Amd_0001_WY_KO_911_to_K2A_Cable_Replacement_0001.pdf

PDF 4 MB Posted Nov 21, 2023

Attached to: WY - KORTES 911 TO K2A CABLE REPLACEMENT
Solicitation number: 140R6024Q0008
Issued by: Department of the Interior Bureau of Reclamation

About this file

Written by GovTribe AI · Dec 21, 2023

This is a solicitation for a cable replacement project. The Bureau of Reclamation is seeking quotes to supply various electrical components and materials to replace cables running from Kortes 911 to K2A. Required items include compression connectors, power cables, conductor, and termination kits. Quotes are due by November 28th and the period of performance is from December 7th to January 12th. The solicitation is set aside for small businesses and will result in a firm-fixed price contract. Delivery location and point of contact are provided.

View the file

Other files

File	Type	Posted
Sol_140R6024Q0008_Amd_0001.pdf	PDF	Nov 21, 2023
WY_KO_911_to_K2A_Cable_Replacement.pdf	PDF	Nov 15, 2023
Sol_140R6024Q0008.pdf	PDF	Nov 15, 2023

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

(x)

140R6024Q0008 x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

Billings MT 59107

R60

PO Box 36900 Regional Office Great Plains Region Bureau of Reclamation

11/09/20230001

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

11/09/2023

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Description of changes:

1) Salient Characteristic change on original SF 1449 item number item III should be 650 ft, not 700ft.

2) Note: Please ensure to sign the SF 1449, which was provided in the original solicitation, and the SF 30 that is provided with this Amendment.

For convenience, essential changes on the revised solicitation pages are indicated by a vertical line within the margin, whereby the lines or paragraphs are changed from the previous version. However, all portions of the revised solicitation pages shall apply, whether changes thereon have or have not been indicated.

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Travis Stephens

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 2

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140R6024Q0008/0001

Receipt of Quotation: The hour for receipt of quotations remains the same: 11:00 AM (Mountain

Standard Time). The date for receipt of quotations remains the same: November 28, 2023.

Third Party: If you have provided a copy of this solicitation to another company or person, please forward this amendment accordingly.

This is a Request for Quote (RFQ) for New (not

Refurbished) Brand Name or Equal Supplies:

I. Two-Hole Lug Compression Connector: 1000 kcmil Max Wire Size equivalent to 3M 31178 (quantity

12) (Brand Name or Equal)

II. Two-Hole Lug Compression Connector: 750 kcmil Max Wire Size equivalent to 3M 31172 (quantity

12) (Brand Name or Equal)

III. Medium Voltage Power Cable ¿ 1000 kcmil (quantity 650 feet) shielded and jacketed cable equivalent to Southwire 95606099 (Brand Name or

Equal)

IV. Bare Copper Conductor, stranded ¿ 750 kcmil (quantity 90 feet) equivalent to Southwire

10725090 (Brand Name or Equal)

V. 3M TM Cold Shrink QT-II Outdoor Termination Kit 5694K (quantity 4 packages) equivalent to 3M part number 5694K,3M ID 7000132467, UPC

00054007493983 (Brand Name or Equal)

VI. 3M TM Cold Shrink QT-II Indoor Termination Kit 6025K (quantity 4 packages) equivalent to 3M part number 6025K, 3M ID 7000132476, UPC

00054007499374 (Brand Name or Equal)

Please submit quotations to Contract Specialist

Natalie Oslund by e-mail at noslund@usbr.gov.

Delivery:01/12/2024

Period of Performance: 12/07/2023 to 01/12/2024

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

Bureau of Reclamation, Wyoming Area Office WY Kortes 911 to K2A Cable Replacement 140R6024Q0008/0001 General Information Contract Opportunity Type: Request for Quote

Classification Product Service Code: 5935 Connectors, Electrical, 5940 Lugs, Terminals, and Terminal Strips, 6145 Wire and Cable, Electrical NAICS Code: 335931 Current-Carrying Wiring Device Manufacturing

Description New (not Refurbished) Brand Name or Equal Supplies:

I. Two-Hole Lug Compression Connector: 1000 kcmil Max Wire Size equivalent to 3M 31178

(quantity 12) (Brand Name or Equal) II. Two-Hole Lug Compression Connector: 750 kcmil Max Wire Size equivalent to 3M 31172

(quantity 12) (Brand Name or Equal) III. Medium Voltage Power Cable – 1000 kcmil (quantity 650 feet) shielded and jacketed cable equivalent to Southwire 95606099 (Brand Name or Equal) IV. Bare Copper Conductor, stranded – 750 kcmil (quantity 90 feet) equivalent to Southwire

10725090 (Brand Name or Equal) V. 3M™ Cold Shrink QT-II Outdoor Termination Kit 5694K (quantity 4 packages) equivalent to

3M part number 5694K,3M ID 7000132467, UPC 00054007493983 (Brand Name or Equal) VI. 3M™ Cold Shrink QT-II Indoor Termination Kit 6025K (quantity 4 packages) equivalent to 3M part number 6025K, 3M ID 7000132476, UPC 00054007499374 (Brand Name or Equal)

Contract Type:

Firm-Fixed Price

Set Aside Total Small Business

Delivery Timeframe The estimated need by delivery date of all components is January 12, 2024.

Evaluation Criteria See 52.212-2

Point of Contact Email quotations and other correspondence related to this Request for Quote to Contract Specialist Natalie Oslund at NOslund@usbr.gov.

140R6024Q0008/0001

PRICE SCHEDULE

1. Contractor/quoter shall provide the quotation in accordance with the price schedule below.

2. All quotations must be valid for a minimum of 90 days.

3. The Government reserves the right to not make award.

4. The Government reserves the right to incorporate additional changes in quantity of similar or like goods.

5. The Government intends to only make one award for all line items.

6. Quotations and Delivery shall be F.O.B. Destination. Offers submitted on a basis other than F.O.B. destination will be rejected as non-responsive.

7. Items shall be new (not refurbished).

8. Payment will be made upon delivery of all line items.

9. Payment will be made by the Invoice Processing Platform (IPP) only.

10. Purchase Order type is a firm-fixed price.

Contract Line Item

(CLIN)

Description Qty Unit Unit Price Total Price in U.S.

Dollars

10 Two-Hole Lug Compression Connector: 1000 kcmil Max Wire Size equivalent to 3M 31178 (Brand Name or Equal)

12 EA $ $

20 Two-Hole Lug Compression Connector: 750 kcmil Max Wire Size equivalent to 3M 31172 (Brand Name or Equal)

12 EA $ $

30 Medium Voltage Power Cable – 1000 kcmil shielded and jacketed cable equivalent to Southwire 95606099 (Brand Name or Equal)

650 FT $ $

40 Bare Copper Conductor, stranded – 750 kcmil equivalent to Southwire 10725090 (Brand Name or Equal)

90 FT $ $

50 3M™ Cold Shrink QT-II Outdoor Termination Kit 5694K equivalent to 3M part number 5694K,3M ID 7000132467, UPC 00054007493983 (Brand Name or Equal)

4 EA $ $

60 3M™ Cold Shrink QT-II Indoor Termination Kit 6025K equivalent to 3M part number 6025K, 3M ID 7000132476, UPC 00054007499374 (Brand Name or Equal)

4 EA $ $

Total $

140R6024Q0008/0001

Required Salient Characteristics

a. Standard Equipment

i. Two-Hole Lug Compression Connector: 1000 kcmil Max Wire Size

ii. Two-Hole Lug Compression Connector: 750 kcmil Max Wire Size

iii. Medium Voltage Power Cable – 1000 kcmil, insulated and jacketed

iv. Bare Copper Conductor, stranded – 750 kcmil

v. 3M™ Cold Shrink QT-II Outdoor Termination Kit 5694K

vi. 3M™ Cold Shrink QT-II Indoor Termination Kit 6025K

b. Additional Requirements

i. Two-Hole Lug Compression Connector: 1000 kcmil Max Wire Size

(quantity 12)

1. Compression Lug equivalent to 3M 31178

2. Termination Style: Crimp

3. Tongue Length: 3 inch

4. Tongue Width: 1.72 inch

5. Tongue: 2 holes (1.75 in center to center)

6. Hole/Stud Size: .5 inch

7. Barrel ID: 1.17 inch

8. Straight Barrel

9. Maximum Voltage 35 kVAC

10. Compression Die Code: 27

ii. Two-Hole Lug Compression Connector: 750 kcmil Max Wire Size (quantity 12)

1. Compression Lug equivalent to 3M 31172

2. Termination Style: Crimp

3. Tongue Length: 3 inch

4. Tongue Width: 1.72 inch

5. Tongue: 2 holes (1.75 in center to center)

6. Hole/Stud Size: .5 inch

7. Barrel ID: 1.03 inch

8. Straight Barrel

9. Maximum Voltage 35 kVAC

10. Compression Die Code: 24

iii. Medium Voltage Power Cable – 1000 kcmil (quantity 650 feet)

1. 1000 kcmil shielded and jacketed cable equivalent to Southwire 95606099

2. Type MV-105 Cable

3. 1 Copper Conductor

4. 61 strands

5. Conductor Size: 1000 kcmil

6. Insulation Material: EPR-Ethylene Propylene Rubber or equivalent

7. Insulation nominal thickness: .220 inch

140R6024Q0008/0001

8. Jacket Material: PVC-Polyvinyl Chloride or equivalent

9. Shield Type: 5-mil copper tape with 25% overlap

10. Voltage Range: 15 KV

11. Compatible with cable try and conduit

12. Insulation Type: 133% insulation level

13. For Use in DIV II Locations

14. Follows: UL 1072

iv. Bare Copper Conductor, stranded – 750 kcmil (quantity 90 feet)

1. 750kcmil bar copper cable equivalent to Southwire 10725090

2. 61 strands

3. Suitable for overhead transmission and distribution

v. 3M™ Cold Shrink QT-II Outdoor Termination Kit 5694K (quantity 4 packages)

1. Cold shrink termination kit equivalent to 3M part number 5694K, 3M ID

7000132467, UPC 00054007493983

2. One-piece cold shrink termination kit

3. Suitable for outdoor, weather exposed applications

4. Silicone Rubber Termination Kit

5. Voltage Rating: 15 KV

6. Meets IEEE 48, Class 1 for Outdoor, weather-exposed applications

7. Tight seal for tape shield

8. 6 skirts

9. 3 cold shrink kits per package

vi. 3M™ Cold Shrink QT-II Indoor Termination Kit 6025K (quantity 4 packages)

1. Cold shrink termination kit equivalent to 3M part number 6025K, 3M ID

7000132476, UPC 00054007499374

2. One-piece cold shrink termination kit

3. Suitable for weather protected areas (indoor)

4. Silicone Rubber Termination Kit

5. Voltage Rating: 15 KV

6. Meets IEEE 48

7. Tight seal for tape shield

8. 3 cold shrink kits per package

2. Required Specifications

a. Items shall be new (not refurbished).

140R6024Q0008/0001

3. Delivery

i. The delivery location is

Bureau of Reclamation – Warehouse

ATTN: KO K2A Cable– Jeremy Hickox

205 Chamberlain Rd.

Mills, WY 82644

ii. The point of Contact is Jeremy Hickox (jhickox@usbr.gov) and Larry Wood (lwood@usbr.gov)

b. Delivery will be conducted during business hours, Monday through Friday 8:00 AM to 4:00 PM. Contact Larry Wood (lwood@usbr.gov) with time truck will be arriving at least three days before arrival. No deliveries on federal holidays.

c. The estimated need by delivery date of all components is January 12, 2024.

140R6024Q0008/0001

CLAUSES

52.252-2 Clauses Incorporated by Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Federal Acquisition Regulation: https://www.acquisition.gov/far

Department of the Interior Acquisition Regulation: https://www.acquisition.gov/diar

Clause Number

Clause Title Clause Date

52.212-4 Contract Terms and Conditions – Commercial Products and Commercial Services

Nov 2023

52.204-13 System for Award Management Maintenance Oct 2018

52.204-18 Commercial and Government Entity Code Maintenance Aug 2020

52.204-19 Incorporation by Reference of Representations and Certifications

Dec 2014

52.223-6 Drug-Free Workplace May 2001

52.232-39 Unenforceability of Unauthorized Obligations Jun 2013

52.233-1 Disputes May 2014

52.242-15 Stop Work Order Aug 1989

52.243-1 Changes-Fixed-Price Aug 1987

DOI-AAAP-0028 Electronic Invoicing and Payment Requirements-Invoice Processing Platform (IPP) (APR 2013)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

'Payment request' means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is:

https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an

140R6024Q0008/0001 attachment to the IPP invoice:

The Contractor shall submit a soft copy of their invoice via IPP.

Failure to upload a copy of the invoice may cause significant delay or possible rejection of your payment request.

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

(End of Local Clause)

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services (Nov 2023)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR

2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (AUG 1996) ( 31 U.S.C. 3553).

140R6024Q0008/0001

(7) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN

2020), with Alternate I (NOV 2021) ( 41 U.S.C. 4704 and 10 U.S.C. 4655).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV

2021) ( 41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

__ (4) 52.203-17, Contractor Employee Whistleblower Rights (NOV 2023) ( 41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

__ (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN

2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (6) [Reserved].

__ (7) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

__ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

_X_ (9) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub. L. 117-328).

__ (10) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) ( 31 U.S.C. 6101 note).

__ (11) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) ( 41 U.S.C. 2313).

__ (12) [Reserved].

__ (13) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) ( 15 U.S.C. 657a).

140R6024Q0008/0001

__ (14) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) ( 15 U.S.C. 657a).

__ (15) [Reserved]

_X_ (16) (i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-6.

__ (17) (i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-7.

__ (18) 52.219-8, Utilization of Small Business Concerns (SEP 2023) ( 15 U.S.C. 637(d)(2) and (3)).

__ (19)

(i) 52.219-9, Small Business Subcontracting Plan (SEP 2023) ( 15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (NOV 2016) of 52.219-9.

__ (iii) Alternate II (NOV 2016) of 52.219-9.

__ (iv) Alternate III (JUN 2020) of 52.219-9.

__ (v) Alternate IV (SEP 2023) of 52.219-9.

__ (20)

(i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) ( 15 U.S.C. 644(r)).

__ (ii) Alternate I (MAR 2020) of 52.219-13.

__ (21) 52.219-14, Limitations on Subcontracting (OCT 2022) ( 15 U.S.C. 637s).

__ (22) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP

2021) ( 15 U.S.C. 637(d)(4)(F)(i)).

__ (23) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (OCT

2022) ( 15 U.S.C. 657f).

_X_ (24) (i) 52.219-28, Post Award Small Business Program Rerepresentation (SEP

2023)( 15 U.S.C. 632(a)(2)).

140R6024Q0008/0001

__ (ii) Alternate I (MAR 2020) of 52.219-28.

__ (25) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (OCT 2022) ( 15 U.S.C. 637(m)).

__ (26) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (OCT 2022) ( 15 U.S.C. 637(m)).

__ (27) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR

2020) ( 15 U.S.C. 644(r)).

__ (28) 52.219-33, Nonmanufacturer Rule (SEP 2021) ( 15U.S.C. 637(a)(17)).

_X_ (29) 52.222-3, Convict Labor (JUN 2003) (E.O.11755).

_X_ (30) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (NOV 2023) .

_X_ (31) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

_X_ (32) (i) 52.222-26, Equal Opportunity (SEP 2016) (E.O.11246).

__ (ii) Alternate I (FEB 1999) of 52.222-26.

__ (33) (i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) ( 38 U.S.C. 4212).

__ (ii) Alternate I (JUL 2014) of 52.222-35.

_X_ (34) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN

2020) ( 29 U.S.C. 793).

__ (ii) Alternate I (JUL 2014) of 52.222-36.

__ (35) 52.222-37, Employment Reports on Veterans (JUN 2020) ( 38 U.S.C. 4212).

__ (36) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496).

_X_ (37) (i) 52.222-50, Combating Trafficking in Persons (NOV

2021) ( 22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (MAR 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627).

__ (38) 52.222-54, Employment Eligibility Verification (MAY 2022) (Executive Order 12989).

(Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

140R6024Q0008/0001

__ (39) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (MAY 2008) of 52.223-9 ( 42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (40) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

__ (41) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

__ (42) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (OCT 2015) of 52.223-13.

__ (43) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun2014) of 52.223-14.

__ (44) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY

2020) ( 42 U.S.C. 8259b).

__ (45) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT

2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (JUN 2014) of 52.223-16.

_X_ (46) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O. 13513).

__ (47) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

__ (48) 52.223-21, Foams (Jun2016) (E.O. 13693).

__ (49) (i) 52.224-3 Privacy Training (JAN 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (JAN 2017) of 52.224-3.

_X_ (50) (i) 52.225-1, Buy American-Supplies (OCT 2022) ( 41 U.S.C. chapter 83).

__ (ii) Alternate I (OCT 2022) of 52.225-1.

140R6024Q0008/0001

__ (51) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) ( 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109- 283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I [Reserved].

__ (iii) Alternate II (DEC 2022) of 52.225-3.

__ (iv) Alternate III (NOV 2023) of 52.225-3.

__ (v) Alternate IV (Oct 2022) of 52.225-3.

__ (52) 52.225-5, Trade Agreements (NOV 2023) ( 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_X_ (53) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (54) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008;

10 U.S.C. Subtitle A, Part V, Subpart G Note).

__ (55) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) ( 42 U.S.C. 5150).

__ (56) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) ( 42 U.S.C. 5150).

__ (57) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021).

__ (58) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV 2021) ( 41 U.S.C. 4505, 10 U.S.C. 3805).

__ (59) 52.232-30, Installment Payments for Commercial Products and Commercial Services (NOV 2021) ( 41 U.S.C. 4505, 10 U.S.C. 3805).

_X_ (60) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (OCT2018) ( 31 U.S.C. 3332).

__ (61) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) ( 31 U.S.C. 3332).

__ (62) 52.232-36, Payment by Third Party (MAY 2014) ( 31 U.S.C. 3332).

140R6024Q0008/0001

__ (63) 52.239-1, Privacy or Security Safeguards (AUG 1996) ( 5 U.S.C. 552a).

__ (64) 52.242-5, Payments to Small Business Subcontractors (JAN

2017) ( 15 U.S.C. 637(d)(13)).

__ (65) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV

2021) ( 46 U.S.C. 55305 and 10 U.S.C. 2631).

__ (ii) Alternate I (APR 2003) of 52.247-64.

__ (iii) Alternate II (NOV 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

__ (1) 52.222-41, Service Contract Labor Standards (AUG 2018) ( 41 U.S.C. chapter67).

__ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY

2014) ( 29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (AUG

2018) ( 29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

__ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) ( 41 U.S.C. chapter 67).

__ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (MAY 2014) ( 41 U.S.C. chapter 67).

__ (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN

2022).

__ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

__ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) ( 42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified

140R6024Q0008/0001 acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV

2021) ( 41 U.S.C. 3509).

(ii) 52.203-17, Contractor Employee Whistleblower Rights (NOV 2023) ( 41 U.S.C. 4712).

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub. L. 117-328).

140R6024Q0008/0001

(vii) 52.219-8, Utilization of Small Business Concerns (SEP 2023) ( 15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(viii) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

(ix) 52.222-26, Equal Opportunity (SEP 2015) (E.O.11246).

(x) 52.222-35, Equal Opportunity for Veterans (JUN 2020) ( 38 U.S.C. 4212).

(xi) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) ( 29 U.S.C. 793).

(xii) 52.222-37, Employment Reports on Veterans (JUN 2020) ( 38 U.S.C. 4212).

(xiii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xiv) 52.222-41, Service Contract Labor Standards (AUG 2018) ( 41 U.S.C. chapter 67).

(xv)

(A) 52.222-50, Combating Trafficking in Persons (NOV 2021) ( 22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I (MAR 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627).

(xvi) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) ( 41 U.S.C. chapter 67).

(xvii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (MAY 2014) ( 41 U.S.C. chapter 67).

(xviii) 52.222-54, Employment Eligibility Verification (MAY 2022) (E.O. 12989).

(xix) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order

14026 (JAN 2022).

(xx) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

(xxi) (A) 52.224-3, Privacy Training (Jan 2017) ( 5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

140R6024Q0008/0001

(xxii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (JUN

2020) ( 42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxiv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV

2021) ( 46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.219-6 Notice of Total Small Business Set-Aside (Nov 2020)

(a) Definition. Small business concern, as used in this clause—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the size standards in this solicitation.

(2) Affiliates, as used in paragraph (a)(1) of this clause, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) Applicability. This clause applies only to-

(1) Contracts that have been totally set aside for small business concerns; and

(2) Orders set aside for small business concerns under multiple-award contracts as described in 8.405-5 and 16.505(b)(2)(i)(F).

(1) Offers are solicited only from small business concerns. Offers received from concerns that are

140R6024Q0008/0001 not small business concerns shall be considered nonresponsive and will be rejected.

(2) Any award resulting from this solicitation will be made to a small business concern.

52.246-16 Responsibility for Supplies (Apr 1984)

(a) Title to supplies furnished under this contract shall pass to the Government upon formal acceptance, regardless of when or where the Government takes physical possession, unless the contract specifically provides for earlier passage of title.

(b) Unless the contract specifically provides otherwise, risk of loss of or damage to supplies shall remain with the Contractor until, and shall pass to the Government upon-

(1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or

(2) Acceptance by the Government or delivery of the supplies to the Government at the destination specified in the contract, whichever is later, if transportation is f.o.b. destination.

(c) Paragraph (b) of this clause shall not apply to supplies that so fail to conform to contract requirements as to give a right of rejection. The risk of loss of or damage to such nonconforming supplies remains with the Contractor until cure or acceptance. After cure or acceptance, paragraph (b) of this clause shall apply.

(d) Under paragraph (b) of this clause, the Contractor shall not be liable for loss of or damage to supplies caused by the negligence of officers, agents, or employees of the Government acting within the scope of their employment.

52.247-22 Contractor Liability for Loss of and/or Damage to Freight other than Household Goods (Apr 1984)

Except when loss and/or damage arises out of causes beyond the control and without the fault or negligence of the Contractor, the Contractor shall assume full liability for any and all goods lost and/or damaged in the movement covered by this contract.

52.247-34 F.o.b. Destination (Nov 1991)

(a) The term "f.o.b. destination," as used in this clause, means-

(1) Free of expense to the Government, on board the carrier’s conveyance, at a specified delivery point where the consignee’s facility (plant, warehouse, store, lot, or other location to which shipment can be made) is located; and

(2) Supplies shall be delivered to the destination consignee’s wharf (if destination is a port city and supplies are for export), warehouse unloading platform, or receiving dock, at the expense of the Contractor. The Government shall not be liable for any delivery, storage, demurrage, accessorial, or

140R6024Q0008/0001 other charges involved before the actual delivery (or "constructive placement" as defined in carrier tariffs) of the supplies to the destination, unless such charges are caused by an act or order of the Government acting in its contractual capacity. If rail carrier is used, supplies shall be delivered to the specified unloading platform of the consignee. If motor carrier (including "piggyback") is used, supplies shall be delivered to truck tailgate at the unloading platform of the consignee, except when the supplies delivered meet the requirements of Item 568 of the National Motor Freight Classification for "heavy or bulky freight." When supplies meeting the requirements of the referenced Item 568 are delivered, unloading (including movement to the tailgate) shall be performed by the consignee, with assistance from the truck driver, if requested. If the contractor uses rail carrier or freight forwarded for less than carload shipments, the contractor shall ensure that the carrier will furnish tailgate delivery, when required, if transfer to truck is required to complete delivery to consignee.

(b) The Contractor shall-

(1) (i) Pack and mark the shipment to comply with contract specifications; or

(ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements;

(2) Prepare and distribute commercial bills of lading;

(3) Deliver the shipment in good order and condition to the point of delivery specified in the contract;

(4) Be responsible for any loss of and/or damage to the goods occurring before receipt of the shipment by the consignee at the delivery point specified in the contract;

(5) Furnish a delivery schedule and designate the mode of delivering carrier; and

(6) Pay and bear all charges to the specified point of delivery.

52.252-6 Authorized Deviations in Clauses. (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter

1) clause with an authorized deviation is indicated by the addition of (DEVIATION) after the date of the clause.

(b) The use in this solicitation or contract of any DOI Local Clause with an authorized deviation is indicated by the addition of (DEVIATION) after the name of the regulation.

(End of clause)

WBR 1452.237-80 Security Requirements -- Bureau of Reclamation (Mar 2022)

(a) General Security Requirements:

140R6024Q0008/0001

(1) This clause addresses security requirements, including general procedural requirements, information security requirements, contractor employee suitability requirements, identification card requirements, site security requirements, vessel exclusion barriers, and information technology security requirements. Within this clause, COR means Contracting Officer's Representative. If there is no COR appointed and identified to the Contractor, the term instead will mean the Program Manager or any other authorized individual responsible for technical oversight under the contract. “Work site” means the Government facility, office, construction site, and any other area within the Government office or facility that the Contractor must access to accomplish work under this contract.

(2) The work performed under this contract shall only be accomplished by individuals (in the employment of the Contractor or any subcontractors) whose conduct and behavior is consistent with the efficiency of the Federal Service and the requirements of this contract, and who are acceptable to the contracting officer. If Reclamation finds a Contractor employee to be unsuitable or unfit for his or her assigned duties, the contracting officer will direct the Contractor to remove the individual from the contract and access to the Federal facility at which the contract activities are occurring.

(3) The Contractor’s employees governed by this contract may need access to sensitive information and/or sensitive areas. The Federal Government (Government) reserves the right, in its sole discretion, to determine suitability of Contractor personnel and deny access to any sensitive information or project specific area to any personnel for any cause.

(4) The Contractor is responsible for informing and ensuring compliance by its employees with any applicable security procedures of the Government facility where work may be performed under this contract.

(5) Any Contractor employee that will have access to a Federally-controlled facility or information system will be required to have a Government-issued identification card, consisting of a Personal Identity Verification (PIV) Card, a temporary identification card, or a visitor badge. (Note: within the Department of the Interior this card is known as a DOI Access Card.) During performance of the contract, the Contractor shall keep the COR apprised of any changes in personnel, or changes in personnel access or duration, to ensure that performance is not delayed by compliance with credentialing processes.

(6) A Contractor employee will not be provided access to a Government facility or information system until a Government PIV Card, temporary identification card, or visitor identification badge has been issued to the Contractor

140R6024Q0008/0001 employee. For those individuals that will be receiving a PIV Card, the Government may, at its discretion, issue a temporary identification card or visitor identification badge after the electronic background investigation forms have been received and the investigation is initiated.

(7) All Contractor employees shall access the facility via the facility’s entry screening system and visibly display the Government-issued PIV Card, temporary identification card, or visitor identification badge at all times.

Contractor employees must visibly wear the Government-issued identification card at all times they are on Government facilities.

Contractor employees are responsible for the safekeeping of all Government-issued identification cards, whether on-site or off-site. Cards that have been lost, damaged, or stolen must be reported to the COR and DOI Access Sponsor immediately, but not later than within 24 hours. The Contractor shall return all identification cards and card keys and any other Government property and information upon completion of performance or when personnel depart permanently or for a period of 7 days or more. The Contractor may be required to turn in access control cards or identification cards on a daily basis.

(8) Misuse or loss of access control or identification cards, or failure to comply with required surrender of such cards may, at Government discretion, result in Contractor personnel being denied access to the work site, at no cost to Government. The Contractor may be charged up to $500 for each occurrence for any required replacement of Government- issued access control or identification cards due to loss or misuse. At the end of contract performance, or when a Contractor employee is no longer working under this contract, the Contractor shall ensure that all access control and identification cards are returned to the COR.

(9) All Contractor personnel, including subcontractor personnel, with access to the work site shall be U.S.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 21, 2023.