2018_LEI_Marked_Vehicle_Pickup_truck_Spec_sheet.docx
DOCX document 26 KB Posted
- Attached to
- Law Enforcement Vehicle Up-fit Services
- Solicitation number
- 12837118Q0001
About this file
Marked Truck Specifications
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 12837118Q0001.pdf | ||
| 15-5444.txt | TXT text file | |
| 2018_LEI_Marked_Vehicle_SUV_Spec_sheet.docx | DOCX document | |
| 2018_LEI_Unmarked_Vehicle_Truck_Spec_sheet_v1.docx | DOCX document | |
| 12837118Q0001.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2018 – Southwestern Region Law Enforcement and Investigations Vehicle Standards
Marked LE Pickup Truck The following items will be incorporated into the up-fitting of a marked (striped), Law Enforcement patrol vehicles:
Wiring System
| Item #1 | Modular universal power distribution center: Provides connections to all emergency warning/lighting system, radio communication, and auxiliary electrical components while providing full battery protection. The timer will be set to 1hr. Includes wiring harness. |
| Item #2 | Mobile Radio Wire Harness: Installation of Forest Service radio. Radio model will be provided by the FS. In marked units, a single Motorola APX mobile radio will be used. These models are both 700/800 and VHF. This radio shall be wired to the intallers proprietary modular wiring harness assuring proper power delivery to unit and battery protection. Antenna will be installed with wires left in place within console. |
Lighting and Siren Control and Interior Police Equipment Item #3 Siren and Light Control unit: Unit will have a 3-Position Slide switch and push button auxiliary lighting/siren controls providing one touch programming. Siren control will be wired to provide Horn Ring Scroll to quickly change tones with tap of horn. Control unit will have a timed audible alert to notify user that any functions are activated. Park Kill feature will be enabled to deactivate the siren when the vehicle is shifted into park. Driver Door open kill feature will be enabled to deactivate the siren when the driver’s door is open. Horn Ring feature will be enabled to change audible siren sound via the horn's ring. Handheld PA microphone will be mounted on the left side of the console.
A. Three stage slide type light control for light bar operation.
Slide Switch Position 1 – Rear light Bar- RED/BLUE flashers, All Rear LED and tail lights. To include inside rear LED flashing slim light.
Slide Switch Position 2 – (To include all of Position 1 functions) PLUS- Front light bar Center/grill LED Red/Blue flashing lights.
Slide Switch Position 3 – (To include all of Positions 1&2 functions), PLUS- Front LED flashing Red/Blue oscillating and intersection sweep lights, siren, and headlight flasher wig-wags. The Siren, if selected by user, will be programmed to be operated independently. User will be able to activate "Hi-Lo, Wail or Yelp" as needed by pressing one of three tone programmed buttons and will shut off when vehicle is placed in park and door is opened.
B. One touch programmable button style control position functions:
Button one – Left Alley Button two – Right Alley Button three –Take-downs (Front clear steady lights) Button four – Wig –Wag front flasher lights and Front Red/ Blue Grill lights Button five – Flashing- Light bar LED rear center flashing lights Button six – Spot light
| Item #4 | Security Transport Partition w/ locking firearms mounts: Setina “Quarter Cage” or “Full Cage” front security partition ¼ or ½ screen/ Plexiglas. (Screen behind driver / Plexiglas behind passenger) or equivalent . Side security wrap around protection on both sides of partition will be made of metal screen or bolted Plexiglas. NOTE: DO NOT install Plexiglas with Velcro or snaps. (MUST protect the officer from suspect reaching around the partition). A full lower extension panel with be mounted and both rear door window areas will have metal mesh screens over them. The door screens shall not interfere with up and down operations of window capabilities. Firearms Locks and Mounts**: Weiser WEI-004 or equivalent. Dual rail weapons rack mounted to the partition wall with dual SC-5 handcuff keyed locks. Gun rack must accommodate optics light systems, shotguns with extended magazine tubes, extended forends and tactical stocks. LOCKS MUST properly fit both weapons prior to leaving vendor. One switch will operate both locks with key opening ability. Switch to be wired to the ignition with a 10 sec delay timer and will operate on the ACC or ON position. Switch will not be wired HOT. Switch to be hidden and located on the REAR area of console. Rifle mounted on driver side, shotgun mounted on passenger side. |
| Item #5 | Center Console: Troy Product console or equivalent. Can be 16” to 21” model incorporating a slight upward slant in the forward portion will be used to best accommodate the officers specific needs. Instrument console shall be of metal construction with floor mounts and universal face- plates, and INTERNAL drink cup holder. Power Outlets: ABLE-2 (part # 14.0570), or equivalent. Two 12-volt DC power outlet and two Dual USB outlets. Forest Service Rep will show vendor where they will be located on the center console. |
Item #6 Dome Lights: A dome light will be mounted above the center console; user switchable from red or white light.
Item #7 100 watt speaker/siren: A 100 watt speaker with bracket included will be mounted underneath the hood in the front portion of the engine compartment out of sight and protected from dirt/mud. FS radio will be wired to allow radio broadcast to be received from speaker at agent's option. PA system operated by remote handheld siren/light control will be wired for operation through siren speaker.
Communications Item #8 Wireless Cellular Antenna: Wilson Electronics wireless Dual Band Amplifier, part number 801201 or equivalent. The kit should be powered through the vehicle ignition. Install a universal size cradle designed for smart phone with the interior antenna built in to the cradle (Eg. Wilson Electronics Sleek 4G cradle). The cradle (Model #460107) or equivalent will be mounted on the dash within reach and view of the driver. A low profile roof antenna will be centered in the roof of the cab and will be a type similar to the AP Cell/LTE/WiFi by Antenna Plus or equivalent.
Address: WeBoost 3301 East Deseret Dr St. George, UT 84790 p 435.986.6212 www.sunruh@weboost.com www.weboost.com
Item #9 VHF and 700/800 mhz mobile radio antennas: Two styles of roof mounted antennas will be installed and tested.
Exterior Lighting Item #10 Roof Mounted Light Bar: A 48” or 54” lightbar (vehicle dependent) low profile, clear lenses. Light bar will include features such as takedown and alley lights and discrete rear-arrow warning lights; corner modules 16 LED and inboard modules of 12 LEDs; red drivers, blue passengers; and vehicle mount kit included.
Item #11 Push bumper with flush mounted LED lights: Setina Standard Part # PB450L Series 2” upper crossbar tube, aluminum only or equivalent. Heavy duty push bumper, color Black, mounted to frame. LED split red/blue modules lights 3.85L x 1.8W x 1.34D. Bumper model will be capable of mounting a winch if provided by the FS representative.
| Item #12 | “Wig Wag” and corner LED lights - Front light assembly: Install two red and two blue LED modules for headlight assembly. One red and one blue, 9 LED mounted in each of the front clear headlight assemblies (one red and one blue of each side of vehicle). “Wig Wag” lighting function. “Wig Wags” module function should be installed with high beam override and switched to operate on Level 3 only button on the remote handheld siren/light control. If the vehicle will not accept inserts or the “Wig Wag” function in the head light / high beam light assembly use a minimum 12 LED Dual Color light bar along with, flasher model ULF44, mounted in the grill. Red/White in the center of the grill on the Driver’s side and Blue/White in the center of the grill on the passenger side, to create a Wig Wag with a solid burn option for Take downs or Scene lighting. |
| Item #13 | Rear tail light assembly: Install white LED units, one in each side of the top red lenses of the vehicle tail light assembly and blue LED units in each side of the clear lens backup lights in the tail light assembly. All should have variable flash pattern. |
| Item #14 | Rear window LED lightbar: Interior red/blue LED unit, minimum 12 LEDs, mounted to top of rear hatch door. When rear hatch is opened light is turned off. |
| Item #15 | Rear LED lights mounted to license plate bracket: Mpower Part number |
EMPS2STS5RBW or equivalent. A 4” Fascia Light w/stud mount, 18” hard wire w/sync option, black housing, 18 LED.
Interior Lighting Item #16 Rear window, interior LED lights: Two “SoundOff” Ghost lights, part number EGHST3 or equivalent, will be mounted in the upper portion of the rear window spread equally apart. Light colors will be red on driver’s side and blue on the passenger’s side.
Accessories
| Item #18 | Power inverter: A 1000W power inverter with 120 volt receptacles and USB power, or equivalent. The unit will be mounted in a convenient location based upon the specific vehicle. It will be positioned so that outlets and power switch are accessible. |
| Item #19 | Fire Extinguisher 2.5lb & 5lb units: Amerex (part number AX417T) or equivalent, 2.5 pound UL rating 3A40BC multipurpose dry chemical. Securely mount on passenger side of driver compartment. Location to be verified by FS representative at time of installation. Amerex (part number A500) or equivalent, 5 pound UL rating 3A40Bc multi-purpose dry chemical. Mounted in rear (second row seat) storage area where practical. |
| Item #20 | Window tint; all windows will be tinted to FS specifications and a final decision will be made by an FS representative when vehicles arrive. |
| Item #21 | Rechargeable LED flashlight base: Streamlight rechargeable LED flashlight base installed where accessible to driver. |
| Item #22 | Suspension Leveling spacer kit: Contractor will install aftermarket suspension spacer level kit minimum 2” front and minimum 1.25” rear. Spacers will be made of metal. Kit will be OEM certified. *This option is reserved for pickups not received with appropriate clearance for National Forest System roads. |
Theft Protection Item #23 Secure Idle System: Install secure idle switch manufactured by Secure-Idle Inc. or equivalent. The Agent should be able to put the vehicle in "Park", push the button on the Secure-Idle System on the dashboard accessible from the driver's seat (position button on dash board to the left of the steering column), turn the ignition off and remove the key while the vehicle's engine keeps running. Engine should stop running if someone attempts to drive vehicle without the ignition key. To deactivate, insert the key and turn the ignition to the "on" position.
www.secureidle.com phone: 309-475-2286 Exterior Law Enforcement marking Item #25 Decals Application of decal package and door shield (per FSM 5380). Decal material must meet USFS specifications. ALL DECALS PROVIDED BY CONTRACTOR.
Decal specifications for White Vehicles:
1. Decal materials to be made of 3M NON Reflective
2. Door decal to be a 10” shield White background with Brown lettering and trim
3. Vehicle number to be located under shield on each door
4. Vehicles will have a 4” Green NON reflective striping installed in both sides and the rear of the vehicle. There will be 3” White NON reflective lettering (LAW ENFORCEMENT) both sides installed on green stripe above front fender area. (LAW ENFORCEMENT) will be placed on green stripe on rear of vehicle on the driver side.
Deletions from stock vehicle
| Item #26 | REMOVE the Black fascia underneath front bumper. |
| Item #27 | REMOVE side steps if they come from the OEM with them installed. |
File details come from the government source that posted it.