0618-02 - Barge Shock Test - DWG 5038599 EASU Assembly.pdf

NOTES:

1.

3.

4.

5.

6.

UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES.

LOCATION TO BE DETERMINED AT INSTALLATION.

DENOTES CENTER OF GRAVITY AND IS A CALCULATED LOCATION.

DIMENSIONS ARE REFERENCE UNLESS TOLERANCE IS SPECIFIED.

UNIT HULL FOUNDATION SHALL BE DESIGNED, MANUFACTURED, AND

BONDING AND GROUNDING SHALL BE IN ACCORDANCE WITH MIL-STD-1310.

INSTALLED TO COMPLY WITH SHOCK AND VIBRATION REQUIREMENTS

LISTED IN DATA TABULATION TABLE.

7. LENGTH TO BE DETERMINED BY INSTALLING ACTIVITY.

8. THIS EQUIPMENT SHALL BE MOUNTED IN A LOCATION EXPOSED TO

THE WEATHER.

9.

2.

THERE ARE NO CRITICAL REQUIREMENTS FOR LEVELING OF THE EQUIPMENT

OR FOUNDATION. FLATNESS AND STANDARD PRACTICES OF THE INSTALLING

ACTIVITY SHALL BE USED.

DAHLGREN, VA., CBR DEFENSE DIVISION.

REFERENCES:

DRAWING 5038596.

1.

2.

DRAWING LIST - SEE DRAWING 5038593.

IPDS-LR

EXTERNAL AIR SAMPLING UNIT ASSEMBLY

OUTLINE AND INSTALLATION

DATA TABULATION

WEIGHT

DIMENSIONS

VOLUME

CRATED

INSTALLED

CRATED

INSTALLED

CRATED

INSTALLED

SHIPPING CONTAINERS

MANUFACTURER'S PART No.

POWER REQUIREMENTS - MIL-STD-1399 SECTION 300

SOURCE

TYPE

POWER

VOLTS

FREQUENCY

CURRENT

PHASE

POWER FACTOR

HEAT DISSIPATION

OPERATING TEMP.

STORAGE TEMP.

RELATIVE HUMIDITY

SHOCK REQT.

VIBRATION REQT.

ENCLOSURE MATERIAL

MOUNTING SURFACE

GROUND SURFACE

NOTE 13

11.133

MIL-S-901D, GRADE A, CLASS I

MIL-STD-167-1, TYPE I

TABLE I

DENOTES MAINTENANCE AND/OR OPERATIONAL CLEARANCES.

N/A

THIS EQUIPMENT IS DESIGNED TO WITHSTAND GRADE A SHOCK, IAW MIL-STD-810E,

MIL-STD-901D AND MEETS THE VIBRATION REQUIREMENTS OF MIL-STD-167/1 (TYPE).

10.

ENSURE ALL SERVICES AREAS ARE MAINTAINED AND EQUIPMENT IS MOUNTED

TO MEET GRADE "A" SHOCK REQUIREMENTS.

11.

NOTE 13

18.00" X 7.992" X 6.513"

NOTE 13

0.054 CU FT

NOTE 13

271120

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

0 C TO 50 C

LEGEND:

TBD - TO BE DETERMINED

EMI - ELECTROMAGNETIC INTERFERENCE

IAW - IN ACCORDANCE WITH

C - DEGREES CELSIUS

12. INTERPRET DRAWING IAW ASME Y14.100, AND MIL-D-23140D (NAVY).

DENOTES BULKHEAD CUTOUT.

DENOTES SHIPS BULKHEAD.

-20 C TO 52 C

5% TO 95%

13.

THE IPDS-LR SYSTEM COMPONENTS ARE CRATED IN ONE PACKAGE. THE SYSTEM

CRATE SPECIFICATIONS ARE AS FOLLOWS:

WEIGHT: 450 LBS

DIMENSIONS: 46" X 45" X 32"

VOLUME: 38.33 CU FT

TABLE II

QTY

NAME

MOUNTING HARDWARE TABULATION

PART No.

GASKET, EASU

BULKHEAD MOUNT, EASU

HEXHDMS - HEX HEAD MACHINE SCREW

STAINLESS STEEL

NOTE 14

N/A

14. THE IPDS-LR SYSTEM COMPONENTS MOUNTING MATERIALS ARE AS FOLLOWS:

1. EASU ASSEMBLY - STAINLESS STEEL ALLOY

2. EASU GASKET - AUTOMOTIVE RUBBER PER ASTM D 2000 M1BF607

3. EASU MOUNTING PLATE - ALUMINUM / MAGNESIUM ALLOY

15.

AIR INLET AND OUTLET LINES THAT CONNECT EASU WITH DETECTOR UNIT ARE

72 INCHES. EASU IS TO BE MOUNTED ABOVE DETECTOR UNIT, WITHIN A

DISTANCE THAT ALLOWS CONNECTION OF AIR INLET AND OUTLET LINES.

A. NEW SHIP CONSTRUCTION: THIS CONFIGURATION TO BE USED FOR SHIPS

THAT DO NOT HAVE A WEATHER DECK SO THE EASU'S CAN BE ACCESSED

FROM INTERIOR OF SHIP FOR MAINTENANCE.

B. NEW SHIP CONSTRUCTION: IPDS-LR EASU INLET SHALL BE LOCATED WITHIN

FOUR FEET OF DU INLET.

C. FOR INSTALLATIONS WHERE IPDS-LR IS REPLACING EXISTING IPDS: THE

DISTANCE BETWEEN EASU INLET AND DU INLET MAY BE UP TO SIX FEET TO

ACCOMODATE POSSIBLE REUSE OF EXISTING FOUNDATIONS.

AT NSWCDD, DAHLGREN, VA., CBR DEFENSE DIVISION.

3.

DRAWING REVIEWED BY SYSTEM LEAD

DRAWING APPROVED BY PROGRAM ENGR

DRAWING APPROVED FOR COMNAVSEA

WASHER, FLAT 3/8 - CRES

MYLON-INSERT LOCKNUTS, 3/8"-16 - CRES

16.

EASU INLET & OUTLET SUBASSEMBLIES SHOWN ON SHEET 3.

NOTES:

1.

3.

4.

5.

6.

UNLESS OTHERWISE SPECIFIED ALL DIMENSIONS ARE IN INCHES.

LOCATION TO BE DETERMINED AT INSTALLATION.

DENOTES CENTER OF GRAVITY AND IS A CALCULATED LOCATION.

DIMENSIONS ARE REFERENCE UNLESS TOLERANCE IS SPECIFIED.

UNIT HULL FOUNDATION SHALL BE DESIGNED, MANUFACTURED, AND

BONDING AND GROUNDING SHALL BE IN ACCORDANCE WITH MIL-STD-1310.

INSTALLED TO COMPLY WITH SHOCK AND VIBRATION REQUIREMENTS

LISTED IN DATA TABULATION TABLE.

7. THIS EQUIPMENT SHALL BE MOUNTED IN A LOCATION EXPOSED TO

THE WEATHER.

8.

2.

THERE ARE NO CRITICAL REQUIREMENTS FOR LEVELING OF THE EQUIPMENT

OR FOUNDATION. FLATNESS AND STANDARD PRACTICES OF THE INSTALLING

ACTIVITY SHALL BE USED.

DAHLGREN, VA., CBR DEFENCE DIVISION.

REFERENCES:

DRAWING 5038596.

1.

2.

DRAWING LIST - SEE DRAWING 5038593.

IPDS-LR

EXTERNAL AIR SAMPLING UNIT ASSEMBLY

OUTLINE AND INSTALLATION

DENOTES MAINTENANCE AND/OR OPERATIONAL CLEARANCES.

THIS EQUIPMENT IS DESIGNED TO WITHSTAND GRADE A SHOCK, IAW MIL-STD-810E,

MIL-STD-901D AND MEETS THE VIBRATION REQUIREMENTS OF MIL-STD-167/1 (TYPE).

9.

ENSURE ALL SERVICES AREAS ARE MAINTAINED AND EQUIPMENT IS MOUNTED

TO MEET GRADE "A" SHOCK REQUIREMENTS.

10.

LEGEND:

TBD - TO BE DETERMINED

EMI - ELECTROMAGNETIC INTERFERENCE

IAW - IN ACCORDANCE WITH

C - DEGREES CELSIUS

11. INTERPRET DRAWING IAW ASME Y14.100, AND MIL-D-23140D (NAVY).

DENOTES BULKHEAD CUTOUT.

DENOTES SHIPS BULKHEAD.

12. ITEMS 45, 46, 47 ARE ONLY SUPPLIED WHEN SHIPS CONFIGURATION REQUIRES

INSTALLATION AS SHOWN ON SHEET 1.

A) WHEN CONFIGURATION IS REQUIRED, ITEM 5 & 6 FROM REF 2 WILL BE

DELIVERED ASSEMBLED ON ITEM 45 USING ITEMS 46 & 47.

TABLE I

QTY

NAME

MOUNTING HARDWARE TABULATION

PART No.

5975-12-400-3459

HEXHDMS - HEX HEAD MACHINE SCREW

AT NSWCDD, DAHLGREN, VA., CBR DEFENCE DIVISION.

3.

5340-12-400-3642

5340-12-400-3369

5330-01-464-1864

45330-12-400-4850

5305-12-400-3218

5310-12-390-3805

6665-12-389-0803

6665-12-389-0889

4720-12-389-1119

4720-12-389-0526

5340-12-389-0820

5305-12-400-3217

5310-12-390-3805

13.

ITEMS 39, 40, 35, 38, 34, 37 MAKE UP EASU INLET ASSEMBLY, ITEM 5 ON REF2.

THESE WILL BE DELIVERED PRE-ASSEMBLED.

14.

ITEMS 39, 40, 36, 38, 34, 37 MAKE UP EASU OUTLET ASSEMBLY, ITEM 6 ON REF 2.

THESE WILL BE DELIVERED PRE-ASSEMBLED.