11a_CDRL_FAT.pdf
PDF 81 KB Posted
- Attached to
- F-15 One Way Transfer Federal contract opportunity
- Solicitation number
- FA821324R3002
About this file
This Contract Data Requirements List (CDRL) outlines testing and reporting requirements for a first article inspection report related to the production of an air munition. It requires the contractor to submit dimension and tolerance data, material certification information, and identification marking verification for the item. The report must be certified by the DCMA quality assurance representative. The electronic receiving report and first article test report shall be submitted through the Wide Area Workflow system no later than 30 days after testing completion. Distribution of the test report is limited to U.S. government agencies.
This CDRL appears to be associated with solicitation FA821324R3002 for a one-way transfer of F-15 components from the contractor to the Department of the Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base. No further pricing, response date, or award date details are provided in the available documents.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA821324R3002.pdf | ||
| 01_AIR_SPEC.pdf | ||
| 04_REPSHIP.docx | DOCX document | |
| 05_SOW_Packaging.pdf | ||
| 11b_CDRLs_No_FAT.pdf | ||
| 02_ADC_SOW.docx | DOCX document | |
| 06a_SPI_F011676621.pdf | ||
| 07_ES7034_Rework_Repair.docx | DOCX document | |
| 08_JQRS.pdf | ||
| 03_CADPAD_Item_Marking_Instruction.pdf | ||
| 09a_Item_Description_1377011676621ES.pdf | ||
| 09b_Item_Description_1377012203746ES.pdf | ||
| 10a_EDL_1377011676621.pdf | ||
| 10b_EDL_1377012203746.pdf | ||
| 06b_SPI_F012418149.pdf |
Show all 15
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP TM OTHER NDTI
D. SYSTEM/ITEM
1377012203746*
E. CONTRACT/PR NO.
FD2020-24-50007
F. CONTRACTOR
1. DATA ITEM NO.
B001
2. TITLE OF DATA ITEM
Test Procedure
3. SUBTITLE
First Article Inspection Report, Contractor Test
4. AUTHORITY (Data Acquisition Document No.)
DI-NDTI-80603A
5. CONTRACT REFERENCE
Airmunition Specification
6. REQUIRING OFFICE
AFLCMC/EBHJ
7. DD 250 REQ
SD
9. DIST STATEMENT
REQUIRED
B
10. FREQUENCY
1TIME
12. DATE OF FIRST SUBMISSION
BLK 16
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
8. APP CODE
N/A
11. AS OF DATE
BLK 16
13. DATE OF SUBSEQUENT
SUBMISSION
ASREQ
Draft
Final
Reg Repro
16. REMARKS
BLK 4: Contractor's format required. Follow content preparation instructions per the Data Item Description. Incorporate the following applicable requirements:
a. Dimension and tolerances specified on the manufacturing data shall be listed in one column with the actual corresponding reading obtained from inspection of the part, listed in another column.
b. Material utilized in the manufacture of "First Article" item shall be identified and certified as conforming to applicable data requirements.
c. Certification that identification markings, i.e. part number per MIL-STD-130 and Federal Supply manufacturer (FSCM) per H4-1 Cataloging Handbook (if applicable) have been complied with.
e. The test report will be certified by the responsible DCMA/QAR.
(Authorization for any deviations from the requirements specified by the manufacturing data must be obtained from the procuring agency prior to inclusion in the test report).
BLK 7: The electronic receiving report shall be annotated with the Lot Number, National Stock Number, and Nomenclature. Electronic receiving report required via internet Wide Area Work Flow (WAWF) at https://wawf.eb.mil.
BLK 9: DISTRIBUTION STATEMENT B. Distribution authorized to U.S.
Government agencies (CTI) (Date of Contract Award). Other requests for this document must be referred to AFLCMC/EBHJ.
WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Section 2751 of Title 22, U.S.C.) or the Export Control Reform Act of 2018 (Chapter 58 Sections 4801-4852 of Title 50 U.S.C). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with the provisions of DoD Directive 5230.25 and DoD Instruction 2040.02
BLK 12: Submit no later than 30 days after completion of First Article Acceptance Testing. Submit through WAWF under DoDAAC FA8213.
*1377011676621.
FOB DESTINATION
EBH 23-156-001
Terry McCurdy/AFLCMC/EBHEC, 586-0535
WAWF 0 1 0
DoDAAC, FA8213
15. TOTAL 0 1 0
G. PREPARED BY
mccurdy.terry.d.1075978215
H. DATE
2023/06/05
I. APPROVED BY
morgan.robert.wesley.jr.1158190040
J. DATE
2023/06/05
18. ESTIMATED
TOTAL PRICE
DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 1 of 1 Pages
17. PRICE GROUP
File details come from the government source that posted it. Updated .