Questions and responses 2 14 20.pdf

70 KB Posted

Attached to
Arc Melter with Chilled Water Vacuum Suction Casting
Solicitation number
1333ND20QNB640103
Issued by

View the file

Other files

File Type Posted
RFQ_Arc Melter Amendment 5 (6-8-2020).pdf PDF
RFQ_Arc Melter Amended 4-27-2020.pdf PDF
RFQ_Arc Melter Amendment 003.pdf PDF
RFQ_Arc Melter Amendment 2.pdf PDF
RFQ_Arc Melter Amendment 001.pdf PDF
RFQ_Arc Melter.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Solicitation: 1333ND20QNB640103 Questions and answers – February 14, 2020

The above referenced solicitation is hereby amended to respond to technical questions submitted. The following questions and responses are hereby provided:

1. Question: On page 9 of Amendment 2, the alloy composition is listed as Fe-0.25 Ni (by mass fraction). Can you please clarify it is 75 wt.% Fe - 25 wt% Ni or 99.75 wt% Fe - 0.25 wt% Ni?

Response: The composition is 75 wt.% Fe - 25 wt.% Ni.

2. Question: On Page 9 of Amendment 2, the rod dimension is described as 50 mm in diameter and 150 mm in length. However, on page 4, section 9.3, the requirement is: Cu vacuum suction casting mold: D 5 mm and L 150 mm. Can you please confirm that 5 mm is the requirement?

Response: The diameter is 5 mm. (see Amendment 003, of the Combined Synopsis/Solicitation)

3. Question: Would the 6.35 mm diameter test rod be acceptable?

Response: Yes, the 6.35 mm diameter rod is acceptable for the test rod only.

File details come from the government source that posted it. Updated .