Everett, WA; Daily Journal of Commerce Plan Center, Portland, OR; Daily Journal of Commerce, Seattle, WA; Hermiston Plan Center, Hermiston, OR; Contractor Plan Center, Milwaukie, OR;

mailto:FPSsubcontractorlist@des.wa.gov william.yarbrough@des.wa.gov https://gcc02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fcustomer-success-links.totango.co%2Fss%2Fc%2Fu001.TEy9vfb3GYVWunjhizp7VGjZ-g44dT_GKOYTPTwI96tVKi_fnbX9vgesvWWVm1KX1eC8pK8dZheL2wi58_kW0w%2F4hh%2FyRW2YWBVR9KTRjjxMMvc8g%2Fh0%2Fh001.CDUxsV3RMP1QHveeJKaYopDffmCQca5yzaXFGPKUA-0&data=05%7C02%7Calissa.north%40des.wa.gov%7C28201d05d299489392ba08ddaf32780f%7C11d0e217264e400a8ba057dcc127d72d%7C0%7C0%7C638859353482580698%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=GkNL9yaDaYh%2Bbuu4E1HA4DCFuWYmuoWH3EF8NRslFPs%3D&reserved=0 https://deswa.bonfirehub.com/ mailto:garnerm@carvearch.com

ADVERTISEMENT Page 3 of 4 Effective December 5, 2025

Ridgeline Graphics (Wenatchee Plan Center), Wenatchee, WA; Spokane Regional Plan Center, Spokane, WA; Tri-City Construction Council, Kennewick, WA; Walla Walla Valley Plan Center, Walla Walla, WA; Weekly Construction Reporter, Bellingham, WA; Yakima Plan Center, Yakima, WA.

Please direct questions regarding this project through the DES Public Procurement Portal https://deswa.bonfirehub.com. Or to the office of the Consultant, msgsCARVE Architects, Attn:

Garner Miller, (360) 970-4412, garnerm@carvearch.com.

Bid Results will be available on the DES Public Procurement Portal: https://deswa.bonfirehub.com following the bid opening.

The State of Washington prevailing wage rates are applicable for this public works project located in Cowlitz County. Bidders are responsible to verify and use the most recent prevailing wage rates.

The “Effective Date” for this project is the bid submittal time and date above. The applicable prevailing wage rates may be found on the Department of Labor & Industries website located at https://secure.lni.wa.gov/wagelookup/.

Mandatory 15% apprentice labor hours of the total labor hours are a requirement of the construction contract. Voluntary workforce diversity goals for this apprentice participation are identified in the

Instructions to Bidders and the General Conditions for Washington State Facility Construction.

Bidders may contact the Department of Labor & Industries, Apprenticeship Section, to obtain information on available apprenticeship programs.

In accordance with RCW 39.30.060, the Bidder is required to provide the names and license numbers of the Subcontractors with whom the Bidder will directly subcontract for the performance of heating, ventilation and air conditioning (HVAC), plumbing and electrical for this project on

Subcontractor List Form A. New law, effective July 27, 2025, Form A must be submitted at time of bid to the DES Public Procurement Portal https://deswa.bonfirehub.com along with bid submission. Form B: The Bidder shall also provide names of the Subcontractors with whom the

Bidder will subcontract for structural steel installation and rebar installation on Subcontractor List

Form B within 48 hours of the bid submittal time via email to FPSsubcontractorlist@des.wa.gov.

Supplemental Bidder Responsibility will be evaluated for this project. In determining Bidder responsibility, the Owner shall consider an overall accounting of the criteria set forth in “DIVISION

00 SUPPLEMENTAL RESPONSIBILITY CRITERIA”. Please direct questions regarding this subject to the office of the Consultant.

The successful Bidder is required to register and create an account in the DES Diversity Compliance program (B2Gnow) at https://des.diversitycompliance.com. Voluntary numerical Diverse Business goals of 10% MBE, 6% WBE, 5% SBE or PWSBE, and 5% Veterans have been established for this project. Achievement of the goals is encouraged.

garnerm@carvearch.com https://deswa.bonfirehub.com/ https://secure.lni.wa.gov/wagelookup/ https://deswa.bonfirehub.com/ https://des.diversitycompliance.com/

ADVERTISEMENT Page 4 of 4 Effective December 5, 2025

Bidders may contact the Office of Minority and Women's Business Enterprise (OMWBE) at http://OMWBE.wa.gov/ to obtain information on certified firms. Bidders may also utilize

Washington Small Businesses registered in B2Gnow at DES diversity compliance program

B2Gnow and Veteran-owned Businesses at https://www.dva.wa.gov/veterans-their-families/veteran-owned-businesses/vob-search.

The State reserves the right to accept or reject any or all bids and to waive informalities.

STATE OF WASHINGTON

DEPARTMENT OF ENTERPRISE SERVICES

FACILITY PROFESSIONAL SERVICES

2026014Gadvlh http://omwbe.wa.gov/ https://des.diversitycompliance.com/ https://des.diversitycompliance.com/ https://www.dva.wa.gov/veterans-their-families/veteran-owned-businesses/vob-search https://www.dva.wa.gov/veterans-their-families/veteran-owned-businesses/vob-search

Project Name: LCC – Renovation and Minor Improvements Project No.: 2026-014 G(1-1)

Contractor Name:

BIDDING TERMS AND CONDITIONS Page 1 of 4 Effective May 1,2026

STATE OF WASHINGTON DEPARTMENT OF ENTERPRISE SERVICES

B I D D I N G T E R M S A N D C O N D I T I O N S

BID SUBMISSIONS

Bids submitted in compliance with the contract documents.

1) BASE BID AND ALTERNATES (including Trench Excavation Safety Provisions) will be submitted by the Bidder through the DES Public Procurement Portal

• Do not include Washington State Sales Tax

If the bid amount contains any work which requires trenching exceeding a depth of four feet, all costs for trench safety shall be included in the Base Bid for adequate trench safety systems in compliance with Chapter 39.04 RCW. 49.17 RCW and WAC 296-155-650. Bidder must include a lump sum dollar amount (even if the value is $0.00) to be responsive.

2) BID ALTERNATES DESCRIPTION (if applicable)

• A/E Must specify whether additive or deductive

• Do not include Washington State Sales Tax

(1) ADDITIVE: Exterior painting, siding replacement, sheetmetal coping replacement as shown on sheets A221P, A301P, A302P, and A601P.

The Owner reserves the right to accept or reject any or all bid prices within sixty (60) days of the bid date.

In compliance with the contract documents, the below bidding terms and conditions apply:

TIME FOR COMPLETION

Contract Time – The undersigned hereby agrees to Substantially Complete all the work under the Base Bid (and accepted Alternates) within 270 calendar days after the date of Notice to Proceed.

Final Completion – All the Work shall be fully and finally completed in accordance with the contract documents within 30 calendar days after the date of Substantial Completion.

BIDDING TERMS AND CONDITIONS Page 2 of 4 Effective May 1,2026

SUBCONTRACTOR LISTING REQUIREMENTS

In accordance with RCW 39.30.060, bidders must submit both Subcontractor Listing Forms A and B for all bids, regardless of subcontracting for the listed work, and must provide the names and license numbers of all subcontractors, if any, to be used for the work.

• Form A: (HVAC, Plumbing and Electrical) must be submitted at TIME OF BID to the DES Public Procurement Portal https://deswa.bonfirehub.com with bid submission; late submission will render the bid non-responsive. Failure to submit Form A with the bid will render the bid non-responsive.

• Form B: (Structural Steel Installation and Rebar Installation) must be submitted no later than forty-eight (48) hours after bid deadline via email to FPSsubcontractorlist@des.wa.gov. (Or may be submitted with the bid submittal through the Procurement Portal https://deswa.bonfirehub.com.) Failure to submit Form B will render the bid non-responsive.

APPRENTICE UTILIZATION REQUIREMENTS

The apprentice labor hours required for this project are 15% of the total labor hours. The undersigned agrees to utilize this level of apprentice participation. A monetary incentive of $1,000 will be paid to the contractor meeting the apprentice utilization requirement. A monetary penalty will be applied to the contractor failing to meet the utilization requirement and failing to demonstrate a Good Faith Effort. The penalty will be applied to every hour of short-fall of the minimum number of required apprentice hours using the applicable published wage of a Step 1 apprentice laborer. The penalty will not exceed five percent (5%) of the total Contract Sum. The cost value associated with meeting the apprentice utilization requirement is included in the Base Bid.

FEDERAL AND STATE REQUIREMENTS

The undersigned agrees to perform the requirements set out and incorporated by reference in attached “DIVISION 00 SPECIAL CONDITIONS” section in the specifications, if applicable.

LIQUIDATED DAMAGES

The undersigned agrees to pay the Owner as liquidated damages the sum of $500 for each consecutive calendar day that is in default after the Contract Time. Liquidated damages shall be deducted from the contract invoice after taxes and retainage.

BIDDING TERMS AND CONDITIONS Page 3 of 4 Effective May 1,2026

WAGE THEFT PREVENTION – RESPONSIBLE BIDDER CRITERIA

WASHINGTON STATE PUBLIC WORKS CONTRACTS

Return this signed “Contractor Certification” with your signed Bid Form or within two

(2) business days of request by Owner.

Prior to awarding a public works contract, the Washington State Department of Enterprise Services is required to determine that a bidder meets the responsibility criteria to be considered a ‘responsible bidder’ and is qualified to be awarded a public works project. See RCW 39.04.350(1)(g) & (2). Pursuant to legislative enactment in 2017, the responsibility criteria include a contractor certification that the contractor has not willfully violated Washington’s wage laws. See Chap. 258, 2017 Laws (enacting SSB 5301).

Project No.: 2026-014 G(1-1)

Project Name: LCC - Renovation and Minor Improvements

Procurement Solicitation Date: Tuesday, May 26, 2026

I hereby certify, on behalf of the firm identified below, as follows (check one):

NO WAGE VIOLATIONS. This firm has NOT been determined by a final and binding citation and notice of assessment issued by the Washington Department of Labor and Industries or through a civil judgment entered by a court of limited or general jurisdiction to have willfully violated, as defined in RCW 49.48.082, any provision of RCW chapters 49.46, 49.48, or 49.52 within three (3) years prior to the date of the above-referenced procurement solicitation date.

VIOLATIONS OF WAGE LAWS. This firm has been determined by a final and binding citation and notice of assessment issued by the Washington Department of Labor and Industries or through a civil judgment entered by a court of limited or general jurisdiction to have willfully violated, as defined in RCW 49.48.082, a provision of RCW chapters 49.46, 49.48, or 49.52 within three (3) years prior to the date of the above-referenced procurement solicitation date.

I hereby certify, under penalty of perjury under the laws of the State of Washington, that the certifications herein are true and correct and that I am authorized to make these certifications on behalf of the firm listed herein.

Firm Name:_________________________________________________________________

Name of Contractor/Bidder – Print full legal entity name of firm

By:____________________________ Signature of authorized person

Title:___________________________ Title of person signing certificate

Date:___________________________

Print Name of person making certifications for firm

Place:___________________________________

Print city and state where signed

BIDDING TERMS AND CONDITIONS Page 4 of 4 Effective May 1,2026

STATE OF WASHINGTON DEPARTMENT OF ENTERPRISE SERVICES

SUBCONTRACTOR LIST FORM A

FOR HVAC, PLUMBING, AND ELECTRICAL

Required at time of bid submittal to Procurement Portal https://deswa.bonfirehub.com.

In compliance with the contract documents, the following subcontractor list is submitted:

SUBCONTRACTOR LISTING – RCW 39.30.060

The Bidder shall provide names and license numbers of the subcontractors with whom the Bidder will directly subcontract for performance of the following work. If the Bidder intends to perform the work, the Bidder must enter its name for that category of work.

The Bidder shall not list more than one subcontractor for each category of work identified UNLESS subcontractors vary with bid alternates, in which case the Bidder must indicate which subcontractor will be used for which alternate. Substitutions are prohibited except as outlined in RCW 39.30.060.

Failure to submit this form will render the bid non-responsive.

For any listed category not included in the project, the bidder may mark 'Not Applicable' or N/A' or leave that category blank, provided the form is signed.

Bidders who name themselves to perform the work are expected to perform the work and the Department of Enterprise Services reserves has the right to reject substitution of the bidder with a subcontractor unless the bidder demonstrates a change in circumstances from the time of bid submission that is outside of the control of the bidder.

Category of Work Alternate Bid# (if applicable)

Firm Name License Number (Contractor Registration No.)

1. HVAC, Base Bid n/a

a. HVAC, Alternate Bid

2. Plumbing, Base Bid n/a

a. Plumbing, Alternate Bid

3. Electrical, Base Bid n/a

a. Electrical, Alternate Bid

Bidder may attach a separate sheet for additional alternate bid subcontractors.

Submitted By: __________________________________________________ Print Name and Title of Authorized Person

LCC Renovation and Minor Improvements Project No.: 2026-014 G (1-1)

SUBCONTRACTOR LIST FORM B Effective June 12, 2024

STATE OF WASHINGTON

DEPARTMENT OF ENTERPRISE SERVICES

Within 48 Hours of Bid Submittal Time

Email FORM B as an attachment to: FPSsubcontractorlist@des.wa.gov

Subject line on email shall include: Project No., Project Name, Contractor Name, Form B

In compliance with the contract documents, the following subcontractor list is submitted:

SUBCONTRACTOR LISTING – RCW 39.30.060

The Bidder shall provide names of the subcontractors with whom the Bidder will directly subcontract for performance of the following work. If the Bidder intends to perform the work, the Bidder must enter its name for that category of work.

The Bidder shall not list more than one subcontractor for each category of work identified UNLESS subcontractors vary with bid alternates, in which case the Bidder must indicate which subcontractor will be used for which alternate. Substitutions are prohibited except as outlined in

RCW 39.30.060.

Failure of the Bidder to submit the NAMES of such subcontractors or to name itself to perform such work may render the Bidder’s bid nonresponsive and, therefore, VOID.

Bidders who name themselves to perform the work are expected to perform the work and the Department of Enterprise Services reserves the right to reject substitution of the bidder with a subcontractor unless the bidder demonstrates a change in circumstances from the time of bid submission that is outside of the control of the bidder.

Category of Work Alternate Bid # (if applicable)

Firm Name

1. Structural Steel Installation, Base Bid n/a

a. Structural Steel Installation, Alternate Bid

2. Rebar Installation, Base Bid n/a

a. Rebar Installation, Alternate Bid

Bidder may attach a separate sheet for additional alternate bid subcontractors.

Submitted By: __________________________________________________ Print Name and Title of Authorized Person

Subcontractor List Form B

For Structural Steel Installation and Rebar Installation

Plan Center List

Abadan Reprographics & Imaging 603 E. 2nd Ave.

Spokane, WA 99202 www.abadanplancenter.com www.abadanplanroom.com

(509) 747-2964 planroom@abadanplancenter.com repro@abadanspokane.com

Daily Journal of Commerce Plan Center 921 SW Washington Street, Suite 210 Portland, OR 97205-2810 www.djcoregon.com;

(503) 274-0624, fax (503) 802-7239 plancenter@djcoregon.com

Tri-City Construction Council 20 E Kennewick Avenue Kennewick, WA 99336-3756 www.tricityplancenter.com

(509) 582-7424, fax (509) 582-6815 bidinfo@tcplancenter.com

ARC Document Solutions 632 Broadway Tacoma, WA 98402

(253) 383-6363 www.e-arc.com/location/tacoma/ Tacoma.bidservices@e-arc.com

Daily Journal of Commerce – Seattle 83 Columbia Street, Suite 200 Seattle, WA 98104-1482 www.djc.com

(206) 622-8272, fax (206) 622-7086 plans@djc.com

Walla Walla Valley Plan Center 29 E Sumach Street Walla Walla, WA 99362-0230 www.tricityplancenter.com

(509) 525-0850, fax (509) 522-2038 trichards@wwvchamber.com

ARC Document Solutions 2730 Occidental Avenue S Seattle, WA 98134

(206) 622-6000 www.e-arc.com/location/seattle/ seattle.bid.services@e-arc.com

Hermiston Plan Center

1565 N 1st Street, Suite 8A Hermiston, OR 97838-1368 www.hermistonplancenter.com

(541) 564-0420, fax (541) 564-0396 office@hermistonplancenter.com

Weekly Construction Reporter 2215 Midway Lane, Suite 208 Bellingham, WA 98226-1219 www.wcrinc.com

(360) 738-0370, fax (360) 738-0371 info@wcrinc.com

Associated Builders & Contractors 1760 E. Trent Ave. Spokane, WA 99202 http://www.ipcabc.org/

(509) 534-0826, fax (509) 535-9967 abcplancenter@ipcabc.org

Plan Center NW, Inc.

P.O. Box 2486 Clackamas, OR 97015 www.plancenternw.com

(503) 650-0148 brie@plancenternw.com

Yakima Plan Center 1212 N 16th Avenue, Suite 2 Yakima, WA 98902-1348 www.yakmaplancenter.com

(509) 457-4271, fax (509) 457-0775 jacki@yakimaplancenter.com

Associated General Contractors - Idaho

1649 W Shoreline Dr. Suite 100

Boise, ID 83702 http://www.idahoagc.org/ 208-344-2531, fax (208) 772-6472 planroom@idahoagc.org

Ridgeline Graphics (Wenatchee Plan Center) 962 Valley Mall Pkwy East Wenatchee, WA 98802 www.wenatcheeplancenter.com

(509) 662-6858 ext. 123, fax (509) 663-8530 plancenter@ridgelinegraphics.com mercedes@ridgelinegraphics.com

MBE, WBE or SBE owned plan center

Builders Exchange of Washington 2607 Wetmore Avenue Everett, WA 98201-2926 http://www.bxwa.com/

(425) 258-1303, fax (425) 259-3832 production@bxwa.com

Spokane Regional Plan Center 209 N Havana Street Spokane, WA 99202-4723 www.plancenter.net

(509) 328-9600, fax (509) 328-7279 projectinfo@plancenter.net

Document updated: 12-16-25 http://www.abadanplancenter.com/ http://www.abadanplanroom.com/ mailto:planroom@abadanplancenter.com mailto:repro@abadanspokane.com http://www.djcoregon.com/ mailto:plancenter@djcoregon.com http://www.tricityplancenter.com/ mailto:bidinfo@tcplancenter.com http://www.e-arc.com/location/tacoma/ mailto:Tacoma.bidservices@e-arc.com http://www.djc.com/ mailto:plans@djc.com http://www.tricityplancenter.com/ mailto:trichards@wwvchamber.com http://www.e-arc.com/location/seattle/ mailto:seattle.bid.services@e-arc.com http://www.hermistonplancenter.com/ mailto:office@hermistonplancenter.com https://www.wcrinc.com/ https://www.wcrinc.com/ mailto:info@wcrinc.com http://www.ipcabc.org/ mailto:abcplancenter@ipcabc.org http://www.plancenternw.com/ mailto:brie@plancenternw.com http://www.yakmaplancenter.com/ mailto:jacki@yakimaplancenter.com http://www.idahoagc.org/ mailto:kwatson@idahoagc.org http://www.wenatcheeplancenter.com/ mailto:plancenter@ridgelinegraphics.com mailto:mercedes@ridgelinegraphics.com http://www.bxwa.com/ mailto:production@bxwa.com http://www.plancenter.net/ mailto:projectinfo@plancenter.net

INSTRUCTIONS TO BIDDERS Effective May 1, 2026

Post Office Box 41476 Olympia, Washington 98504-1476

(360) 902-7272

Instructions to Bidders Effective: May 1, 2026

For Washington State Facility Construction and Small Works

Approved by: _____________________

Kimberly Sockle, Assistant Director

INSTRUCTIONS TO BIDDERS

FOR WASHINGTON STATE FACILITY CONSTRUCTION AND SMALL WORKS

PART 0 – GENERAL CONDITIONS

0.00 EXPLANATION TO PROSPECTIVE BIDDERS

A. In accordance with RCW 39.04.380 effective March 30, 2012, the State of Washington is enforcing a Reciprocal Preference for Resident Contractors. Any public works bid received from a nonresident contractor from a state that provides an in-state percentage bidding preference, a comparable percentage disadvantage must be applied to the bid of that nonresident contractor.

A nonresident contractor from a state that provides a percentage bid preference means a contractor that:

1. Is from a state that provides a percentage bid preference to its resident contractors bidding on public works contracts.

2. At the time of bidding on a public works project, does not have a physical office located in

Washington.

The state of residence for a nonresident contractor is the state in which the contractor was incorporated or, if not a corporation, the state where the contractor's business entity was formed.

All nonresident contractors will be evaluated for out-of-state Bidder preference. If the state of the nonresident contractor provides an in-state contractor preference, a comparable percentage disadvantage will be applied to their bid prior to contract award.

This section does not apply to public works procured pursuant to RCW 39.04.155, 39.04.280, or any other procurement exempt from competitive bidding.

B. Any prospective Bidder desiring an explanation or interpretation of the solicitation, drawings, specifications, etc., must submit a request in writing to the Architect/Engineer (A/E) eight (8) business days before the bid due date or by logging into the DES Public Procurement Portal (https://deswa.bonfirehub.com) and submitting a vendor discussion. Oral explanations or instructions given before the award of a contract will not be binding. Any information given a prospective Bidder concerning a solicitation will be furnished promptly to all other prospective Bidders by addendum to the solicitation if that information is necessary in submitting bids or if the lack of it would be prejudicial to other prospective Bidders.

C. In accordance with the legislative findings and policies set forth in RCW 39.19 the State of

Washington encourages participation in all of its contracts by MWBE firms certified by the Office of Minority and Women’s Business Enterprises (OMWBE). Participation may be either on a direct basis in response to this invitation or as a subcontractor to a Bidder. However, unless required by federal statutes, regulations, grants, or contract terms referenced in the contract documents, no preference will be included in the evaluation of bids, no minimum level of MWBE participation shall be required as a condition for receiving an award, and bids will not be rejected or considered non-responsive on that basis. Any affirmative action requirements set forth in federal regulations or statutes included or referenced in the contract documents will apply.

D. The State of Washington encourages participation in all of its contracts by Veteran-owned businesses (defined in RCW 43.60A.010) and located at:

http://www.dva.wa.gov/program/certified-veteran-and-servicemember-owned-businesses and Small, Mini and Micro businesses (defined in RCW 39.26.010) which have registered in WEBS at https://pr-webs-vendor.des.wa.gov/ and DES diversity compliance program B2Gnow.

1. In order to report payment detail, the Contractor must create an account in the DES Public https://deswa.bonfirehub.com/ http://www.dva.wa.gov/program/certified-veteran-and-servicemember-owned-businesses https://pr-webs-vendor.des.wa.gov/ https://des.diversitycompliance.com/

Works Diversity Tracking & Management System powered by B2GNow or verify if an account has already been created on behalf of the Contractor: https://des.diversitycompliance.com.

The DES Public Works Diversity Tracking & Management System is designed to streamline and automate compliance reporting requirements, empowering vendors to maintain accurate contact information and submit contract payment details online.

2. For account login or account creation details, go to the DES Public Works Diversity Tracking

& Management System home page by clicking on the URL listed above and clicking on Information for Vendors.

3. Every month for the duration of the contract, and while the contract is active in the DES Public

Works Diversity Tracking & Management System, submit and accurately maintain the following payment information through the DES Public Works Diversity Tracking & Management System:

(a) Payments received by the prime contractor from the Agency.

(b) Payments paid to each first tier subcontractor.

(c) Payments paid to each first tier supplier.

4. The Contractor must also ensure the following information is reported in the DES Public Works

Diversity Tracking & Management System by first tier subcontractors and suppliers for the duration of the contract:

(a) Confirmation of payments from the prime contractor to the subcontractor.

(b) Payment reporting to each supplier.

E. In accordance with RCW 39.04.320, for all public works estimated to cost one million dollars or more, the State of Washington requires no less than 15% of the labor hours be performed by apprentices, unless otherwise stated in the bid advertisement or on the Submittal Questionnaire/Bidding Terms and Conditions. A contractor or subcontractor may not be required to exceed the 15% requirement. On applicable projects, the Bidder shall establish in the DES

Public Procurement Portal and the Submittal Questionnaire/Bidding Terms and Conditions a minimum required percentage of apprentice labor hours compared to the total labor hours. The project’s apprenticeship utilization rate is calculated using the approved affidavits from the L&I portal.

Apprenticeship Requirements are not required for Small Works Projects estimated under $350K.

1. Incentives - The Contractor who meets or exceeds this utilization requirement on eligible contracts, will be awarded a monetary incentive described in the Apprentice Utilization Requirements of section 10.12 of the General Conditions.

2. Penalties - The Contractor who fails to meet the utilization requirement and fails to demonstrate a Good Faith Effort, as outlined below, is subject to penalties described in the Apprentice Utilization Requirements section in section 10.12 of the General Conditions.

Contractor will receive an invoice payable to the Owner within 30 days. The contractor will have 30 days to pay the penalty invoice at the time of receipt before the penalty is considered outstanding. Contractors with outstanding apprenticeship penalties may be considered non-responsive.

3. Cost Value - The expected cost value associated with meeting the goal is included in the

Base Bid as described in section 10.12 of the General Conditions.

4. Utilization Plan - The Contractor shall provide an Apprentice Utilization Plan (Plan) demonstrating how and when they intend to achieve the Apprenticeship Utilization Requirement. The Plan shall have enough information to track the Contractor’s progress in meeting the utilization requirement. The Contractor shall submit the Plan on the Apprentice Utilization Plan template (on the DES Public Works Forms website) within 10 business days of Notice to Proceed of the contract and prior to submitting the first invoice. The Contractor shall provide an updated Plan during the course of construction when there are significant changes to the Plan which may affect their ability to meet the requirement.

(a) The Plan shall be uploaded to the Department of Labor & Industries’ (L&I)

Prevailing Wage Intents and Affidavit (PWIA) system on L&I’s website.

(b) The Plan is not submitted for approval.

(c) It is expected that the Contractor will actively seek out opportunities to meet the

Apprentice Utilization Requirement during construction even if the Plan indicates a shortfall in meeting the requirement.

(d) If the Plan indicates that the Contractor will not attain the Apprentice Utilization

Requirement, then Contractor must submit “Good Faith Effort” (GFE) documentation with their Plan to L&I’s PWIA system.

5. Good Faith Effort (GFE)

(a) Good Faith Effort (GFE) documentation shall describe in detail why the Contractor is not or was not able to attain the Apprentice Utilization Requirement.

1. Contractors may submit Good Faith Effort (GFE) documentation at any time during the construction.

2. All GFE documentation must be submitted no later than 30 days before substantial completion.

(b) Good Faith Effort (GFE) documentation must be in signed letter format uploaded to the

PWIA system and include:

1. The contract number, title, and the apprentice utilization requirements.

2. The amount of apprentice labor hours the contract can or did attain along with the percentage of labor hours.

3. Contractors may receive a GFE credit for graduated Apprentice hours through the end of the calendar year for all projects worked on as long as the Apprentice remains continuously employed with the same Contractor they were working for when they graduated. If an Apprentice graduates during employment on a project of significant duration, they may be counted towards a GFE credit for up to one year after their graduation or until the end of the project (whichever comes first). Determination of whether or not Contract requirements were met in good faith will be made by subtracting the hours from the journeyman total reported hours for the project and adding them to the apprentice hour total. If the new utilization percentage meets the Contract requirement, the Contractor will be reported as meeting the requirement in good faith.

4. Anticipated or actual shortfall (in apprentice labor hours and percentage) and the reason(s) for not attaining the required apprentice labor hours.

5. Information from one or more of the following areas:

(a) Names of any State-Approved Apprentice Training Programs contacted with the name(s) of person(s) contacted and dates of contacts, and a copy of each response from the Training Program(s).

(b) Reference Contract Specifications or documents that affected the Contractor’s ability to attain apprentice utilization.

(c) Discuss efforts the Contractor has taken to require Subcontractors to solicit and employ apprentices.

6. Backup documentation to the letter consisting of the following:

(a) Letters, emails, phone logs including names dates and outcomes, posters, photos, payrolls, timecards, schedules, copies or references to other contract specifications or documents.

6 Additional Resource Information

(a) For questions regarding how to complete the Apprentice Utilization Plan template or Good Faith Effort documentation, please contact the Project Manager listed in the Bid Advertisement.

(b) Step-by-step instructions on how to access and navigate the L&I’s PWIA system, including uploading required documents can be found on the L&I website.

(c) Additional information about apprentice utilization on Public Works Project can be found on the L&I website.

0.01 PREPARATION OF BIDS

A. Bidders must be registered as a vendor through the DES Public Procurement Portal (https://deswa.bonfirehub.com). Bid submissions must be submitted through the DES Public

Procurement Portal (https://deswa.bonfirehub.com). The individual who has signed/submitted the Bid through the E Portal shall be the authorized designee responsible for bid submissions.

B. All bidders for Small Works Projects must be currently registered on the MRSC Small Works Roster (vendor list) found http://mrscrosters.org/.

C. Bidders are required to submit bid prices for one or more items on various bases through the DES Public Procurement Portal on the BidTable, including: (1) lump sum base bid; (2) lump sum bid alternate prices; (3) unit prices; or (4) any combination of items 1 through 3 above.

D. If the solicitation includes alternate bid items, failure to bid on the alternates may disqualify the bid. If bidding on all items is not required, Bidders should indicate “no bid” on the DES Public Procurement Portal BidTable for any item on which no price is submitted.

E. Substitute bid forms will not be considered unless this solicitation authorizes their submission.

0.02 BID GUARANTEE

A. When the sum of the base bid plus all additive bid alternates is $35,000.00 or less, bid security is not required.

When the sum of the base bid plus all additive alternates is greater than $35,000.00, a bid guarantee in the amount of 5% of the base bid amount is required. Failure of the Bidder to provide bid guarantee when required shall render the bid non-responsive.

http://mrscrosters.org/

B. Acceptable forms of bid guarantee are A bid bond or postal money order, or certified check or cashier’s check made payable to the Washington State Treasurer. At the time of bid, the bidder must upload an electronic copy of the acceptable bid guarantee to the DES Public Procurement Portal (https://deswa.bonfirehub.com).

If any of the 3 lowest responsive bidders has indicated a cashier’s check as their form of bid security, they will be contacted by DES with instructions on how to submit the original/valid cashier’s check within 48 hours of being notified. The Owner will return bid guarantees (certified check or cashier’s check) to unsuccessful Bidders as soon as practicable, but not sooner than the execution of a contract with the successful Bidder. The successful Bidder’s bid guarantee will be returned to the successful Bidder with its official notice to proceed with the work of the contract.

C. The Bidder will allow 60 days from bid opening date for acceptance of its bid by the Owner.

The Bidder will return to the Owner a signed contract, insurance certificate and bond or bond waiver within 15 days after receipt of the contract. If the apparent successful Bidder fails to sign all contractual documents or provide the bond and insurance as required or return the documents within 15 days after receipt of the contract, the Owner may terminate the award of the contract.

D. In the event a Bidder discovers an error in its bid following the bid opening, the Bidder may request to withdraw its bid under the following conditions:

1. The Bidder must submit written notification of the withdrawal to the Owner within 24 hours following the bid opening.

2. The Bidder provides written documentation of the claimed error to the satisfaction of the

Owner within 72 hours following the bid opening.

3. The Owner will approve or disapprove the request for withdrawal of the bid in writing. If the Bidder’s request for withdrawal of its bid is approved, the Bidder will be released from further obligation to the Owner without penalty. If it is disapproved, the Owner may retain the Bidder’s bid guarantee.

0.03 ADDITIVE OR DEDUCTIVE BID ITEMS

The low Bidder, for purposes of award, shall be the responsive Bidder offering the low aggregate amount for the base bid item, plus additive or deductive bid alternates selected by the Owner, and within funds available for the project.

The Bidder agrees to hold all bid alternate prices for sixty (60) days from date of bid opening.

0.04 ACKNOWLEDGEMENT OF ADDENDA

Bidders shall acknowledge receipt of all addenda to this solicitation by identifying the addenda numbers on the DES Public Procurement Portal Submittal Questionnaire. Failure to do so shall result in the bid being declared non-responsive.

0.05 SITE INVESTIGATION AND CONDITIONS AFFECTING THE WORK

The Bidder acknowledges that it has taken steps necessary to ascertain the nature and location of the work, and that it has investigated and satisfied itself as to the general and local conditions which can affect the work or its cost, including but not limited to; (1) conditions bearing upon transportation, disposal, handling, and storage of materials; (2) the availability of labor, water, electric power, and road; (3) uncertainties of weather, river stages, tides, or similar physical conditions at the site; (4) the conformation and conditions of the ground; and (5) the character of equipment and facilities needed preliminary to and during the work.

The Bidder also acknowledges that it has satisfied itself as to character, quality, and quantity of surface and subsurface materials or obstacles to be encountered insofar as this information is reasonably ascertainable from an inspection of the site, including exploratory work done by the Owner, as well as from the drawings and specifications made a part of this contract. Any failure of the Bidder to take the actions described and acknowledged in this paragraph will not relieve the Bidder from responsibility for estimating properly the difficulty and cost of successfully performing the work.

0.06 BID AMOUNTS

A. The bid prices shown for each item on the DES Public Procurement Portal BidTable shall include all labor, material, equipment, overhead and compensation to complete all of the work for that item.

B. The actual cost of building permit (only) and the public utility hookup fees will be a direct reimbursement to the Contractor or paid directly to the permitting agency by the Owner. Fees for these permits should not be included by the Bidder in the bid amount.

C. The Bidder agrees to hold the base bid prices for sixty (60) days from date of bid opening.

0.07 TAXES

The bid amounts shall not include Washington State Sales Tax (WSST). All other taxes imposed by law shall be included in the bid amount. The Owner will include WSST in progress payments. The Contractor shall pay the WSST to the Department of Revenue and shall furnish proof of payment to the Owner if requested.

[NOTE: Contractor must bond for contract amount plus the WSST.]

0.08 SUBMISSION OF BIDS

A. Bids must be submitted on or before the time as specified in the Advertisement for Bids.

B. The Bid shall be submitted electronically through the DES Public Procurement Portal as specified in the Advertisement for Bids.

C. Prior to the bid opening, the Owner’s representative will designate the official bid clock. Any part of the Bid Form, or in the rare situation of a bid modification, not received prior to the specified times, per the designated bid clock, will not be considered and the bid will be returned to the Bidder unopened.

D. A bid may be withdrawn electronically by a Bidder’s authorized representative before the bid submittal date and time specified in the Advertisement for Bids.

E. People with disabilities who wish to request special accommodation, (e.g., sign language interpreters, braille, etc.) need to contact the Owner ten (10) business days prior to the scheduled bid opening.

F. In the event the DES Public Procurement Portal is unavailable to all users at the bid submittal deadline, DES will contact the Bidders within 24 hours, and DES will extend the bid submittal time.

G. Neither DES nor DES Public Procurement Portal can guarantee the availability of Internet connectivity or related telecommunication and hosting services and will not be liable or responsible if the Bidder and its representative(s) or designee(s) cannot connect to the DES Public Procurement Portal.

H. The Bidder must comply with the Euna Procurement Portal’s Terms of Service

(https://gobonfire.com/terms-service/) when submitting the Bid through the DES Public Procurement Portal.

https://gobonfire.com/terms-service/

0.09 SUBCONTRACTOR LISTING

Pursuant to RCW 39.30.060, when the consultant’s estimated cost of the project, including the base bid and additive alternates, is $1 million or more, bidders shall comply with…