0302 Repair Description.pdf

PDF 10 KB Posted

Attached to
Amplifier, Radio Frequency; Amplifier, Power Supply
Solicitation number
70Z08521Q39031B00
Issued by

View the file

Other files

File Type Posted
70Z08521Q39031B00 RFQ.pdf PDF
FAR CLAUSES.pdf PDF
Sole_Source_JOTFOC.pdf PDF
2121401B4200RJ052_REPAIR SPECS.doc DOC document
3771 Repair Description.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

OVERHAUL DESCRIPTION

FOR OFFICIAL USE ONLY

ITEM NAME AMPLIFIER,RADIO FREQUENCY

STOCK NUMBER 5996-01-581-0302

PART NUMBER 34000-1

USED ON WMSL AN/SRC-63(V), UHF EXTERNAL COMMUNICATIONS SYS

Items as received by the contractor must be complete and of the proper cited part number. Discrepancies shall be reported to the Coast Guard Contracting Officer.

OVERHAUL REQUIREMENTS:

NIIN: 01-581-0302

PN: 34000-1

ITEM: AMPLIFIER,RADIO FREQUENCY

CAGE: 06GW1

OEM: MILPOWER

QTY PER HUL: 1

ESTIMATED LEAD TIME: 3 MONTHS

SPECS:

LENGTH 23.750 INCHES NOMINAL

HEIGHT 3.500 INCHES NOMINAL

WIDTH 19.000 INCHES NOMINAL

WEIGHT = 47.0 LBS

INCLOSURE TYPE: ENCASED

INSTALLATION DESIGN: RACK

REPAIR REQUIREMENTS: REFER TO REPAIR SPECS DOCUMENT; A COPY WILL BE PROVIDED

TO THE OEM BY THE KS / KO

PACKAGING SPECS:

1.) REFERENCE MIL-STD-20731E DOC; METHOD 10. PACKAGING SHOULD BE APPROPRIATE

TO PART SIZE, WEIGHT, AND MUST WITHSTAND MULTIPLE WORLDWIDE SHIPMENTS IN

VARIOUS SHIPPING CONDITIONS / CLIMATES. PART MUST BE APPROPRIATELY SECURED,

AND CUSHIONED BY FOAM OR BUBBLE WRAP TO PREVENT EXCESSIVE MOVEMENT AND DAMAGE

DURING SHIPPING.

1.A) ELECTROSTATIC DISCHARGE (ESD) ITEMS TO COMPLY WITH METHOD 41, PARAGRAPH

3.7, 5.2.4.1 & TABLE J-IA IAW MIL-PRF-81705E **ONLY IF** APPLICABLE TO PART

2.) INDIVIDUALLY PACKAGED AND LABELED IAW MIL-STD-129P CH.4, REQUIRED ID

MARKING EX: PAR 4.1 FIGURE 1, MARKINGS SHALL COMPLY WITH PACK TYPE /

MATERIALS AS REFERENCED IN DOCUMENT. LABELS: IAW MIL-STD-129P W/ CHANGE 4,

PAR 4.1 IDENTIFICATION MARKINGS (PG.21).

2.A) VISIBLY MARK / LABEL ALL ELECTRONIC EQUIPMENT WITH "STORE INDOORS ONLY"

WARNING. ITEMS THAT ARE NOT INDIVIDUALLY PACKAGED, AND / OR LABELED WITH THE

REQUIRED FORMAT WILL BE RETUREND TO THE VENDOR FOR REPACKAGING.

END USE: WMSL EXTERIOR UHF COMMS

WARRANTY:

X A. Standard Manufacturer's Warranty

B. Item being repaired as an "onboard repair" or a "system stock" item

SHELF LIFE CD 0

B. Item being repaired as an "onboard repair" or a "system stock" item and will be put into inventory. NOT FOR IMMEDIATE INSTALLATION.

Contractor must guarantee item against defects that lead to failure for days after installation for a period of up to two (2) years after delivery to Coast Guard.

GOVERNMENT ACCEPTANCE:

Acceptance will be made at destination by a Government representative.

Acceptance will be contingent upon the representative's verification of no damage in transit, correctness and completeness of order and contractor's conformance to preservation/packaging, packing and marking requirements.

OVERHAUL DESCRIPTION

PACKAGING AND MARKING FOR SHIPMENT:

X

A. Each unit shall be packed individually in it's own wooden box which shall be capable of providing adequate protection to the item during multiple shipments. Mark each box in legible black print lettering with the following information:

NATIONAL STOCK NUMBER

ITEM NAME

PART NUMBER

GOVERNMENT ORDER NUMBER

5996-01-581-0302

AMPLIFIER,RADIO FREQUENCY

34000-1

PRESERVATION / PACKAGING:

A. Each unit shall be individually preserved and wrapped for protection against deterioration for a period of two (2) years minimum.

X B. See Attachments

B. See Attachments

And the words: "Coast Guard SFLC Material, Condition "A"

File details come from the government source that posted it. Updated .