Misc Documents_0001.pdf

BUILDING THE FUTURE

REHABILITATING THE PAST

BOARDWALKS | PEDESTRIAN BRIDGES| ROAD BRIDGES | VIEWING PLATFORMS | WHARVES, JET TIES & PONTOONS

COMPOSITE FIB TECHNOLOGIES

PEDESTRIAN

BRIDGES

Longevity - Making Your Dollars Go Further - Zero Maintenance:

• The buzz words of Infrastructure Managers around the world today. Along with serviceability and durability, these are the areas that enable your valuable $$ Dollars to go further when your planning that next project

• WAGNERS CFT can help achieve the best out comes with a FRP solution that will provide Zero Maintenance for 40 years and a design life of 100 years

Design:

• Designed in accordance with all local – state and federal regulatory requirements

• Bridge designs and styles are many. Sizes and loads vary (tables below are only an indication and subject to design criteria)

• Designed to your mobility and load requirement

Supply:

• Either pre-fabricated ready to drop in

• In semi assembled form for easy transport to site

• Pre drilled ready for assembly on site in difficult locations

• On-site support

Bridge Type Span

Girder 0 - 16m 0 - 52’

Light Truss 8 - 20m 26 - 66’

Heavy Truss 12 - 35m 40 - 115’

Installation:

• Our light weight structures allow for easy construction with minimal if not smaller machinery than usual

• Drop it in with a crane, helicopter or build insitu, the decision is yours

Life Span:

• Consistent Properties, engineered material with well understood characteristics

• Color fast fluropolymer coating, Colo Durability Rating ‘Extra Long Term’ expected 40 years to first repaint.

• Will not rust, corrode or rot, split or warp

• Impervious to Acid Sulphate Soils and Alkaline or Salt

Warranty:

• Full parts Replacement Warranty for 7 years – 100 year

Design Life

• 25 year warranty on Coating performance – estimated

40 years to first maintenance on painted surfaces

NO they’re NOT steel or timber.

All are Wagners CFT - Fib Reinforced Polymer No corrosion. No wood rot, splitting or warping and NO PAINTING for 40 years

Structures look every bit the part, but they perform even better than they look

COMPOSITE FIB TECHNOLOGIES

Wagners CFT Structures look every bit the part, but they perform even better than they look.

Easy to install no matter where or what the location is - this one flown in by helicopter to a remote valley in the mountains.

Wagners CFT will provide you all the features and benefits you have longed for from the first steps in design, to install, to the seven year full warranty that’s standard on our structures, to the predicted 40 years of minimal maintenance and a 100 year design life!

BOARDWALKS

Constructing your boardwalk, viewing platform or pedestrian bridge from

Wagners Composite Fibre (FRP - Fibre Reinforced Polymer) is an investment for future generations.

Minimal maintenance (zero in many cases) equates to a lifelong asset.

Designed for 100 year life expectancy

Future prices calculated at 3% CPI annually.

Maintenance calculated at 3% of initial structure cost annually.

0 years 2018 2020 2022 2024 2028 2038 2048 2058 2068 2068

10 years 20 years 30 years 40 years 50 years 60 years

Major oiling during first 6 years to stop shrinkage $32,000

Replace structure

$525,000

20 years maintenance

$173,000

Replace structure

$950,000

20 years maintenance

$311,000

Repaint visual aspects

$65,000

Replace decking

$80,000

Total maintenance

10 year period

$55,000

Replace structure

$289,000

20 years maintenance

$96,000

Staff are freed up to do other work

Staff are still free to do other work

$160,000 $1,243,000 $2,504,000

$498,000$381,000

$545,000

$200,000 $345,000 $345,000 Minimal maintenance - mainly only visual inspections

Most of the additional costs recovered in the first 6 years and the lifecycle continues...A WAGNERS CFT STRUCTURE

INITIAL COST $200,000

A TIMBER STRUCTURE

INITIAL COST $160,000

$200, 000 Total maintenance

10 year period

$0

Total maintenance

10 year period

$0

Cooktown Fishing Platform At Wagners we are all about finding long term solutions that provide initial cost benefits as well as the long term financial returns.

Three observation/viewing/fishing platforms installed in the tropics, pummelled yearly by cyclones and extreme weather.

This Boardwalk-Viewing structure in the remote Outback of Australia where temperatures soar to 120F/50C in the day and drop to 15F/-10C at night…… yet both structures look comfortable in their environments, and with a 100 year design life on both structures they should.

Many generations to come will enjoy the visual and financial benefits of choosing WAGNERS CFT components.

Baloon Cave Viewing Platform

FROM THE COAST TO THE MOUNTAINS WCFT HAS THE SOLUTION FOR YOU

100 YEAR DESIGN LIFE:

ANTICIPATED 40 YEARS TO FIRST MAINTENANCE

The Chesterhope Bridge in Hastings New Zealand had no Pedestrian or Cycleway, it was 500 yds / 460 m of sheer hell if you were on foot or cycling.

The options limited the solution to a Clip-On style structure which would separate motor vehicles and pedestrians/cyclists.

The 50 year old structure would limit the dead load of a cantilevered structure – the only viable solution a light weight FRP one, with reduced dead load and the structural integrity to support the live load.

Supplied and installed at 50% of initial estimates using traditional materials in half the expected time with a 100 year design life. Not bad if you can do it.

So it would make sense to talk to Wagners CFT before you commit to a more expensive, less environmentally friendly solution with less longevity.

Why would you accept less?

The story of Wagners Composite Technologies (WCFT) goes back nearly twenty years so we won’t dwell on it too much, other than to say as part of a bigger Global the newly formed CFT division was spawned through hard work and sweat by a few great men.

Their quest was to create an Structural Element to replace timber/ lumber, and steel and to achieve a 100 year design life.

A product that would out last these known basic building materials, and do it with less, if not a zero maintenance out come. The resulting product has gone on to become a versatile success spawning Structural Beams and Elements for Road Bridges, Pedestrian Bridges, Boardwalks, Viewing

Platforms, Light Poles, Wharves, Jetties, Pontoons, Retaining Walls, Verandas, Pool Decks and a hundred other uses, too many to list here.

What you see here in this book is testament of the quality and versatility of the Wagners CFT Fib Reinforced Polymer (FRP) Structural Sections, Girders, I-Beams and U-Beams, along with the other innovative components that make up the product range.

To achieve the 100 year Design Life and the performance standards stated in the independently tested Properties Tables, the product has had to be manufactured to the utmost levels of quality.

The ISO9000 accreditation and the testing regime has been as stringent as preparing a shuttle for a trip into orbit (well nearly). But it is rigorous and relentless to maintain the accreditation.

What’s important here and to understand is that to achieve the highest of foot traffic loads on boardwalks and pedestrian bridges, and spans that exceed those of traditional materials, to exceed the cyclic ramifications of motor vehicle movements, to meet the strict standards applied by engineers and designers on point loads, live loads and deflections when designing and building road bridges Wagners CFT have undertaken years of independent testing and trials to establish proven and tested properties that meet the required engineering required.

To do this Wagners CFT manufacture to a Fibre Reinforced Polymer

Quality Level of GV36 (G – represents the Quality of Glass Fibres, V – represents the highest quality Vinyl Ester Resin that we use and the 36 is for those engineers the Youngs Modulus or the Deflection, Stiffness and

Elasticity (in GPa - 5200 ksi).

Like Steel and Lumber there are different grades within this group and it is the combination of fibre and resin matrix that determines the ultimate strength. The materials Wagners CFT manufacture are of a quality that is far, far above those who might seek to imitate the performance levels and integrity of Wagners CFT Sections and Structural Elements.

All of our elements are tested to far exceed any engineering parameters that are imposed on them, you can be assured that Wagners CFT are the setting the quality bar well above the rest.

WHY WAGNERS CFT STRUCTURAL FRP

SHOULD BE YOUR FIRST AND ONLY CHOICE!

Delivered to the City of Geelong We believe the first FRP pedestrian bridge over electrified rail in the southern hemisphere.

Installed in 12 hours by way of a single lift

ROAD BRIDGES

Installation:

• Because Wagners CFT road bridges reduce transport costs, are easier to move and deliver on site – Installation Costs are

Reduced!

• Abutment replacement or build costs in many cases are

Reduced

Life Span:

• Consistent Properties, engineered material with well understood characteristics

• Guaranteed longevity and maintenance-free performance

• Superstructure that just can’t rust or corrode

• Will not react with acid sulphate soils

Warranty:

• 100 year design life on materials - 7 year Parts Replacement Warranty.

• 25 years warranty on coating - 40 years to first maintenance on exposed painted surfaces.

TIMBER OR STEEL REPLACED

WITH WCFT (FRP) UBEAMS &

CONCRETE DECK

Designed & built to your local Road Authority Standards

100 year design life, (even if you have need to salt the surface)

Design:

• Material properties generated from product testing and subsequent statistical analysis in accordance with your local building regulations

• Designed according to all regulatory standards

• Maximum design loads:

- Full composite - T44

- Composite FRP and concrete deck combination

Supply:

• Pre-drilled to client specifications

• Pre-fabricated at clients request

• On-site support

IDEAL FOR

ALL LOCATIONS

ERIE COUNTY, NEW YORK STATE, USA

The bridge here is in Erie County, NY State, USA and is one of five installed in the region using Wagners CFT structural FRP beams for tension below the natural axis with a concrete deck for compression above. After twelve years of service in the harsh environment of the Great Lakes region they show zero effects from natures elements and definitely NO Corrosion (the effect of having no steel sub structure)

• Extreme temperature Variation

• Rain – Hail – Snow – Salt and Shine

• In the Mountains or Under the Sea

• All have Zero Effect on the Performance and Longevity of Wagners CFT Sections

ROAD BRIDGES

JETTIES, WHARFS

& PONTOONS

A new wharf on existing piles in the epicentre of cyclone territory in Cooktown, far north Queensland, Australia. Our design life takes into account what these big winds and waves might throw at it.

Esperance Jetty, Western Australia A complete re-build from piles to hand rails, all in Wagners CFT (FRP) materials. Pre-assembled and barged to site. Minimal labour, built under budget and in line with strict environmental guidelines. A One Hundred Year design life, It looks great and the locals love it.

Top of Stairs

Bottom Of Stairs

272mm Tread Width

C S1031

S104

S104

S105

S105

S105

2 3 4 5 6 7 8 9 10 11 12 13 14 15

A

B

C

D

E

F

G

H

I

J

K

L

DESIGN ASSISTANCE

Wagners CFT has the in-house capability to assist consulting design and project engineers to look at feasibility design through to certification of your first or next

Wagners CFT composite structure.

The location doesn’t matter - the longevity does

BENEFITS

Longevity with Minimal Maintenance Wagners CFT will not rot, warp, split or be affected by termites -corrosion and rust are non-existent in the Wagners CFT world, as is shipworm or teredo worm. Salt in the snow season is not an issue either. Wagners CFT is not affected in any way by any of these problematic issues.

Easy Installation Wagners products are not heavy. From prefabricating complex structures to ease of handling, you can be assured of rapid installation.

Inert From marine environments to storing caustic and acidic chemicals, Wagners products will not deteriorate like traditional materials such as timber/lumber, aluminum and steel.

COMPOSITE FIB TECHNOLOGIES

Mining & Industrial Applications Providing minimal maintenance & financial benefits

BOARDWALKS | PEDESTRIAN BRIDGES| ROAD BRIDGES | VIEWING PLATFORMS | WHARVES, JET TIES & PONTOONS info@wagnerscft.com South Eastern States West Coast and Northern States Mid and South West States Southern Central States

CANADA

+1 (813) 733 1705 +1 (307) 763 0985 +1 (970) 999 2344 +1 (972) 800 1321 +1 (972) 800 1321 cftsales@WAGNER.com.au+61 (0) 7 4637 7777

REGION PHONE NUMBER EMAIL

PHONE NUMBER EMAILglobal head office

11 ballera court, wellcamp queensland australia 4350 australia north america mini mesh decking decking composite fiber technologies (cft)

Composite Fiber Technologies (CFT) wagnerscft.com

The choice of decking for a Wagners composite product is just as important as the structure of the product itself. With plenty of options to choose from, decking can be selected depending on the environment, use and overall aesthetic of the asset.

To view our extensive color range, please visit our website or scan the QR code at the back of the page.

table 1. mesh PRODUCT table

MESH

mini mesh

» Standard sizing up to 2 in. thick

» Can be designed to take Maintenance Vehicular Loads up to 5.2 t.

» Recommended screws: 8 gauge type 17 pan head with stainless steel M-clip

DESIGN

» Custom sizes are available, cut to the nearest web for a clean finish

» Minimum screw edge distance: 11/4 in.

» Recommended sheet spacing: 1/16 in.

» Low slip potential as per ASTM E303-93 micro mesh » Standard sizing up to 1 1/2 in. thick

» 5/16 in. square opening

» Can be designed to take Maintenance Vehicular Loads up to 1.77 t.

» Recommended screws: 1/4 in. washer head

Thickness (in.)

Bar Thickness (in.)

Bar Spacing (Top/Bottom) (in.)

Aperture (in.)

Open Rate

Max. Panel Size (ft.)

Weight (lb/ft2)

Slip Potential

(ASTM E303-93)

Micro Mesh

1” 3/16" 1/2" x 1/2" 1 9/16" x 1 9/16" 5/16" x 5/16" 38 5’ x 13’ x 3' 1/4” 3.65 Low

1-1/4” 3/16" 1/2" x 1/2" 1 9/16" x 1 9/16" 5/16" x 5/16" 38 4’ x 12’ 3.91 Low

1-1/2” 3/16" 1/2" x 1/2" 1 9/16" x 1 9/16" 5/16" x 5/16" 38 5’ x 12’ 1/4" 5.12 Low

Mini-Mesh

1” 1/4" 3/4" x 3/4" 1 1/2" x 1 1/2" 1/2" x 1/2" 43 4' 1/16" x 12' 1/8" 3.44 Low

1-1/4” 1/4" 3/4" x 3/4" 1 1/2" x 1 1/2" 1/2" x 1/2" 43 4' 1/16" x 12' 1/8" 3.85 Low

1-1/2” 1/4" 3/4" x 3/4" 1 1/2" x 1 1/2" 1/2" x 1/2" 43 4' 1/16" x 12' 1/8" 4.81 Low

2” 1/4" 16/16" x 16/16" 1 15/16" x 1 15/16" 11/16" x 11/16" 52 5' 1/4" x 12' 5/16" 5.33 Low decking

Composite Fiber Technologies (CFT) wagnerscft.com covertop » Standard sizing up to 23/4 in. thick

» No perforation in top face

» Custom sizes are available; cut to the nearest web for a clean finish

» Low slip potential as per ASTM E303-93

» Minimum screw edge distance: 11/4 in.

» Recommended screws: 14 gauge type 17 bulge head with washer (where high uplift loads are expected)

» Recommended sheet spacing: 1/16 in.

» Can be designed to take Maintenance or

Emergency Vehicular Loads up to 8 t.

DESIGN

table 2. covertop PRODUCT table covertop

MULTIPLE DECKING STYLES FOR

ANY DESIGN SPECIFICATION.

Thickness (in.)

Bar Thickness

(in.)

Bar Spacing (Top/Bottom)

(in.)

Max. Panel Size

(in.)

Weight (lb/ft2)

Slip Potential

(ASTM E303-93)

1” 1/4" 1 1/2" x 1 1/2" 4' 1/16" x 12' 1/8" 4.3 Low

1-1/4” 1/4" 1 1/2" x 1 1/2" 4' 1/16" x 12' 1/8" 4.71 Low

1-3/4” 1/4" 1 1/2" x 1 1/2" 4' 1/16" x 12' 1/8" 5.94 Low

2-1/4” 1/4" 1 15/16" x 1 15/16" 5' 1/4" x 12' 5/16" 6.76 Low treddeck table 3. treddeck

» Consists of two layers; Covertop Decking base with a hard-wearing stone non-slip surface top layer bound with a UV-stabilised epoxy resin

» Standard sizing up to 21/2 in. thick

» Minimum screw edge distance 11/4 in.

» Low slip potential as per ASTM E303-93

» Recommended screws: 14 gauge type 17 countersunk head

» Recommended sheet spacing: 1/16 in. filled with sealant

» Can be designed to take Maintenance or Emergency Vehicular Loads up to 8 t.

design Thickness

(in.)

Mesh Thickness

(in.)

Max. Panel Size

(in.)

Slip Potential

(ASTM E303-93)

1-1/4" 13/16" 4' 1/16" x 12' 1/8" Low

1-3/8" 16/16" 4' 1/16" x 12' 1/8" Low

1-1/2" 1 3/16" 4' 1/16" x 12' 1/8" Low

2-1/4" 1 11/16" 5' 1/4" x 12' 5/16" Low

2-1/2" 2 3/16" 4' 1/16" x 12' 1/8" Low contact us info@wagnerscft.com www.wagnerscft.com

South Eastern States +1 (813) 733 1705 West Coast and Northern States +1 (307) 763 0985 Mid and South West +1 (970) 999 2344 Southern Central States and Canada +1 (972) 800 1321

SCAN THE QR CODE FOR WAGNERS

COLOR AND COATINGS BROCHURE

wagners componentry mesh m clip minimesh covertop treddeckmicromesh

27 wagnerscft.comCOMPOSITE FIBER TECHNOLOGIES (CFT) info@wagnerscft.com

South Eastern States +1 (813) 733 1705

West Coast and Northern States +1 (307) 763 0985

Mid and South West States +1 (970) 999 2344

Southern Central States +1 (972) 800 1321 and canada contact us

Our accessory products can be colored to suit your design needs.

Premium colors may incur price variations.

Whilst every effort is made to accurately color match, variation in color on the final product may occur.

PREMIUM RANGE

kickrails

STANDARD RANGE

BLACK BROWN GRAY

WHITE SATIN

2721139S

OYSTER MATTE

27236858

SHALE GREY SATIN

27283246

BLACK SATIN

27219268

PREMIUM RANGE STANDARD RANGE

STANDARD RANGEPREMIUM RANGE

mesh and covertop decking balustrade aCCESSORY Coating Colors

SAND

RAL 1002

PALE BROWN

RAL 8025

BLACK

RAL 9005

CHARCOAL

RAL 7021

WINDOW GRAY

RAL 7040

composite fiber technologies (cft) wagnerscft.com

South Eastern States +1 (813) 733 1705

West Coast and Northern States +1 (307) 763 0985

Mid and South West States +1 (970) 999 2344

Southern Central States +1 (972) 800 1321 and canada contact us info@wagnerscft.com www.wagnerscft.com

Wagners CFT Manufacturing Pty Ltd A.B.N. 91 099 936 446 • PO Box 151 Drayton North QLD 4350 • Telephone: +61 7 4637 7777 • Email: cftsales@wagner.com.au • Internet: www.wagnerscft.com.au

PRODUCT GUIDE Version 04 • July 2016 • Part 7 – Page 3

MICRO-MESH

PRODUCT CODE

Thickness

(mm) Bar Thickness (Top/Bottom)

Mesh Size (mm)

Panel Size (mm) Weight (kg/m2)

Open Rate

Colour Pattern Loading

Max. Joist Span (mm)

Point Load

1.4 kN 2.5 kN 4.5 kN

DGS-VMIC-12.7x30 30 7.5 & 4.5/6.0 12.7x12.7

38x38 1220x3660,1220x2440, 915x3050 22 30 CH, LG, BK, BR

3 kPa 750 600 400

5 kPa 750 600 400

DGS-VMIC-13x30 30 6.5/4.5/5.0

13x13 40x40

1527x4047, 1247x4047, 1007x3007, 1007x4047

18.8 30

CH, LG, BK, BR

3 kPa 750 600 400

5 kPa 750 600 400

DGS-VMIC-13x38 38 6.5/4.5/5.0 23.8 30 3 kPa 1000 1000 750

5 kPa 900 900 750

NOTE:

Charcoal (Dark Grey) = CH; Light Grey = LG; Black = BK; Brown = BR

Decking, Grating & Stair Treads Wagners CFT have supplied pedestrian structural elements sch as gratings, mesh and covertops all across Australia, from the sweltering tropics to the burning deserts. Our products are uniquely suited to withstand the harshest environments while providing a low maintenance, long life asset to the local community. Wagners mesh, gratings and cover tops are perfect for coastal, marine and environmentally sensitive areas. From tidal flood plains and protected mangrove swamps to alkaline desert and corrosive mining or oil/gas facilities. Wagners products have proven time and time again their unique durability and strength. Possessing a full in-house test and certification team, Wagners will work hand in hand with the clients’ staff to insure a robust, aesthetically pleasing pedestrian asset that will provide decades of service.

Benefits

• Low maintenance • Long life span • Will not rust rot or corrode • Termite proof

• Prefabrication and scheduled works delivery

• Inert, environmentally stable material

• Light weight • Quick & easy installation

Product Code designation (e.g. DGS-VMIC-13x25):

DGS = Decking Grating Stair Treads V = Vinyl Ester resin DEK = Bridge Deck MIC = Micro-Mesh MIN = Mini-Mesh MSH = Mesh COV = Cover Mesh

Mini-Mesh Decking

Wagners CFT Manufacturing Pty Ltd A.B.N. 91 099 936 446 • PO Box 151 Drayton North QLD 4350 • Telephone: +61 7 4637 7777 • Email: cftsales@wagner.com.au • Internet: www.wagnerscft.com.au

PRODUCT GUIDE Version 04 • July 2016 • Part 7 – Page 4

MINI-MESH

PRODUCT CODE

Thickness

(mm) Bar Thickness (Top/Bottom)

Mesh Size (mm)

Panel Size (mm) Weight (kg/m2)

Open Rate

Colour Pattern Loading

Max. Joist Span (mm)

Point Load

1.4 kN 2.5 kN 4.5 kN

DGS-VMIN-19x30 30 6.5/5.0

19x19 38x38

1220x3660, 1220x2440, 915x3050, 1524x4027, 1220x4000, 1530x4047

19.1 30

CH, LG, BK, BR

3 kPa 750 600 400

5 kPa 750 600 400

DGS-VMIN-19x38 38 6.5/5.0 1220x3660, 1220x2440, 915x3050, 1220x4000, 1226x4010

23.5 30

3 kPa 1000 1000 750

5 kPa 900 900 750

NOTE:

Charcoal (Dark Grey) = CH; Light Grey = LG; Black = BK; Brown = BR

MINI-MESH

PRODUCT CODE

Thickness

(mm) Bar Thickness (Top/Bottom)

Mesh Size (mm)

Panel Size (mm) Weight (kg/m2)

Open Rate

Colour Pattern Loading

Max. Joist Span (mm)

Point Load

1.4 kN 2.5 kN 4.5 kN

DGS-VMIN-20x30 30 6.5/5.0

20x20 40x40

1007x4047, 1007x3007, 1247x4047, 1527x4047

18.3 42

CH, LG, BK, BR

3 kPa 750 600 400

5 kPa 750 600 400

DGS-VMIN-20x38 38 6.5/5.0 22.8 42 3 kPa 1000 1000 750

5 kPa 900 900 750

NOTE:

Charcoal (Dark Grey) = CH; Light Grey = LG; Black = BK; Brown = BR

MESH

PRODUCT CODE

Thickness

(mm) Bar Thickness (Top/Bottom)

Mesh Size (mm)

Panel Size (mm) Weight (kg/m2)

Open Rate

Colour Pattern Loading

Max. Joist Span (mm)

Point Load

1.4 kN 2.5 kN 4.5 kN

DGS-VMSH-38x38 38 7.0/5.0

38x38

1220x3660, 1220x4010, 1524x4038, 2100x4010, 998x4010, 1220x4010, 915x3050, 1532x4010, 1532x3050, 1000x4000

19.5 68

CH, LG, BK, BR

3 kPa 750 600 400

5 kPa 750 600 400

DGS-VMSH-38x50 50 9.5/7.5 1220x3660, 1220x4010, 1230x4010, 1220x2440, 915x3050 42 56

3 kPa 1000 1000 750

5 kPa 900 900 750

NOTE:

Charcoal (Dark Grey) = CH; Light Grey = LG; Black = BK; Brown = BR

Wagners CFT Manufacturing Pty Ltd A.B.N. 91 099 936 446 • PO Box 151 Drayton North QLD 4350 • Telephone: +61 7 4637 7777 • Email: cftsales@wagner.com.au • Internet: www.wagnerscft.com.au

PRODUCT GUIDE Version 04 • July 2016 • Part 7 – Page 5

Covertop Mesh Moulded grating is manufactured in an open, heated mould system. Continuous E-glass roving’s are placed in the mould in alternating layers (on one side or two) and completely wetted out with resin. This continuous process produces an integral, one piece construction which provides excellent corrosion resistance as well as bi-directional strength. There are a number of different moulds available resulting in a

COVERTOP MESH

PRODUCT CODE

Thickness

(mm) Bar Thickness (Top/Bottom)

Mesh Size (mm)

Panel Size (mm) Weight (kg/m2)

Open Rate

Colour Pattern Loading

Max. Joist Span (mm)

Point Load (kN)

1.4 2.5 4.5 10

DGS-VCOV-30

(25+5) 6.0/5.0

38x38

1220x3660, 1226x4010, 1532x4010, 915x3050, 1524x4000, 997x3012

21.8 0

CH, LG, BK, BR

3 kPa 1000 1000 750 n/a

5 kPa 1000 1000 750 n/a

DGS-VCOV-43

(38+5) 7.0/5.0

1220x3660, 1220x4010, 1524x4038, 2100x4010, 998x4010, 1220x4010, 915x3050, 1532x4010, 1532x3050, 1000x4000

29.0 0

3 kPa 1200 n/a 1200 1000

5 kPa 1200 n/a 1200 1000

DGS-VCOV-55

(50+5) 9.5/7.5

50x50

1220x3660, 1220x4010, 1230x4010, 1220x2440, 915x3050

33.2 0 3 kPa 1500 n/a 1500 1200

5 kPa 1500 n/a 1500 1200

DGS-VCOV-70

(65+5) 10.5/8.5 1230x4010 38.3 0

3 kPa 1500 n/a 1500 1500

5 kPa 1500 n/a 1500 1500

NOTE:

Charcoal (Dark Grey) = CH; Light Grey = LG; Black = BK; Brown = BR

Industries Functions Advantages

• Chemical plant and metal finishing • Anti-slip floor, stair tread, foot bridge • Anti-fire, anti-corrosion and anti-aging

• Construction engineering, traffic and transportation • Operation platform, trench cover • Anti-slippery

• Petrochemical engineering, ocean survey, water engineering • Security and safety fence, handrail • Light but high loaded strength

• Food and beverage plants • Off-shore oil rig, moor shipyard, shipping deck, ceiling • Long service life and maintenance free

• Textile printing and dyeing and electronics industry • Ramp ladder, scaffold, railway footpath • Non-conduction or magnetic

• Decorative grid, man-made fountain pool grid • Easy installation and rich colours

• Non-conductive and non-magnetic • Various sizes and colours available

Wagners CFT Manufacturing Pty Ltd A.B.N. 91 099 936 446 • PO Box 151 Drayton North QLD 4350 • Telephone: +61 7 4637 7777 • Email: cftsales@wagner.com.au • Internet: www.wagnerscft.com.au

PRODUCT GUIDE Version 04 • July 2016 • Part 7 – Page 6

TredDeck TredDeck is an advanced composite, high strength decking system. It consists of two layers, (ECC) and a top layer of hard wearing stone non slip surface combined with thermoset UV stabilized Epoxy resin placed on to a variety of available decking materials.

Ubiq Inex (UI-19-11) Span Table

Span Live Load or concentrated action

(kN) Uniformly Distributed Load (kPa)

300 10.0 5.0

450 4.5 5.0

600 2.7 3.5

TredDeck Code Overall Thickness

(mm) Board Type

UI-19-11 30 Ubiq Inex

CT-19-5 24

Cover Top Mesh (see next page for span details)

CT-19-10 29

CT-30-5 35

CT-30-10 40

CT-43-5 48

CT-43-10 53

NOTE:

TredDeck Code UI = Ubiq Inex Board, CT = Covertop Mesh

TredDeck Decking riverway drive, townsville memorial walk boardwalk, newcastle boardwalks composite fiber technologies (cft)

Composite Fiber Technologies (CFT) wagnerscft.com

Wagners have supplied boardwalks across the globe. Our composite structures are uniquely suited to withstand the harshest environments while providing low maintenance and long-life assets for the community.

Wagners composite products will not rust, rot or corrode – making our product the perfect choice for environmentally challenging and sensitive areas. Our full in-house design team work closely with clients to ensure a robust, aesthetically pleasing pedestrian asset that provides decades of services. Assembled in our controlled environment with precise tolerances and attention to detail, Wagners build a superior product available in a range of colors.

performance advantages » Quick and easy installation (modularized design)

» Prefabrication and scheduled works delivery

» Lightweight

» Termite proof

» Resistant to acid sulfate soils

» Dispensable cathodic protection

» Inert, environmentally stable material

WAGNERS COMPOSITE PRODUCTS

WILL NOT RUST, ROT OR CORRODE

ENSURING A LOW MAINTENANCE

ASSET WITH A LONG LIFE SPAN.

composite mid and top rail boardwalks composite fiber technologies (cft)

Composite Fiber Technologies (CFT) wagnerscft.com design

MULTIPLE HANDRAIL STYLES FOR

ANY DESIGN SPECIFICATION.

» Designed for North American codes and conditions

» Can incorporate disability requirements

» Can be designed to take Maintenance Vehicular Loads or Emergency Vehicular Loads up to 8t.

» Joist spans from 8ft. to 20ft.

handrails » Composite mid and top rail

» Composite mid with timber top rail

» Vertical balustrade infill with composite top and bottom rails

» Mirror finish handrail or bikerail as an optional extra kickrails mirror finish handrails

Composite kickrails are available in the full array of Wagners structural coating colors listed in the Color and Coatings brochure. The kickrails are hollow and non-conductive providing the option to install lighting to illuminate the boardwalk at night.

Recycled plastic kickrails are also available and are easy to fix directly to the decking. This is a durable option made from recycled materials and is available in brown, gray and black.

recycled plastic kickrails

ENVIRONMENTALLY FRIENDLY

KICKRAILS WITH COMPOSITE OR

RECYCLED PLASTIC.

contact us info@wagnerscft.com www.wagnerscft.com

South Eastern States +1 (813) 733 1705 West Coast and Northern States +1 (307) 763 0985 Mid and South West +1 (970) 999 2344 Southern Central States and Canada +1 (972) 800 1321 pedestrian bridges

Composite Fiber Technologies (CFT) wagnerscft.com

Wagners have built composite structures for use in the sweltering tropics and burning deserts to sub-zero temperatures. Wagners composite structures are uniquely suited to withstand the harshest environments while providing a low maintenance, long-life asset for the local community.

The unique durability and strength of a Wagners structure is perfect for any location where corrosion is an issue, roads are salted during snow or ice periods, coastal and marine environments or in areas that are environmentally sensitive. Assembled in a controlled environment with precise tolerances and attention to detail, Wagners build a superior product. Possessing a full in-house design team and partnering with certification engineers locally, Wagners work closely with the client to ensure a robust, aesthetically pleasing pedestrian asset that will provide decades of service.

performance advantages » Quick and easy installation (modularized design)

» Prefabrication and scheduled works delivery

» Lightweight

» Termite proof

» Resistant to acid sulfate soils

» Dispensable cathodic protection

» Inert, environmentally stable material

WAGNERS COMPOSITE PRODUCTS

WILL NOT RUST, ROT OR CORRODE

ENSURING A LOW MAINTENANCE

ASSET WITH A LONG LIFE SPAN.

pedestrian bridges

Composite Fiber Technologies (CFT) wagnerscft.com design » Designed for North America codes and conditions

» Can incorporate disability requirements

» Typical 100 psf pedestrian load with 1-4t. service vehicle dependant on decking selection

» Girder bridge: 20 - 40ft.

» Light (riveted) truss bridge: 26 - 60ft.

» Heavy (bolted) truss bridge: 33 - 130ft. + composite kickrails supply and installation contact us

» Assembled and ready for easier installation and maneuvering

» On-site support

» Lightweight material allows for a smooth and effective construction

WAGNERS CAN PROVIDE ON-SITE

SUPPORT FOR INSTALLATION.

lifespan and warranty » Consistent properties, engineered material with well understood characteristics

» Color-fast: Durability rating as ‘extra long term’

» Seven years full replacement warranty info@wagnerscft.com www.wagnerscft.com

South Eastern States +1 (813) 733 1705 West Coast and Northern States +1 (307) 763 0985 Mid and South West +1 (970) 999 2344 Southern Central States and +1 (972) 800 1321 Canada shelters

Composite Fiber Technologies (CFT) wagnerscft.com

Wagners composite structures are uniquely suited to withstand the harshest environments while providing a low maintenance, long-life asset for the local community. Wagners have developed design methodologies for composite shelters for access and mobility, walking tracks, infrastructure design, and structural design actions.

The unique durability and strength of a Wagners composite shelter is perfect for coastal, marine and environmentally sensitive areas. Possessing a full in-house design team and partnering with certification engineers locally, Wagners work closely with the client to ensure a robust, aesthetically pleasing asset that will provide decades of service.

performance advantages » Designed and built to local authority standards

» Quick and easy installation

» Lightweight

» Termite proof

» Resistant to acid sulfate soils

» Dispensable cathodic protection

» Inert, environmentally stable material

WAGNERS COMPOSITE PRODUCTS WILL

NOT RUST, ROT OR CORRODE.

shelters

Composite Fiber Technologies (CFT) wagnerscft.com design

LOW MAINTENANCE ASSET

WITH A LONG LIFE SPAN.

» Designed for North American codes and conditions

» Material properties are generated from statistical analysis in accordance with standards

» Designed according to standards with hurricane region compliance lifespan and warranty » Consistent properties, engineered material with well understood characteristics

» Color-fast: Durability rating as ‘extra long term’

» Seven years full replacement warranty supply and installation » Pre-drilled to client specifications

» On-site support available

» Lightweight material allows for smooth and effective construction

» Available in Kit Form contact us

EQUALLY SUITED TO ARID, DESERT LANDSCAPES

OR HOT AND HUMID COASTAL CONDITIONS,

WAGNERS SHELTERS PROTECT FROM WEATHER

EXTREMES IN ANY ENVIRONMENT.

info@wagnerscft.com www.wagnerscft.com

South Eastern States +1 (813) 733 1705 West Coast and Northern States +1 (307) 763 0985 Mid and South West +1 (970) 999 2344 Southern Central States and +1 (972) 800 1321 Canada

Building Innovative Pathways to Nature

We manufacture pre-fabricated, modular boardwalk systems for any environment .

MTS Benefits:

• Detailed design information for specifiers

• Pre-fabricated yet customized to each project

• Durable, steel frames

• Reduced cost and time to install

• Virtually maintenance free

• Minimal environmental impact

• Ongoing support from specification through installation and beyond

Our pre-fabricated modules are DESIGNED for durability and sustainability.

Our process saves time and money on INSTALLATION.

MODULARTRAILSTRUCTURES.COM

Modular Trail Structures, Madison, WI • 608.609.9277 • info@modulartrailstructures.com

HAVE AN UPCOMING BOARDWALK PROJECT?

CONTACT US TODAY.

Backed by years of boardwalk experience, we use innovative manufacturing and quality control processes to make sure our products are easier to build, easier to install and less expensive—which can translate into major savings for contractors and partners.

http://modulartrailstructures.com mailto:info@modulartrailstructures.com

QTY

BILL OF MATERIALS

DESCRIPTION

REQD

MEM. #

MODULAR TRAIL STRUCTURES

PO BOX 7383

MADISON, WI 53707

PHONE: 608-609-9277

www.modulartrailstructures.com

JOB NAME:

LOCATION:

CONTRACTOR:

OWNER:

ICE AGE TRAIL

SLINGER, WI

REVISIONS:

LEVELDESCRIPTION SADDLE BRACKET TO FRAME

TITLE:

DRAWN BY: MTS

CHECKED BY: MTS

DATE: 2 / 09 / 19

APPROVED: MTS

SHEET NO. 4

DATE#

THIS DRAWING AND THE INFORMATION CONTAINED WITHIN IS CONFIDENTIAL AND IS THE PROPERTY OF MODULAR TRAIL

DRAWING MUST BE APPROVED BY MODULAR TRAIL STRUCTURES.

STRUCTURES. ANY USE, REPRODUCTION OR DISCLOSURE OF THE CONTENT OF THIS DRAWING OR ANY PORTION OF THE

2" Ø BOLT : 1.5" LONG : A325 GALVANIZED

3 --

2) STEEL: CORTEN WEATHERING STEEL

1) 10,000 LBS VEHICULAR LOAD

NOTES:

5 1-

6 1-

MODULAR TRAIL STRUCTURES

PO BOX 7383

MADISON, WI 53707

PHONE: 608-609-9277

www.modulartrailstructures.com

JOB NAME:

LOCATION:

CONTRACTOR:

OWNER:

SYRACUSE TRAIL - CONKLIN BAY SEGMENT

SYRACUSE, IN

REVISIONS:

LEVELDESCRIPTION

TITLE:

DRAWN BY: MTS

CHECKED BY: MTS

DATE: 8/1/19

APPROVED: MTS

Sample

DATE#

THIS DRAWING AND THE INFORMATION CONTAINED WITHIN IS CONFIDENTIAL AND IS THE PROPERTY OF MODULAR TRAIL

DRAWING MUST BE APPROVED BY MODULAR TRAIL STRUCTURES.

STRUCTURES. ANY USE, REPRODUCTION OR DISCLOSURE OF THE CONTENT OF THIS DRAWING OR ANY PORTION OF THE

Sample Layoute

Sample Layout brianmkuehn Information Only brianmkuehn Information Only brianmkuehn Confidential brianmkuehn Confidential