RFI_Questions_and_Answers_0001.pdf
PDF 73 KB Posted
- Attached to
- ID-DWORSHAK NFH-MUD VALVE FLANGE ADAPTOR
- Solicitation number
- 140FS124Q0149
About this file
This document is a Request for Information (RFI) Q&A related to a federal contract opportunity for ID-DWORSHAK NFH-MUD VALVE FLANGE ADAPTOR, solicited by the U.S. Department of the Interior Fish and Wildlife Service.
The key details are:
- An acceptable flatness range for the flanges is 30 thousands of an inch (0.030).
- An acceptable dimensional tolerance for the flanges is 0.0625 (1/16") inches.
- A milled surface finish is acceptable for the flanges.
- The solicitation number is 140FS124Q0149.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Sol_140FS124Q0149_Amd_0001.pdf | ||
| Sol_140FS124Q0149.pdf | ||
| B08_Combined_Synopsis_and_Solicitation.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Request for Information Q&A The print does not specify a flatness call out, what would be an acceptable range for flatness?
30 thousands of an inch (0.030) is an acceptable flatness for these flanges
The drawing did not indicate specific dimensional tolerances for the product. Are there any required dimensional tolerances?
0.0625 (1/16") is an acceptable dimensional tolerance for these flanges
What kind of surface finish is required? A milled finish is acceptable.
File details come from the government source that posted it. Updated .