1-ODOT_Leica_and_Maintenance_Rates_2025.pdf
PDF 479 KB Posted
- Attached to
- Competitive Selection OH|DOT17125-1
- Contract number
- DOT17125-1
- Issued by
- Ohio
About this file
This document appears to be a service and maintenance pricing sheet from Leica Geosystems for various surveying and mapping instruments, specifically detailing maintenance services for Leica MS 50/60 total stations, LS 10/15 digital levels, and GNSS receivers and controllers. While the document does not explicitly reference a specific state or local contract, it provides detailed pricing and service options for different levels of equipment maintenance.
The document outlines two maintenance service levels for the Leica MS 50/60: Extended Maintenance at $3,496.00 for labor and approximately $400 in parts, and Standard Service at $1,748.00 for labor and approximately $200 in parts. Labor rates are consistently $184 per hour. Similar pricing structures are provided for LS 10/15 Digital Levels (labor costs of $489 or $652 depending on service level) and GNSS receivers/controllers, which are noted to typically require 2-4 hours of maintenance at $184 per hour. Both maintenance levels include comprehensive services such as incoming and outgoing inspections, cleaning, adjustments, firmware updates (with a valid software maintenance contract), and issuance of a calibration certificate.
View the file
Other files
Show all 17
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Leica
Leica MS 50/60
Leica Service & Maintenance
-Incoming inspection -Circle cleanliness inspection and determining new array tables -Cleaning of circle (if necessary) -Cleaning and greasing of focusing system, standing axis, and tilting axis -Cleaning of piezo drives (Hz/V) -Cleaning of Hz slip ring -Cleaning and greasing of drive knobs -Replacing all gaskets -Adjustment of theodolite, EDM, tilt sensor, ATR and motors -Adjustment of PS, EGL, OVC and OAC if applicable -Determining of vertical, length and traverse index -Determining/adjusting of Hz collimation error -Determining/adjusting of tilting axis error -Determining of ATR zero point -Determining of OAC zero point (if applicable) -Installation of latest firmware & applications (if valid software maintenance contract exists) -Check/Determining EDM additive constant -Outgoing inspection -Cleaning of instrument and accessories -Calibration Certificate
Extended Maintenance
Labor $3496.00 Parts $400 roughly, depending on condition Labor is $184 per hour TS50/MS50 Extended Maintenance:
-Incoming inspection -Circle cleanliness inspection -Cleaning of circle (if necessary) -Cleaning and greasing of drive knobs -Cleaning and greasing of focusing system (if necessary) -Inspecting & adjusting of laser beam paths (IR/RL EDM, ATR) -Inspecting & adjusting of laser beam paths (EGL, PS) if applicable -Inspecting of OVC and OAC (if applicable) -Determining of vertical, length and traverse index -Determining/adjusting of Hz collimation error -Determining of tilting axis error -Determining of ATR zero point -Determining of OAC zero point (if applicable) -Installation of latest firmware & applications (if valid software maintenance contract exists) -Check/Determining EDM additive constant -Outgoing inspection -Cleaning of instrument and accessories -Calibration Certificate
Standard Service
Labor $1748.00 Parts $200 roughly, depending on condition Labor is $184 per hour TS50/MS50 Std. Maintenance:
Leica MS 50/60
LS 10/15 Digital Levels Labor $489/$652 plus any needed parts, depending on condition Labor is $163 per hour
LS10/15 Standard/Extended Maintenance:
-LS10/15 Standard Maintenance:
--Incoming inspection --Cleaning and greasing of standing axis (if necessary) --Adjusting bulls-eye bubble and visual line-of-sight --Installation of latest firmware & applications (if -valid software maintenance contract exists) --Adjust all necessary electronical adjustments --Mechanical adjustment of factor flow and CCD- Array (if necessary) --Outgoing inspection --Cleaning of instrument and accessories --Calibration Certificate
GS 14, GS 16, GS 18t, GS18i GNSS receivers CS 20, CS30, CS 35 Controllers
GS/CS the same basic function. These are almost never shipped in for maintenance, just repairs.
2 to 4 hours at $184 per hour CS20 Standard Maintenance:
-Incoming inspection -Functional test (ports, CF card, LEDs) -Installation of latest firmware & applications (if valid software maintenance contract exists) -Outgoing inspection -Cleaning of instrument and accessories -Certificate Blue
LS10/15 Extended Maintenance:
-Incoming inspection -Cleaning and greasing of focusing system (if necessary) -Cleaning and greasing of standing axis (if necessary) -Replacing all gaskets -Adjusting bulls-eye bubble and visual line-of-sight -Carry out all adjustments -Installation of latest firmware & applications (if valid software maintenance contract exists) -Outgoing inspection -Cleaning of instrument and accessories -Calibration Certificate
| Blank Page |
| Blank Page |
File details come from the government source that posted it. Updated .