12639525Q0055-0001.pdf

(x)

12639525Q0055 x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

APHIS-MN-126395

MINNEAPOLIS MN 55401

SUITE410

250 MARQUETTE AVE

USDA APHIS

03/21/20250001

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9B. DATED (SEE ITEM 11)

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.3. EFFECTIVE DATE2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

03/05/2025

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The purpose of this amendment is to:

1. Extend the due date to 03/27/2025 1700 Eastern Time.

2. Amend the the Period of Performance dates.

Change Items 0001-3003 to read as follows:

0001 Sorvall LYNX 6000, ISO 9001 Calibration 5 EA

Product/Service Code: J066

Continued ...

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

STEPHEN C. TEES

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 56

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

12639525Q0055/0001

0002 2 EA

0003 2 EA

0004 5 EA

0005 2 EA

0006 2 EA

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2025 to 04/13/2026

Change Item 0002 to read as follows(amount shown is the obligated amount):

Sorvall RC4, ISO 17025 Calibration

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2025 to 04/13/2026

Change Item 0003 to read as follows(amount shown is the obligated amount):

Sorvall BIOS 16, ISO 17025 Calibration

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2025 to 04/13/2026

Change Item 0004 to read as follows(amount shown is the obligated amount):

Sorvall LYNX 6000 Pre-inspection

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2025 to 04/13/2026

Change Item 0005 to read as follows(amount shown is the obligated amount):

Sorvall RC4 Pre-inspection

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2025 to 04/13/2026

Change Item 0006 to read as follows(amount shown is the obligated amount):

Sorvall BIOS 16 Pre-inspection

Product/Service Code: J066

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

3 56

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

12639525Q0055/0001

1001 5 EA

1002 2 EA

1003 2 EA

2001 5 EA

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2025 to 04/13/2026

Change Item 1001 to read as follows(amount shown is the obligated amount):

Sorvall LYNX 6000, ISO 9001 Calibration

(Option Line Item)

03/01/2026

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2026 to 04/13/2027

Change Item 1002 to read as follows(amount shown is the obligated amount):

Sorvall RC4, ISO 17025 Calibration

(Option Line Item)

03/01/2026

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2026 to 04/13/2027

Change Item 1003 to read as follows(amount shown is the obligated amount):

Sorvall BIOS 16, ISO 17025 Calibration

(Option Line Item)

03/01/2026

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2026 to 04/13/2027

Change Item 2001 to read as follows(amount shown is the obligated amount):

Sorvall LYNX 6000, ISO 9001 Calibration

(Option Line Item)

03/01/2027

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

4 56

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

12639525Q0055/0001

2002 2 EA

2003 2 EA

3001 5 EA

3002 2 EA

Period of Performance: 04/14/2027 to 04/13/2028

Change Item 2002 to read as follows(amount shown is the obligated amount):

Sorvall RC4, ISO 17025 Calibration

(Option Line Item)

03/01/2027

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2027 to 04/13/2028

Change Item 2003 to read as follows(amount shown is the obligated amount):

Sorvall BIOS 16, ISO 17025 Calibration

(Option Line Item)

03/01/2027

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2027 to 04/13/2028

Change Item 3001 to read as follows(amount shown is the obligated amount):

Sorvall LYNX 6000, ISO 9001 Calibration

(Option Line Item)

03/01/2028

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2028 to 04/13/2029

Change Item 3002 to read as follows(amount shown is the obligated amount):

Sorvall RC4, ISO 17025 Calibration

(Option Line Item)

03/01/2028

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2028 to 04/13/2029 Continued ...

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

5 56

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

12639525Q0055/0001

3003 2 EA

Change Item 3003 to read as follows(amount shown is the obligated amount):

Sorvall BIOS 16, ISO 17025 Calibration

(Option Line Item)

03/01/2028

Product/Service Code: J066

Product/Service Description: MAINT/REPAIR/REBUILD

OF EQUIPMENT- INSTRUMENTS AND LABORATORY EQUIPMENT

Period of Performance: 04/14/2028 to 04/13/2029

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Request for Quote (RFQ) 12639525Q0055 Sorvall Centrifuge Services

United States Department of Agriculture (USDA) Animal Plant Health Inspection Service (APHIS) National Bio and Agro-defense Facility (NBAF)

PART 1.0 – THE SCHEDULE OF ITEMS

Item Description of Item Unit Quantity Unit Price Total Price No.

0001 Sorvall LYNX 6000, ISO 9001 Calibration Each 5 $_________ $_________

0002 Sorvall RC4, ISO 17025 Calibration Each 2 $_________ $_________

0003 Sorvall BIOS 16, ISO 17025 Calibration Each 2 $_________ $_________

0004 Sorvall LYNX 6000 Pre-inspection Each 5 $_________ $_________

0005 Sorvall RC4 Pre-inspection Each 2 $_________ $_________

0006 Sorvall BIOS 16 Pre-inspection Each 2 $_________ $_________

1001 Sorvall LYNX 6000, ISO 9001 Calibration Each 5 $_________ $_________

1002 Sorvall RC4, ISO 17025 Calibration Each 2 $_________ $_________

1003 Sorvall BIOS 16, ISO 17025 Calibration Each 2 $_________ $_________

2001 Sorvall LYNX 6000, ISO 9001 Calibration Each 5 $_________ $_________

2002 Sorvall RC4, ISO 17025 Calibration Each 2 $_________ $_________

2003 Sorvall BIOS 16, ISO 17025 Calibration Each 2 $_________ $_________

3001 Sorvall LYNX 6000, ISO 9001 Calibration Each 5 $_________ $_________

3002 Sorvall RC4, ISO 17025 Calibration Each 2 $_________ $_________

3003 Sorvall BIOS 16, ISO 17025 Calibration Each 2 $_________ $_________

Total Price $_________

1.1 SCHEDULE NOTES & INSTRUCTIONS TO CONTRACTORS

The United States Department of Agriculture (USDA), Animal Plant Health Inspection Service (APHIS), Marketing and Regulatory Programs Business Services (MRPBS), Acquisition and Asset Management Division (AAMD) is requesting quotes for Sorvall centrifuge preventative maintenance and repair services. Contractors are hereby instructed that, regardless of any language that may be used in this solicitation, the Department is not conducting this procurement under FAR (Federal Acquisition Regulation) Part 15. This procurement is being conducted under FAR Part 13.

a) The government intends to award a firm-fixed-price (FFP) commercial contract to the selected awardee.

b) The vendor must be able to provide all line items requested.

c) The U.S. Department of Agriculture (USDA) is an agency of the Federal Government and is tax exempt (Tax ID # 41‐069271). The vendor’s price must not include tax.

The contractors must submit its quote electronically via email to:

Contracting Officer Stephen Tees Email: Stephen.Tees@usda.gov

Ensure that the solicitation number and project name, “Sorvall Centrifuge Services” is stated in the subject line.

QUOTE REQUIREMENTS

To be considered for award of this purchase order the Contractor must submit a complete quote consisting of the following:

Cover sheet, limited to one page, to include the point of contact authorized to negotiate and sign on behalf of the Contractor (include phone number and email address), and the SAM Unique Entity Identifier (UEI).

A completed SF 1449 with the following blocks filled out 17a, 30a, 30b, and 30c.

Completed annual representations and certifications of the provision 52.212-3, Offeror Representations and Certifications-Commercial Items in www.SAM.gov.

Include a completed copy of 52.212‐3 Offeror Representations and Certifications – Commercial Products and Commercial Services only if: Annual representations and certifications were not completed electronically in SAM.gov; OR if changes to annual representations and certifications posted electronically at SAM.gov will apply to this solicitation only (i.e. Buy American Certificate (f)).

Note the provision 52.204-7 System for Award Management requires vendors to have an active registration in SAM prior to submission of a quote.

Provision 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment. NOTE: Contractor’s are not required to complete this provision if they answered “does not” in provisions 52.204-26, Covered Telecommunications Equipment or Services— Representation or 52.212-3, Offeror Representations and Certifications-Commercial Products or Commercial Services.

The contractor must submit sufficient information, description, quantities, and technical specifications in the quote for the Government to determine their adequacy and make a comprehensive evaluation of its capability in providing the schedule of items listed in the solicitation and meet all Statement of Work requirements identified in the RFQ.

Acknowledgement of any amendments.

A firm-fixed-price quote showing the prices for all items listed in part 1.0 the schedule of items, including the total price.

The Contractor's unit price must include all costs associated with furnishing and delivering all materials and for performing all work required under the contract in a complete and acceptable manner.

Third-party contractors submitting a quote must include a copy of their agreement with the manufacturer showing authorization to utilize Original Equipment Manufacturer providers for proprietary functions and major repairs. Failure to do so will deem the quote submission as non-responsive.

Do not include a copy of the entire solicitation with your quote. Contractors need only provide the items described above.

1.2 EVALUATION FACTORS FOR AWARD

a) The Government will award a purchase order in accordance with FAR Part 13 resulting from this solicitation to the responsible contractor whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Award will be made to the contractor quote determined to be the best value and provides the greatest overall benefit to the government. To determine the best value for award and the product that best meets the agency’s need, the USDA’S comparative evaluation of contractor quotes will consider technical capability, past performance and price.

b) If the contractor’s quote package does not contain all the items listed Section 1.1 Quote Requirements or is not received by the closing date and time listed in block 8 of the SF 1449, the quote may be considered incomplete for evaluation purposes and no further consideration given to the Contractor’s quote, thereby making a contractor ineligible for award.

1.2.1 Questions

a) The deadline for questions related to this solicitation is Monday, March 10th, 2025, at 5:00 P.M.

ET. All questions must be submitted in writing via email to the Contracting Officer, Stephen Tees.

Any questions received after that date may not be accepted or answered.

1.2.2 Quote Due Date

a) The quote due date and time is listed in block 8 of the Standard Form (SF)1449.

PART 2.0 – SPECIFICATIONS

2.1 STATEMENT OF WORK

a) The Statement of Work (SOW) is incorporated at the end of this document.

2.3 PLACE OF PERFORMANCE

b) The centrifuges must be serviced at the following address:

National Bio and Agro-Defense Facility (NBAF) 1980 Denison Ave Manhattan, KS 66506

2.4 PERIOD OF PERFORMANCE

Base Year 4/14/2025 - 4/13/2026 Option Year 1 4/14/2026 - 4/13/2027 Option Year 2 4/14/2027 - 4/13/2028 Option Year 3 4/14/2028 - 4/13/2029

2.4 GOVERNMENT CONTACTS

a) All questions regarding the contract terms and conditions must be directed to the Contracting Officer, Stephen

Tees.

Contracting Officer (CO) Stephen Tees

USDA, APHIS, MRPBS, AAMD

250 Marquette Avenue, Suite 410 Minneapolis, MN 55401 Email: Stephen.Tees@usda.gov

2.5 INVOICES AND PAYMENT INFORMATION

a) The USDA, APHIS uses the Invoice Processing Platform (IPP) for electronic submission and tracking of invoices and payment information to its suppliers of goods and services. Invoices must be submitted electronically to the IPP invoicing system. The contractor must enroll at https://ipp.gov

b) Invoices must be prepared in accordance with 52.212-4 (g) and submitted in arrears.

c) Advance payment is not authorized.

PART 3.0 – CONTRACT CLAUSES

CLAUSES INCORPORATED BY REFERENCE

NAME TITLE DATE

52.204-13 System for Award Management Maintenance (Oct 2018) 52.204-18 Commercial and Government Entity Code Maintenance (Aug 2020) 52.212-4 Contract Terms and Conditions—Commercial Products and (Nov 2023)

Commercial Services 52.223-2 Reporting of Biobased Products Under Service and Construction (May 2024)

Contracts 52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Mar 2023)

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders — Commercial Products and Commercial Services (Jan 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C.

3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

X (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L.

109-282) (31 U.S.C. 6101 note).

__ (6) [Reserved].

__ (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div.

C).

__ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

X (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

__ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) ( Pub. L. 115–390, title II).

X (11) (i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) (Pub.

L. 115–390, title II).

__ (ii) Alternate I (Dec 2023) of 52.204-30.

X (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Jan 2025) (31 U.S.C. 6101 note).

__ (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

__ (14) [Reserved].

__ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C. 657a).

X (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (17) [Reserved]

__ (18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-6.

__ (19) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-7.

__ (20) 52.219-8, Utilization of Small Business Concerns (Jan 2025) (15 U.S.C. 637(d)(2) and (3)).

__ (21) (i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Nov 2016) of 52.219-9.

__ (iii) Alternate II (Nov 2016) of 52.219-9.

__ (iv) Alternate III (Jun 2020) of 52.219-9.

__ (v) Alternate IV (Jan 2025) of 52.219-9.

__ (22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

__ (ii) Alternate I (Mar 2020) of 52.219-13.

__ (23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 637s).

__ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)).

__ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024) (15 U.S.C. 657f).

X (26) (i) 52.219-28, Postaward Small Business Program Rerepresentation (Jan 2025) (15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (Mar 2020) of 52.219-28.

__ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

__ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)).

__ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)).

__ (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15 U.S.C. 637(a)(17)).

X (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

__ (32) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2025)( E.O. 13126)

X (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

X (34) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

__ (ii) Alternate I (Feb 1999) of 52.222-26.

__ (35) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

__ (ii) Alternate I (Jul 2014) of 52.222-35.

X (36) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

__ (ii) Alternate I (Jul 2014) of 52.222-36.

__ (37) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

__ (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

X (39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (40) 52.222-54, Employment Eligibility Verification (Jan 2025) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

__ (41) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (May 2024) (42 U.S.C. 7671, et seq.).

__ (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (May 2024) (42 U.S.C. 7671, et seq.).

X (44) 52.223-20, Aerosols (May 2024) (42 U.S.C. 7671, et seq.).

X (45) 52.223-21, Foams (May 2024) (42 U.S.C. 7671, et seq.).

__ (46) 52.223-23, Sustainable Products and Services (May 2024) (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C.

6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

__ (47) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (Jan 2017) of 52.224-3.

__ (48) (i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

__ (ii) Alternate I (Oct 2022) of 52.225-1.

__ (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501- 4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I [Reserved].

__ (iii) Alternate II (Dec 2022) of 52.225-3.

__ (iv) Alternate III (Feb 2024) of 52.225-3.

__ (v) Alternate IV (Oct 2022) of 52.225-3.

__ (50) 52.225-5, Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

__ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

__ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C.

5150).

__ (55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (May 2024) (E.O.

13513).

__ (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

__ (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

__ (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

X (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) (31 U.S.C. 3332).

__ (60) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).

__ (61) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

__ (62) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

__ (63) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C. 637(d)(13)).

__ (64) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C.

55305 and 10 U.S.C. 2631).

__ (ii) Alternate I (Apr 2003) of 52.247-64.

__ (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

X (1) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter67).

X (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) (29U.S.C.206 and 41 U.S.C. chapter 67).

__ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

__ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

X (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

X (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

__ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1), in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause-

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509).

(ii) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712).

(iii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iv) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

(v) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(vi) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328).

(vii) (A) 52.204–30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) (Pub. L.

115–390, title II).

(B) Alternate I (Dec 2023) of 52.204–30.

(viii) 52.219-8, Utilization of Small Business Concerns (Jan 2025) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ix) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(x) 52.222-26, Equal Opportunity (Sep 2015) (E.O.11246).

(xi) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

(xii) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

(xiii) 52.222-37, Employment Reports on Veterans (Jun 2020) (38 U.S.C. 4212).

(xiv) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O.

13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xv) 52.222-41, Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67).

(xvi) (A) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O 13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xvii) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) (41 U.S.C. chapter 67).

(xviii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services-Requirements (May 2014) (41 U.S.C. chapter 67).

(xix) 52.222-54, Employment Eligibility Verification (Jan 2025) ( E.O. 12989).

(xx) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

(xxi) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

(xxii) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xxiii) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

(xxiv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) (42 U.S.C. 1792).

Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxv) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C.

3903 and 10 U.S.C. 3801). Flow down required in accordance with paragraph (c) of 52.232-40.

(xxvi) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) (46 U.S.C.

55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.217-9 Option to Extend the Term of the Contract (Mar 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days;

provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 30 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 4 years.

(End of clause)

52.252-2 Clauses Incorporated by Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/

AGAR 452.204-70, Modification for Contract Closeout (DEVIATION JULY 2022)

Upon contract closeout for contracts utilizing Simplified Acquisition Procedures (SAP) according to FAR Part 13.

(a) If unobligated funds in the amount of $1000 or less remain on the contract, the Contracting Officer (CO) shall issue a unilateral modification for deobligation. The contractor will receive a copy of the modification but will not be required to provide a signature. The CO shall immediately proceed with contract closeout upon completion of the period of performance, receipt and acceptance of supplies or services, and final payment.

(b) If unobligated funds of more than $1000 remain on the contract, the CO shall issue a bilateral modification for deobligation. The contractor will receive a copy of the modification and will be required to provide a signature. (The CO may also request a Release of Claims be completed by the contractor, although not required for contract and orders using SAP.) If the bilateral modification and Release of Claims are not returned to the CO within 60 days, the CO shall release the modification as unilateral and proceed with contract closeout upon completion of the period of performance, receipt and acceptance of supplies or services, and final payment.

PART 4.0 – PROVISIONS

PROVISIONS INCORPORATED BY REFERENCE

NAME TITLE DATE

52.204-7 System for Award Management (Nov 2024) 52.204-16 Commercial and Government Entity Code Reporting (Aug 2020) 52.212-1 Instructions to Offerors—Commercial Products and Commercial (Sep 2023)

Services 52.223-1 Biobased Product Certification (May 2024)

PROVISIONS INCORPORATED BY FULL TEXT

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v)(2)(i) of the provision at 52.212- 3, Offeror Representations and Certifications-Commercial Products or Commercial Services.

The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision—

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to—

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) ( https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(d) Representation. The Offeror represents that—

(1) It □ will, □ will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation.

The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that—

It □ does, □ does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment—

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services—

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.204-26 Covered Telecommunications Equipment or Services-Representation (Oct 2020)

(a) Definitions. As used in this provision, "covered telecommunications equipment or services" and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) ( https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

(c) (1) Representation. The Offeror represents that it □ does, □ does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it □ does, □ does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

(End of provision)

52.212‐1 ADDENDUM

Provision 52.212‐1 Instructions to Offerors – Commercial Items – September 2023 is replaced in its entirety by this addendum.

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the solicitation.

However, the small business size standard for a concern that submits an quote, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition—

(1) Is set aside for small business and has a value above the simplified acquisition threshold;

(2) Uses the HUBZone price evaluation preference regardless of dollar value, unless the quoter waives the price evaluation preference; or

(3) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(b) Submission of Quotes. Submit quotes to Stephen Tees at Stephen.Tees@usda.gov at or before the date/time specified in this solicitation. See Part 1.1 SCHEDULE NOTES & INSTRUCTIONS TO CONTRACTORS for quotation submission requirements.

(c) Quote Term. Quotations shall be valid for at least 30 calendar days from the date specified for receipt of quotations, unless another time period is specified in the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotes. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender’s request and expense, unless they are destroyed during preaward testing.

(e) Multiple Quotations. Quoters are encouraged to submit multiple quotations for satisfying the requirements of this solicitation. Each quote submitted will be evaluated separately.

(f) Submission deadline. Quotes must be received by the date and time specified in this solicitation. A late quote will not be considered unless it is received before award is made and the Contracting Officer determines that accepting the late quote would not unduly delay the acquisition. In the case of an emergency or unanticipated event that delays Government operations so that quotes cannot be received, the deadline will be extended by one working day.

(g) Contract Award. Quotations should contain the quoter’s best technical and price terms. The Contracting Officer may reject any or all quotations. The Contracting Officer may award to other than the quoter with the lowest priced quotation.