024-26.pdf

Invitation No. 024-26

ITB 024-26 Polyethylene and Fiberglass Stationary Liquid Storage Tanks

REQUIREMENTS/SPECIFICATIONS

Section 1: Intent

The purpose of this invitation to bid is to establish a term contract for polyethylene and fiberglass vertical storage tanks in compliance with the specifications, requirements, and ODOT’s standard terms and conditions contained herein.

Section 2: Multiple Award

ODOT will accept all responsive bids submitted on or before the specified bid opening date and make an award to all responsive bidders pursuant to O.R.C. 5513.02.

Section 3: Shipping Charges

The shipping charge will be calculated by adding a flat rate per load charge from the vendor location to the ordering ODOT facility. The flat rate is calculated per load and shall not be construed as a per tank rate. A per loaded mile charge will be applied when applicable (see pricing page), Deliveries will be made to any of ODOT’s facility locations, which are within ODOT’s twelve (12) Districts and eighty-eight (88) counties in the State of Ohio, as per the enclosed map. The flat rate per load and the charge per loaded mile should be submitted on the Department’s Microsoft Excel file.

NOTE: Purchase orders when issued, will detail specific destination points. ODOT also reserves the option to pick up tanks at the vendor’s location at no shipping cost to the state.

ODOT DISTRICT HQ LOCATIONS

District 1 - Lima District 7- Sidney

District 2 - Bowling Green District 8 - Lebanon

District 3 - Ashland District 9 - Chillicothe

District 4 - Akron District 10 - Marietta

District 5 - Jacksontown District 11 - New Philadelphia

District 6 - Delaware District 12 - Garfield Heights

Central Garage - Columbus (CG)

Section 4: Delivery

Delivery shall be made within 30 calendar days upon written or verbal notification against a valid State of Ohio purchase order.

Vendors shall contact ODOT two (2) business days in advance of delivery, to coordinate the delivery date and time of the tank(s).

All deliveries shall occur, and be off-loaded, between the hours of 8:00 a.m. and 3:30 p.m., Monday through Friday, excluding State holidays, unless special permission is granted by the Department to temporarily waive or adjust this requirement.

Section 5: Contract Duration

The effective duration of this agreement shall be from February 1, 2025 through January 31, 2026.

Section 6: Bidder Information

Bidders should identify on the Department’s provided Microsoft Excel file locations where orders will be placed and tanks are to be furnished from. Include the name of an individual responsible for taking the orders and their telephone numbers. If you have more than one location from which you can supply tanks at the price quoted, please identify them. This information will be provided in the pricing page found at the link listed on the front page of the ITB.

Section 7: Specifications for Chloride Stationary Liquid Vertical Storage Tanks

7.1 The General Polyethylene Vertical Tank Specifications are applicable to all sized tanks:

• Material of Construction shall be high density linear polyethylene, one-piece seamless construction, rated for specific gravity of 1.9, with UV stabilizers to prevent degradation from sunlight exposure.

• Manway shall be at least 16" with vented lid, offset to the edge of tank for easy access.

• Outlet shall be Bulkhead type with single hole through tank wall, 2" FNPT or 3" FNPT, polypropylene or 316 Stainless Steel, double flange bolted fitting, EPDM gasket, double thread with poly siphon tube for tank drainage. The 2" FNPT or 3" FNPT fill port location will be specified at the time of order. Location of outlet shall be on the side of the tank, at or as near to the bottom of tank, per typical tank standards.

• A method for measuring quantity levels, such as graduations molded on the tank wall or adhesive strips or other methods, is to be provided for showing gallon capacity marks. These readings shall be visible on the outside of the storage tank. They shall be located directly above the outlet described above, or within two feet horizontally. If molded graduations are not within the two foot horizontal boundary, the vendor must be responsible for providing a second method for measuring quantity levels within this boundary.

• Tie down slots shall be molded in the tank top.

• The color shall be either Natural White or Light Blue.

• Tanks shall have a straight wall tank capacity of 2,000 gallons up to a maximum capacity of 20,000 gallons.

• Site Gauge Preparation and Accessories

• The storage tanks will typically contain clear liquids and the liquid levels may not be visible based on the physical makeup of the storage tanks.

• Provide a second polypropylene or 316 Stainless Steel, double flange bolted fitting. The size of the fitting will be determined at the time of order, and will be one of the following sizes: ¾”, 1”, 1 ¼”, or 1 ½” FNPT. This shall be located on the side of the tank, at or as near to the top, per typical tank standards, and directly above the location of the bottom outlet provided.

• Clear vinyl tubing shall be included as the site gauge.

• Include ball valve to close off bottom fitting and allow changes to sight gauge.

• Alternate site gauge configurations may be accepted.

7.2 The General Fiberglass Vertical Tank Specifications are applicable to all sized tanks:

• The tank shall be of linear Filament-wound construction and shall meet ASTM-D-3299-95, Type 1, Grade 1 or 2 resins treated for long term resistance to ultraviolet radiation, with an exterior gelcoat.

• The structure of each tank should be designed to store material with a specific gravity of 1.9.

• Tank shall be equipped with a minimum 24” man way and bolted cover approximately 36” from bottom of tank, Man way hardware to be Stainless Steel

• Construct by filament winding, without a bell and spigot joint in the sidewall

• Raw materials used in manufacturing should be that to support the environment of storing calcium chloride, magnesium chloride, and sodium chloride at an ambient temperatures and atmospheric pressure. The interior corrosion barrier should include a single layer of surfacing veil or C-Veil

• Provide commercial grade resins, corrosion resistant thermoset as recommended and manufactured by Ashland Chemical, Dow Chemical or approved equivalent

• Detailed drawing for the various sizes of tanks shall be provided with bid

• Tank shall include conical gusset supports with flanged diameter and drilling: ANSI B16.5 150 pounds on all nozzles smaller than 12” diameter, Flanged Nozzle installation to incorporate a 2" internal tank projection and a 6" external projection with nozzle attached to interior and exterior tank walls by means of secondary bonding

• The tank shall be equipped with 3-three inch fiberglass flanged nozzles for connection to the pump, One flange shall include a siphon tube reaching to within 1 inch of the bottom of the tank, to fully drain the tank for sediment removal, The second flange nozzle shall be located 48” directly above the first, to be used as a secondary suction port, The third flange nozzle shall be used to supply sparger system, Both lower flanges should be approximately 8 inches from bottom of tank

• Nozzles containing PVC, CPVC, and molded nozzles are not allowed

• Apply laminates and cutout reinforcements as required by ASTM D4097 and ASTM D3299

• The tank shall include 4” U-vent with screen,

• The finished surface of the tank shall be as free as commercially practical from visual defects such as foreign inclusions, air bubbles, pin holes, and craters, All cut edges shall be trimmed to have smooth edges, The tanks and installation shall exhibit good workmanship in all respects

• The tank shall have an external gallon gauge with gallon increments and wind protection.

Note 1000 gallon increments or less preferred.

• Site Gauge Preparation and Accessories

• The storage tanks will typically contain clear liquids and the liquid levels may not be visible based on the physical makeup of the storage tanks.

• Provide a second polypropylene or 316 Stainless Steel, double flange bolted fitting. The size of the fitting will be determined at the time of order, and will be one of the following sizes: ¾”, 1”, 1 ¼”, or 1 ½” FNPT. This shall be located on the side of the tank, at or as near to the top, per typical tank standards, and directly above the location of the bottom outlet provided.

• Clear vinyl tubing shall be included as the site gauge.

• Include ball valve to close off bottom fitting and allow changes to sight gauge.

• Alternate site gauge configurations may be accepted.

• The tank shall be supplied with a Sparger system (made of PVC) to prevent the settling of tank contents, System shall connect to one of the 3 inch flanged fitting, System shall be installed 8 inches above the tank bottom, Piping shall go outward in 4 evenly space directions from center of tank.

• 4 equally spaced tie down brackets at bottom of tank, Brackets shall be either galvanized or stainless steel for the purpose of anchoring directly to concrete pads

• Provide bulk storage tanks with a minimum of four total lifting lugs, two on the side and two on the top of the tank, Lugs shall be either galvanized or stainless steel

• A 6” hole in the top of the tank above the tabs, with a swivel lid with single bolt to secure

• ODOT will mount PVC pipe after delivery

• Outlet shall be Bulkhead type with single hole through tank wall, 2" FNPT or 3" FNPT, polypropylene or 316 Stainless Steel, double flange bolted fitting, EPDM gasket, double thread with poly siphon tube for tank drainage. The 2" FNPT or 3" FNPT fill port location will be specified at the time of order. Location of outlet shall be on the side of the tank, at or as near to the bottom of tank, per typical tank standards.

• The preferred colors are either Natural White or Light Blue.

• Tanks shall have a straight wall tank capacity of 2,000 gallons up to a maximum capacity of 20,000 gallons.

7.3 The vendor shall include a checklist of the tank specifications with the delivery. The vendor shall list the dimensions, tolerances, etc. of the delivered tank next to the appropriate specification. These dimensions, tolerances, etc. must meet the design requirements listed in this contract. If any requirement does not meet the specification of the contract, the vendor may be responsible for replacement, at no additional cost to the Department.

Section 8: Pricing

Vendors must complete the provided Excel Pricing sheet that indicates tank capacity, shape, dimensions, part numbers and prices.

For the pricing of the tanks, it will be divided into two parts. The first includes the polyethylene tank with the outlet and accessories listed in section 7.1 installed. The second includes the fiberglass tank with the outlets and accessories listed in section 7.2 installed.

Section 9: Descriptive Literature

Each bidder should provide a PDF document of descriptive literature that fully describes the storage tanks being offered. The document must not contain any downloadable programs/links.

State of Ohio, Department of Transportation (ODOT)

Office of Contract Sales, Purchasing Services

OhioBuys

Terms and Conditions for Submitting Excel Pricing File in Bid Package

If an Excel File is Present in OhioBuys

1. SUBMISSION OF EXCEL PRICING FILE: Bidders should submit the pricing page in the original excel format.

2. UNAPPROVED ALTERATIONS TO EXCEL PRICING FILE: Bidders who materially alter the original content of the Excel pricing file (e.g. specifications, formulas, etc.) issued by the Department may be found non-responsive and ineligible for award of this procurement.

3. CHANGES TO EXCEL PRICING FILE: The Department will only make modifications to the Excel pricing file by written addendum only. Where changes are necessary to the Excel pricing page, the Department will issue a new Excel pricing page indicating the revisions made and a revision date for the changes.

It is the sole responsibility of the bidder to check for issued addenda prior to submitting a bid package to ensure the most updated Excel pricing file is being utilized.

4. DESCRIPTIVE LITERATURE: Bidders may electronically provide any descriptive literature (e.g. brochures, spec/cut sheets, drawings, MSDS, etc.) regarding the products and/or services offered by the bidder. As this literature may be publicly posted for viewing by purchasers, bidders must not submit any literature electronically in which they consider to be a trade secret, proprietary, or confidential in any way.

(the remainder of this page has been left intentionally blank)

INSTRUCTIONS, TERMS AND CONDITIONS FOR BIDDING

(Last revised 11/2/2023)

1. BIDDER REGISTRATION: The Department requires awarded bidder(s) to successfully register as a State of Ohio Supplier with the Department of Ohio Shared Services and successfully obtain an OAKS vendor identification number (OAKS ID) within fourteen (14) calendar days from the date of contract award and execution. The Department cannot utilize awarded Contracts to purchase from a bidder who cannot obtain an OAKS ID from Ohio Shared Services. In the event an awarded bidder is unable to obtain an OAKS ID, the Department shall reserve the right to revoke its award to the bidder and immediately cancel any resulting Contract.

a. A Supplier Information Form and W-9 must be completed and sent back directly to Ohio Shared Services in order to register and apply for an OAKS ID. The following website can be accessed by bidders to obtain both the forms and specific instructions for obtaining an OAKS ID:

b. http://ohiosharedservices.ohio.gov/SupplierOperations/Forms.aspx

c. It is strongly recommended that all interested bidders not already registered with Ohio Shared

Services submit the above paperwork prior to the bid submission deadline.

2. HOW BIDS MUST BE SUBMITTED: Vendors must submit their Bid Responses electronically in OhioBuys before the published deadline date & time, Columbus, Ohio local time on the Proposal due date. Vendors will not be able to submit Bid Responses, or unsolicited Proposal amendments after the deadline.

Vendors must allow adequate time for uploading a Bid Response prior to the due date and time. ODOT recommends that vendors submit Bid Responses as early as possible. If a second round is issued for any reason, vendors must resubmit their bid if they had already submitted in a previous round, as the previously submitted Bid Responses do NOT carry over to the new round.

3. PREBID QUESTIONS, DISCREPANCIES, AND CLARIFICATIONS: Any discrepancies, omissions, ambiguities, or conflicts in or among the bidding documents or doubts as to the meaning shall be brought to the Department’s attention by the bidder no less than three (3) business days prior to the bid submission deadline. All questions, discrepancies, clarifications, etc. must be submitted electronically in OhioBuys.

During the competitive bidding process, bidders (and their agents) are prohibited from contacting any ODOT office, including District offices, other than the Office of Contract Sales, Purchasing Services section to obtain responses to any questions. The Department may find a bidder non-responsive for failing to adhere to any of the above requirements.

4. MODIFICATIONS TO THE BIDDING DOCUMENTS: When it is deemed necessary to modify these bidding documents, the Department will only do so by written addendum. The issuance of an addendum is dependent upon the information received and the impact on the competitive bid process. All issued addenda will be posted to the OhioBuys website.

5. PRE-BID CONFERENCES: The Department reserves the right to hold mandatory or optional pre-bid conferences at its discretion. Conferences may be held either in-person or via webinar/phone conference formats. Bidders will be required to sign-in at all pre-bid conferences. The sign-in sheet for all pre-bid conferences is considered a public record, will be kept in the bid file, and will be shared with any requesting party. Additionally, any business cards collected during any pre-bid conference shall be considered public records and may be distributed out to all conference attendees. Any changes to the requirements or specifications of a procurement, as a result of the pre-bid conference content, will be made by written addendum and publicly posted.

a. For mandatory pre-bid conferences, the Department requires that those companies intending on submitting a bid be in attendance for the entire duration of the pre-bid conference. Mandatory pre-bid conferences will officially begin five (5) minutes after the scheduled date and start time at the location specified in the Special Terms and Conditions. Those bidders not in attendance at that time http://ohiosharedservices.ohio.gov/SupplierOperations/Forms.aspx will be considered ineligible to submit a bid. The conference will be considered adjourned and complete when a representative of the Office of Contract Sales, Purchasing Services section indicates so. To be considered in attendance and eligible to bid, a bidder must have at least one representative of the company in attendance. A single representative cannot be present on behalf of two or more companies (bidders). Each company (bidder) must send its own representative on behalf of their organization. It is the sole responsibility of the bidder to ensure that the representative follows the sign-in procedures to properly document the bidder’s attendance. The Department shall not be held responsible for a bidder’s failure to arrive at the meeting on time, properly sign-in, or failure to stay for the entire duration of the meeting.

6. LATE BIDS: A bid received after 1:00 p.m. eastern time, on the bid submission deadline. The system will not allow a bid after the closing date and time.

7. BIDS FIRM: Once opened, all bids are firm and cannot be altered by the bidder. Once a Contract is awarded and executed, the Vendor shall deliver all products and/or services at the bid prices and terms contained in the Contract. All submitted bids shall remain valid for a period of sixty (60) calendar days after the date of the public bid opening. Beyond sixty (60) calendar days, bidders will have the option to either honor their submitted bid or make a written request to withdraw their bid from consideration. The Ohio Department of Transportation shall receive the benefit of any decrease in price during the sixty (60) day period.

8. WITHDRAWAL OF BIDS: A bidder may withdraw their bid in OhioBuys prior to opening. If after opening a vendor wishes to withdraw their bid, they may do so in writing to the Ohio Department of Transportation.

9. MODIFICATION OF SUBMITTED BIDS PRIOR TO BID OPENING: A bidder may modify their bid response prior to the scheduled date and time set for the public bid opening in OhioBuys.

10. UNIT BID PRICES: The unit bid price(s) submitted shall govern the award of this procurement unless otherwise specified in the bid evaluation criteria. The unit bid price should be entered for each required bid item on the Department’s pricing page. Use of ditto marks, arrows, or other markings in lieu of the actual unit price may result in a non-responsive bid determination. Lot or group prices listed in the unit bid price area shall be considered as the unit price unless clearly identified as the lot price. Unless specifically allowed in the contract’s terms and conditions, requests to change or alter unit bid prices after the public bid opening are prohibited.

a. The following requirements also apply to unit bid prices:

11. DECIMAL POINT: Bidders should not insert a unit cost of more than two (2) digits to the right of the decimal point. Digit(s) beyond two (2) will be dropped and not recognized by the Department for the purposes of bid evaluation or contract award.

12. CREDIT CARD FEES: Bidders must incorporate into their unit bid price(s) submitted all costs and fees associated with the State’s use of a payment (credit) card.

13. DISCOUNTS: While bidders may offer to the Department discounts for prompt payment and other similar incentives, discounts and incentives these will not be used to alter the submitted unit bid price(s) for purposes of bid evaluation and contract award. This section only applies to bids awarded to the lowest responsive and responsible bidder either by individual bid item or group of bid items and does not include bids which are awarded to all responsive and responsible bidders (i.e. Multiple Award Contracts).

14. MULTIPLE AWARD CONTRACTS: Pursuant to Ohio Revised Code 5513.02, the Department may award

Contracts to all responsive and responsible bidders for articles (i.e. bid items) meeting the general specifications provided. These are referenced by the Department as ‘Multiple Award Contracts’. Unit bid prices submitted for Multiple Award Contracts shall be considered by the Department as an amount-not-to-exceed unit bid price for the entire duration of the Contract. These awarded, amount-not-to-exceed bid prices often do not reflect potential quantity discounts, freight discounts, nor other similar discounts/incentives offered periodically by a distributor, manufacturer, or supplier. Where like or similar bid items are being offered by two or more awarded Vendors (bidders) on the awarded Contract, the Department reserves the right to obtain quotes from all awarded bidders on the Contract in order to achieve the best and most up-to-date pricing available to the Department at the time of ordering.

15. UNBALANCED BIDS: The Department will not accept unit bid prices that are deemed to be either materially or mathematically unbalanced. The final determination of an unbalanced unit bid price shall be at the Department’s sole discretion.

16. TIE BID PROCESS: If two or more responsive bids offer the same unit bid price, ODOT may break the tie as follows: during the bid evaluation process, the bidders that submitted tie bids will be contacted and given up to three (3) business days to submit a written revised unit price for the affected item or items. Bidders are not required to submit a revised unit price. In the event a tie still exists after the above-prescribed deadline has passed, ODOT will schedule a coin flip to be conducted in the presence of both bidders. The winner of the coin flip will be deemed awarded the affected bid item(s).

17. PREFERENCE FOR OHIO/BORDER STATE PRODUCTS: The bid award for this procurement may be subject to the domestic preference provisions of the Buy America Act, 41 U.S.C.A., 10a-10d, as amended, and to the preference for Ohio products under O.R.C. Sections 125.09 and 125.11 and Ohio Administrative Code Rule 123:5-1-06.

18. RESPONSIVE BIDDER: A bidder is responsive if its bid responds to the bid specifications in all material respects and contains no irregularities or deviations from the specifications that would affect the amount of the bid or otherwise give the bidder an unfair competitive advantage.

19. MINOR INFORMALITIES OR IRREGULARITIES IN BIDS: A minor informality or irregularity is one that is merely a matter of form and not of substance. It also pertains to some immaterial defect in a bid or variation of a bid from the exact requirements of the invitation that can be corrected or waived without being prejudicial to other bidders. The defect or variation is immaterial when the effect on price, quantity, quality, or delivery is negligible when contrasted with the total cost or scope of the supplies or services being acquired. The Department either shall give the bidder an opportunity to cure any deficiency resulting from a minor informality or irregularity in a bid or waive the deficiency, whichever is to the advantage of the Department.

20. BIDDER RESPONSIBILITY: The Department will only award this procurement to what it deems to be a responsible bidder. The Department’s determination of a bidder’s responsibility includes, but is not limited to, the following factors:

i. experience of the bidder;

ii. bidder’s financial condition;

iii. bidder’s conduct and performance on previous contracts;

iv. the bidder’s facilities;

v. the bidder’s management skills;

vi. the bidder’s employees;

vii. past experience and/or quality of bidder’s proposed subcontractors;

viii. the bidder’s ability to execute the contract;

ix. review of Federal and Department debarment lists;

x. bidder has history of successful performance on contracts of similar size and scope; and

xi. current or impending legal actions against a bidder.

21. APPARENT CLERICAL MISTAKES: Clerical mistakes apparent on the face of the bid may be corrected, at the Department’s discretion, before contract award. The Department first shall obtain from the bidder a verification of the information intended and will attach written verification of the mistake by the bidder in the contract file and award documents. Example of apparent clerical mistakes are:

1. Obvious misplacement of a decimal point or comma;

2. Obvious incorrect discount factor; or

3. Transcription error in Part Number.

22. ADDITIONAL INFORMATION: The Department reserves the right to request additional information to evaluate a bidder’s responsiveness to the procurement’s requirements and/or to evaluate a bidder’s overall responsibility. These requests may require the bidder’s submission of confidential materials (e.g. financial statements). If a bidder does not provide all of the requested information within the prescribed timeframe, the Department may find the bid non-responsive and ineligible for award.

23. PRODUCT SAMPLES: The Department may require bidders, by procurement or by request during bid evaluation, to provide sample supplies or equipment or examples of work, at the Bidder’s expense. Samples must clearly identify the Bidder, the bid number, and the item the sample represents in the bid. The Department will return samples that are not destroyed by testing, at the Bidder's expense, upon the Bidder’s timely request. The Department may keep the samples of the Bidder awarded the contract until the completion of the contract. Unsolicited samples submitted in response to this procurement will not be evaluated and the Department may dispose of them in any way it chooses.

24. SPECIFICATIONS: The Department is authorized by Sections 5513 and/or 125.02(B) of the Ohio Revised

Code to prepare specifications and establish contracts to obtain the supplies, equipment, and/or services referenced within this procurement. The purpose of the provided specifications is to describe the supplies, equipment, and/or services to be purchased and will serve as a fair and equitable basis for comparison of submitted bids. The Department may use any form of specification it determines to be in the best interest of the Department and that best describes the supplies or services to be purchased. Specifications may be in the form of a design specification or a combination thereof. If the department determines that a design, performance or a combination specification is not in the best interest of the Department, it may use brand name or equal specifications.

a. Unless otherwise specified in this procurement, all products, equipment, supplies, etc. offered by bidders must be in a new condition. A ‘new’ product is one that will be first used by the Department after it has been manufactured or produced. Used, reconditioned, or previously titled products, supplies, or equipment will not be considered for award of this procurement.

b. The Department uses qualified products list (QPL) and/or approved products lists (APL) developed by either itself or other qualified institutions to specify acceptable products and supplies that have been through proper application and testing procedures to verify conformance with technical and/or performance specifications. Where the Department requires products and supplies to be included on a specific QPL/APL listing, the Department will not accept bids for products/supplies that are not included on a specified QPL/APL at the time of public bid opening.

c. A bidder may not be compensated for damages arising from inaccurate or incomplete information in the procurement specifications or from inaccurate assumptions based upon the specifications.

25. USE OF BRAND NAMES: Unless otherwise provided in this solicitation, the name of a certain brand, make, or manufacturer does not restrict bidders to the specific brand, make, or manufacturer named, but conveys the general style, type, character, and quality of the article desired. Any article which the Department, in its sole discretion, determines to be the equivalent of that specified, considering quality, workmanship, economy of operation, or suitability for the purpose intended, may be accepted. The bidder is responsible to clearly and specifically identify the product being offered and to provide sufficient descriptive literature, catalog cuts and technical detail to enable the Department to determine if the product offered meets the requirements of the solicitation. Failure to furnish adequate data for evaluation purposes may result in declaring a bid nonresponsive. Unless the bidder clearly indicates in its bid that the product being offered is an equivalent product, such bid will be considered to offer the exact brand, make, or manufacturer name referenced in the bid solicitation.

26. DEVIATIONS: Statements or modifications made by a bidder in their submitted bid package that deviate from this procurement’s terms, conditions, specifications and requirements may render a bid non-responsive and ineligible for award.

27. ESTIMATED QUANTITIES: Any purchase estimates indicated for bid item(s) are to be considered as estimates only. The Department makes no representation or guarantee as to the actual amount of item(s) to be purchased by the Department or Political Subdivisions.

28. OVERLAPPING CONTRACT ITEMS: The products and/or services included in this solicitation may be available from other State of Ohio contracts and/or other contracts made available for the Department’s use.

The existence of these contracts containing like or similar products and/or services could be either known or unknown to the Department at the time this procurement has been published. Unless otherwise stated in this contract, the Department may acquire these products and/or services from any available source. The Department will make purchases from sources that are deemed to be in the best interest of the Agency.

29. REJECTION/PARTIAL AWARD OF BIDS: The Department reserves the right to reject any or all bid responses, award partial contracts, or choose to rebid when:

1. Product, supplies and/or services are not in compliance with the requirements, specifications, and terms and conditions set forth in this procurement; or

2. Pricing offered is determined to be excessive in comparison with existing market conditions, or exceeds the available funds of the Department; or

3. Only one bid is received, and the Department cannot determine the reasonableness of the bid prices submitted; or

4. It is determined that the award of any or all items would not be in the best interest of the Department; or

5. The Department, in its opinion, did not achieve the desired amount of competition amongst qualified bidders for the products, supplies, and/or services being offered in the bid solicitation; or

6. Inadequate or ambiguous specifications were cited in the bidding documents; or

7. The Department determines that specifications and/or requirements were missing from the bidding documents; or

8. A bidder imposes additional terms and conditions against the Department.

30. NOTICE TO BIDDERS OF REJECTED BIDS: When the Department deems it necessary to reject a bid, the Department will notify each affected bidder and the reasons for such actions.

31. BID PROTESTS: Any apparent low bidder either deemed not responsible or whose bid has been deemed non-responsive shall be notified by the Department of that determination and the reasons for it. The notification will be provided by the Department in writing and sent by U.S. mail and at the email address provided on the front cover of the bidder’s bid. The bidder will have five (5) calendar days after receipt (by mail or email confirmation) of this notification to file a written, valid protest of the Department’s determination.

A valid written protest must contain substantive information and evidence so as to refute the Department’s asserted claims against either the bid’s responsiveness or bidder’s responsibility, whichever apply. The Department will only review and respond to valid written protests containing substantive information and evidence. After review of the valid written protest, the Department will either affirm or reverse its original determination.

a. If a valid written protest is not received by the Department within five (5) calendar days of receipt, the Director of ODOT will move forward awarding the Contract and the affected bidder will have effectively waived its right to protest the Department’s decision. For the purposes of this paragraph, “receipt” shall be defined as verification (via either certified mail return receipt or electronic read or delivery receipt) that the apparent low bidder has received the Department’s written determination against the affected bidder. Upon the bidder’s receipt, the five (5) calendar day response deadline shall commence.

32. DELAYS IN CONTRACT AWARD: Delays in the award of this procurement beyond the anticipated Contract start date may result in a change in the contract period as indicated in the Special terms and conditions of this bid solicitation. In these instances, ODOT shall reserve the right to award a contract covering a period equal to or less than the initial contract term than originally specified in this bid solicitation.

33. CONTRACT AWARD AND FORMATION: Successful bidder(s) will receive via U.S. regular mail and/or email a Notice of Contract Award letter as well as a photocopy version of the Signature Page executed by both Parties. These documents shall serve to form the Contract between the Parties. The Signature Page must be executed by both the bidder and the Director of ODOT for the Contract to be deemed valid and enforceable. The Department will maintain in the Contract file the Signature Page document containing each parties’ original signature(s).

a. Upon award of a procurement, the bid invitation number (e.g. Invitation No. 999-16) will subsequently become the number assigned to the resulting Contract (e.g. ODOT Contract number 999-16) and will be referenced by the Department in all matters and documents related to said Contract.

b. Upon award of a procurement, successful bidders will thereafter be referenced as “Vendor” or

“Contractor” by the Department in all matters and documents related to the resulting Contract.

34. PUBLIC POSTING OF AWARDED CONTRACTS: All Contracts awarded by the Office of Contract Sales, Purchasing Services section are posted to the Ohio Buys website and open for public review. Successful bidders and awarded Contract pricing can be found via the following website:

https://ohiobuys.ohio.gov/page.aspx/en/ctr/contract_browse_public

35. PUBLIC RECORD: All opened bids and their contents are subject to the Public Records Law, Section 149.43 of the Ohio Revised Code. Copies of bid responses must be requested and will be provided within a reasonable period of time and at a fee established by the Director of ODOT. To expedite and properly respond to such public records requests, a written request must be submitted to the Department. To prevent delays in evaluating bids and awarding contracts, such requests for recently opened bids, will be honored after a Contract has been executed.

a. Bidders may request that specific information, such as trade secrets or proprietary data, be designated as confidential and not considered as public record. Material so designated shall accompany the bid and be in a sealed container duly marked, and shall be readily separable from the bid in order to facilitate public inspection of non-confidential portion. Prices, makes, models, catalog numbers of items offered, deliveries and terms of payment cannot be considered as confidential. The decision as to whether or not such trade secrets or proprietary data shall be disclosed at the bid opening rests solely with the Department.

b. Requests to view previously submitted bids must be submitted in writing to either of the following addresses:

Contracts.Purchasing@dot.ohio.gov

Ohio Department of Transportation Office of Contract Sales, Purchasing Services 1980 West Broad St. Mail Stop 4110 Columbus, OH 43223 https://ohiobuys.ohio.gov/page.aspx/en/ctr/contract_browse_public mailto:Contracts.Purchasing@dot.ohio.gov

GENERAL DEFINITIONS

(Last revised 11/30/2020)

When used in this procurement or any ensuing contract, the following definitions shall apply. If a conflict exists between these definitions and any definition listed in the bid specifications, the bid specifications shall prevail.

1. AGENCY: Ohio Department of Transportation.

2. AUTHORIZED DISTRIBUTOR: The bidder/vendor who maintains written legal agreements with manufacturers/producers to act as their agent and provide supplies, materials, equipment or services listed in the bid/contract. The authorized distributor must maintain active and sufficient facilities necessary to perform the awarded contract, own title to the goods inventoried within these facilities and maintain a true stock of these goods on a continuing basis and in sufficient quantity to provide uninterrupted service to ordering agencies.

3. BIDDER: The company and/or authorized representative of the company who has signed and is submitting a bid response and who will be responsible to ensure proper performance of the contract awarded pursuant to the bid. The term bidder, proposer, contractor, or vendor may be used interchangeably in this document.

4. DEPARTMENT: Ohio Department of Transportation

5. EQUIPMENT: Items, implements and machinery with a predetermined and considerable usage life.

6. F.O.B. PLACE OF DESTINATION: meaning the Vendor pays, and includes the cost of such in their bid, and bears the risk for the transportation/delivery of goods delivered to the specified locations provided by the Purchaser.

7. PROCUREMENT/CONTRACT: All documents, whether attached or incorporated by reference, utilized for soliciting bids. Upon completion of the evaluation and award of the bidder's response, the procurement then becomes the contract between ODOT and the successful bidder, both governed by the laws of the State of Ohio.

8. INVOICE: An itemized listing showing delivery of the commodity or performance of the service described in the order, and the date of the purchase or rendering of the service, or an itemization of the things done, material supplied, or labor furnished, and the sum due pursuant to the contract or obligation.

9. LOWEST RESPONSIVE\RESPONSIBLE BIDDER: A bidder who offers the lowest cost for the goods or services listed in the bid; and whose proposal responds to bid specifications in all material respects and contains no irregularities or deviations from the specifications which would affect the amount of the bid or otherwise give him a competitive advantage; and whose experience, financial condition, conduct and performance on previous contracts, facilities, management skills evidences their ability to execute the contract properly.

10. MINORITY BUSINESS ENTERPRISE (MBE): means an individual, partnership, corporation or joint venture of any kind that is owned and controlled by U. S. Citizens and residents of Ohio, who are and have held themselves out as members of the following socially and economically disadvantaged groups. Only businesses certified by the State of Ohio Equal Opportunity Division in accordance with Section 123.151 of the Ohio Revised Code shall be recognized as being MBE certified within the purpose of this invitation.

11. MATERIALS: Items or substance of an expendable or non-expendable nature from which something can be made, improved or repaired.

12. PURCHASE: To buy, purchase, installment purchase, rent, lease, lease purchase or otherwise acquire equipment, materials, supplies or services. "Purchase" also includes all functions that pertain to obtaining of equipment, materials, supplies or services, including description of requirements, selection and solicitation of sources, preparation and award of contracts, and all phases of contract administration.

13. SERVICES: The furnishing of labor, time or effort by a person, not involving the delivery of a specific end product other than a report which, if provided, is merely incidental to the required performance. "Services" does not include services furnished pursuant to employment agreements or collective bargaining agreements.

14. SPECIFICATION: Any description of the physical or functional characteristics or of the nature of supplies, equipment, service, or insurance. It may include a description of any requirements for inspecting, testing, or preparing supplies, equipment, services, or insurance.

15. SUPPLIES: Provisions and items normally considered expendable or consumable.

16. UNBALANCED: Any unit price contained in the bid schedule which is obviously unbalanced either above or below reasonable cost analysis and or unreasonably disproportionate to current market prices as determined by the Director of ODOT, or if such unbalanced prices are contrary to the interest of the department.

17. VENDOR: The bidder who, upon awarding of a contract, then becomes a Vendor who is considered to be a primary source for providing the goods and/or services included in the awarded contract and the party to whom payment will be made upon delivery of the goods and/or completion of the contract.

18. SUBVENDOR/SUBCONTRACTOR: An individual, firm or corporation to whom the Vendor sublets part of the contract to be performed.

STANDARD CONTRACT TERMS AND CONDITIONS

(Last Revised 11/8/23)

1. HEADINGS: The headings used in this Contract are for convenience only and shall not be used to affect the interpretation of any of the Contract terms and conditions.

2. ENTIRE CONTRACT: This Contract consists of the complete procurement, including the Instructions, Terms and Conditions for Bidding, these Standard Contract Terms and Conditions, the Special Contract Terms and Conditions, ODOT Cooperative Purchasing Program Requirements, mutually executed Signature Page, Specifications and Requirements, awarded unit bid pricing, and any written addenda to the procurement; the completed competitive sealed bid, including proper modifications, clarifications and samples; and applicable, valid State of Ohio purchase orders or other ordering documents (“Contract”).

3. APPROPRIATION OF FUNDS. Pursuant to the Constitution of the State of Ohio, Article II Section 22, ODOT’s funds are contingent upon the availability of lawful appropriations by the Ohio General Assembly. If the Ohio General Assembly fails at any time to continue funding for the payments or obligations due hereunder, the Work under this Contract that is affected by the lack of funding will terminate and ODOT will have no further obligation to make any payments and will be released from its obligations on the date funding expires.

The current Ohio General Assembly cannot commit a future Ohio General Assembly to a future expenditure.

If the term of this Contract extends beyond a biennium, the Contract will expire at the end of a current biennium and the State may renew this Contract in the next biennium by issuing written notice to the Vendor no later than July 1 of the new biennium. The operating biennium expires June 30th of each odd-numbered calendar year.

4. OBM CERTIFICATION: None of the rights, duties, or obligations in this Contract will be binding on the

Department, and the Vendor will not begin its performance, until all of the following conditions have been met:

1. All statutory provisions under the O.R.C., including Section 126.07, have been met; and

2. All necessary funds are made available by the Ohio Office of Budget and Management; or

3. If ODOT is relying on Federal or third-party funds for this Contract the ODOT gives the Vendor written notice that such funds have been made available.

5. CONTRACT MODIFICATIONS: Amendments or modifications to this Contract must be executed in writing between the parties and signed by the Director of ODOT. Amendments or modifications to this Contract made between the Vendor and other Department personnel shall be void and unenforceable.

6. CONTRACT CONSTRUCTION: Any general rule of construction to the contrary notwithstanding this Contract shall be liberally construed in favor of the effect the purpose of this Contract and the policy and purposes of the Department. If any provisions in this Contract are found to be ambiguous, an interpretation consistent with the purpose of this Contract that would render the provision valid shall be favored over any interpretation that would render it invalid.

7. GOVERNING LAW / SEVERABILITY: This Contract shall be governed by the laws of the State of Ohio, and the venue for any disputes will be exclusively with the appropriate court in Franklin County, Ohio. If any provision of the Contract or the application of any provision is held by that court to be contrary to law, the remaining provisions of the Contract will remain in full force and effect.

8. ASSIGNMENT / DELEGATION: The Vendor will not assign any of its rights nor delegate any of its duties under this Contract without the written consent of the Director of ODOT. Any assignment or delegation not consented to may be deemed void by the Department.

9. PLACEMENT OF ORDERS/METHODS OF PAYMENT: The Department shall use either State of Ohio

Purchase Order or State of Ohio Payment Card (i.e. credit card) to authorize performance under this Contract and to issue payments for supplies, products, and/or services acquired. Vendors are required to accept both forms of payment. For Department purchases over $2,500.00, an official State of Ohio purchase order must be generated and obtain approvals from the Office of Budget and Management, the Department of Administrative Services, and the Director of Transportation prior to its effectiveness. An approved State of Ohio purchase order will be sent to the Vendor and the Vendor will provide the goods and/or services listed on the ordering documents and in accordance with the Contract’s terms and conditions. Any order placed not using an approved ODOT purchase order or against a State payment card, shall not be considered a valid order and may result in denial of payment and/or return of goods at the Vendor's expense.

10. ACCEPTANCE OF ORDERS: The Vendor must accept orders placed by the Department pursuant to this

Contract up through the last day of the Contract’s effectiveness, inclusive of any contract extensions exercised or agreed-upon between the Parties.

11. BLANKET PURCHASE ORDERS: The Department utilizes blanket purchase orders to pre-authorize funding for use on Contracts containing bid items that, due to the urgent nature of maintaining the Department’s highways and facilities, are critical to the Department executing its mission and objectives. The generation of blanket purchase orders are not used by the Department to place a specific order, rather as a means to make funding more readily available for use when Contract items are needed. The Vendor shall keep all blanket purchase orders on file and make them readily available for use by Department personnel to place orders against. When placing orders against a blanket purchase order, the Department will telephone or email orders referencing the blanket purchase order and its associated ODOT purchase order number. All of the Contract’s terms and conditions shall apply to the Department’s orders referencing a blanket purchase order.

For all blanket purchase orders, quantities and amounts to be purchased from these purchase orders is unknown by the Department and Vendors must not construe these purchase orders as a commitment to purchase a specific amount of goods and/or services. Accordingly, the Department reserves the right to increase or decrease the available funding on these blanket purchase orders at its discretion.

12. DELIVERY INSPECTION AND ACCEPTANCE: Upon pick-up or delivery of any supplies, products, and/or services, ODOT retains the right to inspect the product/service prior to final acceptance and/or payment for the product/service. ODOT shall have sufficient and reasonable time to fully inspect supplies and/or services for compliance. The purpose of the inspection process is to ensure that the product/service is in compliance with the specifications set forth in the awarded contract. In the event that the product/service does not meet the specifications, ODOT shall notify the Vendor for removal/replacement of the product and/or service at the Vendor’s expense. ODOT shall retain all rights and remedies as described herein. Wherein products ordered by ODOT are delivered to a facility, which is not owned by ODOT and where ODOT has contracted with this facility to take delivery of products ordered by ODOT, acceptance will occur when the products have been inspected and accepted by ODOT within a reasonable amount of time after delivery to the facility. ODOT shall not be responsible for any storage costs incurred prior to the inspection and acceptance.

13. RETURN GOODS POLICY: The Department will apply the following Return Goods Policy on all purchases made under the Contract:

(A) Return goods, when due to Vendor debar (i.e. over-shipment, defective merchandise, unapproved substitution, etc.) shall be returned to the Vendor, at the Vendor’s expense. The Vendor shall make arrangements to remove the return goods from the Department’s premises within five (5) calendar days after notification. The Vendor shall not apply any restocking or other charges to the Department. At the option of the Department, replacement items may be accepted and will be shipped within five (5) calendar days of notification.