03520628-01354-ASTM-A-276 Stainless Steel bars and shapes.docx

MATERIAL ORDERING DATA

ASTM-A-276

IDN: N4523A 0352-0628

ICN: 38J0158101 KO: F03 KOI: 007

Paragraph 3.1 Ordering data

3.1. ASTM-A-276, Standard Specification for Stainless Steel Bars and Shapes, dated 01 May 2016

3.1.1 Quantity required (weight or number of pieces): 1

3.1.2 Name of material: Stainless Steel

3.1.3 Form (bars, angles, etc.): ROUND BAR

3.1.4 Condition: A-Annealed

3.1.5 Finish (Section 8 of Specification A 484/A 484M):

3.1.6 Surface preparation of shapes (Section 8 of Specification A 484/A 484M), A484

3.1.7 Dimensions

3.1.8 Cross section (round, square, etc.): ROUND

3.1.9 Type or UNS designation (see Table 1 Chemical Requirements) S21800

3.1.10 ASTM designation ASTM A276/A276M-17, date of issue 3/15/2017 and

3.1.11 Bars to be .

3.1.12 Test for magnetic permeability:

3.1.13 Choice of testing track from the options listed in Test Methods A1058 when material is ordered to an M suffix (SI units) product standard. If the choice of test track is not specified in the order, then the default ASTM track shall be used as noted in Test Methods A1058.

3.1.14 Supplementary requirements: Shall machine the Forgings to the following dimension:

Minimum 18" Diameter x 17" Long

3.1.15 Additional requirements: Round Bar, NITRONIC 60, 18" Diameter 17" Long Material Specification: ASTM A276, S21800, 50 KSI Minimum Yield

NOTE—4—Atypical ordering description is as follows: 5000 lb [2270 kg] Stainless Steel Bars, Annealed and Centerless Ground, 11⁄2 in. [40 mm] Round, 10 to 12 ft [3 to 3.7 m] in length, Type 304, ASTM Specification A276/A276M dated ______. End use: machined valve parts.

Prepared By: Susan Trezise Code: C/127.2 p 1 of 1