20002853-0.pdf
PDF 16 KB Posted
- Attached to
- Term TX|550-A2|17427212984|20002853
- Contract number
- 20002853
- Issued by
- Texas
About this file
This document is a Purchase Order (PO No. 20002853) issued by the Texas Department of Transportation (TxDOT) on September 20, 2019, with Wenzel Wenzel & Associates, Inc. as the contractor. The purchase order is for TxDOT's District 601, located in Seguin, Texas, with invoice processing to be handled by the TxDOT Voucher Processing department in Austin, TX.
The purchase order is for 300 traffic barricades manufactured by Fender Enterprises, specifically Portable Plastic Type III barricades that are 8 feet wide with orange/white (O/W) reflective sheeting. The total contract value is $161,385.00, with each barricade priced at $537.95. The barricades are to be delivered by October 21, 2019, under a term contract (Contract 550-A2), with strict specifications regarding materials, UV stabilization, reflective sheeting, and compliance with TxDOT and federal transportation standards. The order includes provisions for partial or early delivery and detailed requirements for barricade construction and materials.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Purchase Order PO No. 20002853
Order Date: 9/20/2019
Internal Tracking No.: 601290000016339
Contractor Info Bill To Ship To Wenzel Wenzel & Associates, Inc.
17427212984 1332 Azalea Ln New Braunsfels, TX 78130
(830) 606-5723
TXDOT - VOUCHER PROCESSING
125 E 11TH ST
INV TO: FIN_INVOICES@TXDOT.GOV
AUSTIN TX 78701-2483
Texas Department of Transportation Texas Department of Transportation - 601
(830) 379-3755 2024 Highway 46 North D29-9 D29-9 Seguin TX 78155
NOTE TO CONTRACTOR: **** TO BE SHIPPED IMMEDIATELY ****
Deliver To:
TxDOT Seguin RDC Attn: Roland Ramon 2024 Highway 46 North Seguin, TX 78155
(830) 463-0933
Vendor is cautioned to ship only the quantity of items ordered. TxDOT is not obligated to accept any items exceeding the quantity stated on the purchase order. Overages may be returned to the vendor at the vendor's expense. If the vendor refuses the return, the overage will be handled as a gift to the state.
TxDOT will accept partial or early delivery of this purchase order.
Barricades or barricade components shall meet the following requirements:
1) Reflective sheeting shall conform to Departmental Material Specification DMS-8300, Type C, latest revision.
2) Hi-Impact rigid PVC shall be UV stabilized using 10 parts of T102 as UV stabilizer. NOTE: 1-1/2 inch square, 12-gauge perforated steel tube support stiffener/lower cross-member may be needed on some barricade systems with plastic rails to provide structural support (see CWZTCD Figure D-1) or as stipulated within manufacturer's guidelines.
3) Rails: 1 inch by 8 inch by 8 feet, white, rectangular, hi-impact rigid PVC having retro-reflective sheeting as described below:
4) Sheeting: Type C high intensity retro-reflective, red/white (R/W) or orange/white (O/W) for Type III end or Type III and left (L) or right (R). All components used for replacement parts shall meet the following requirements: Caution: Any unit delivered to the F.O.B. point which does not meet requirements in every aspect will not be accepted.
5) All Type III barricades shall be built in accordance with the detailed drawings shown on the Compliant Work Zone Traffic Control Device List (CWZTCD). Only drawings attached by reference to the RFP; Figure D-1 (Perforated Square Metal tubing Barricade with Plastic Rails Showing Lower Structural Cross Member), Figure D-2 (Wood/Plastic Type III Barricade), Figure D-3 (Plastic/Fiberglass Type III Barricade), Figure D-4 (Wood/Plastic/Fiberglass Type-III Barricade) shall be considered. All text outside of the drawing boxes shall not apply.
6) The barricades shall also meet TxDOT Standard Plans for Barricades and Construction Standards BC(10), latest revision and be in compliance with MUTCD, and FHWA NCHRP-350 requirements.
7) Barricade rail reflective sheeting shall meet the requirements of TxDOT's Prequalification Program as follows: Type C high intensity retro-reflective sheeting meeting TxDOT Departmental Material Specification DMS-8300, latest revision, and shall be listed on Material Producer List (MPL) for Sign Face Materials, latest revision. Substitutions are prohibited.
Manufacturer shall stamp company and part number into product for ease of identification for replacement purposes, etc.
Purchase Order PO No. 20002853
Order Date: 9/20/2019
Internal Tracking No.: 601290000016339
Disclaimer The State of Texas is exempt from all Federal Excise Taxes except as noted in each contract.
STATE AND CITY SALES TAX EXEMPTION CERTIFICATE:
The undersigned claims an exemption from taxes under Texas Tax Code, Section 151.309(4), for purchase of tangible personal property described in this numbered order, purchased from contractor and/or shipper listed above, as this property is being secured for the exclusive use of the State of Texas, or a Texas County, City, Special District, or Other Political Subdivision.
Texas Comptroller of Public Accounts – Statewide Procurement Division
Agency Purchaser Email Phone
Te x a s D e p a r t m e n t o f Transportation - 601
Brooke Taylor Brooke.Taylor@txdot.gov (512) 416-4790
Line
NIGP
Code
Commodity Code/ Supplier Part #
Item QTY UOM Unit Price Extended Price
1 55078 55078183500 Barricades, Traffic, Portable Plastic Type III, O/W, R or L, 8 feet Wide by 8 inch Contract: 550-A2 Contract Type: Term Delivery ARO (days): 30 Delivery Date: 10/21/2019 Notes: NIGP # 55078183518 (For TxDOT internal use only)
MPN: 0475-73-8-O/W-10
Manufacturer Name: Fender Enterprises
300 EACH 537.95 $161,385.00
Total $161,385.00
File details come from the government source that posted it. Updated .