011_spec__7_.docx

Invitation No. 011-25

ITB 011-25 Automated Flagger Assistance Device (AFAD) 11/7/2024

REQUIREMENTS/SPECIFICATIONS

Section 1: Intent

The purpose of this invitation is to establish term contract pricing for ODOT pre-qualified towable trailer-mounted Red/Yellow Lens Automated Flagger Assistance Devices (AFADs). Units bid through this Invitation to Bid must be complete units and must be new and in unused condition.

Section 2: Award

Award of this invitation will be to the lowest responsive and responsible bidder per item. Therefore, there will be seven (7) separate bid items for award. Each unit price on the pricing page shall reflect one individual towable trailer-mounted Red/Yellow Lens AFAD unit for the respective bid item.

Section 3: Contract Duration

The effective duration of this contract shall be from the Date of Award through November 30, 2026. Unit bid pricing awarded shall be effective throughout the entire duration of the contract.

Section 4: Free on Board (F.O.B.) Destination

Please be advised, the vendor must honor any bid price submitted in this Invitation to Bid for all of ODOT’s twelve (12) Districts, Central Garage and eighty-eight (88) counties in the State of Ohio. The net unit bid price shall include delivery charges F.O.B. to any of ODOT’s twelve (12) Districts, Central Garage and eighty-eight (88) county destination locations in the State of Ohio, as per the enclosed map. Purchase orders, when issued, will detail specific destination points. The Department will not accept any additional charges for these deliveries.

Central Garage (CG) – 1620 West Broad St., Columbus OH 43223

Section 5: Delivery

Delivery shall be made within 90 calendar days after receipt of a State of Ohio purchase order.

5.1: Delivery Hours

All deliveries shall be made between the hours of 8:00 a.m. and 3:30 p.m., Monday through Friday, excluding State holidays, unless special permission is granted by the Department to temporarily waive or adjust this requirement.

5.2: Failure to Deliver

The Department may experience monetary damages due to a Vendor’s failure to deliver within the allowable timeframe (e.g. renting temporary units, cost of transporting units from another district, etc.). The Vendor shall be liable for all damages incurred as a result of its failure to deliver complete units within the ninety (90) calendar days.

Section 6: Construction and Material Specifications (C&MS)

Specifications as shown herein are incorporated into the Invitation to Bid and made part thereof and are found in the latest 2023 Ohio Department of Transportation Construction and Material Specifications (with latest Supplemental Specification 800). To obtain the base 2023 Ohio Department of Transportation Construction and Material Specifications, contact:

The cost is $8.25, plus shipping and tax.

The 2023 C&MS with latest SS800 incorporated can also be found online at the following website:

https://www.dot.state.oh.us/Divisions/ConstructionMgt/OnlineDocs/Pages/2023-Online-Spec-Book.aspx

Section 7: Red/Yellow Lens Automated Flagger Assistance Device (AFAD) Specifications

7.1: The unit bid shall be limited to only the ODOT prequalified units that are listed on the ODOT provided pricing page for this contract. Substitutions will not be accepted.

7.2: The unit shall include all standard equipment plus any and all optional equipment that was installed on the unit during the ODOT pre-qualification procedure. (Supplement 1030)

7.3: The unit shall comply with Supplemental Specifications 930, 830 and the Ohio Manual of Uniform Traffic Control Devices with respect to Red/Yellow Lens AFADs.

7.4: One wireless, handheld, remote control that allows a flagger to manually operate the unit shall be provided for each individual unit. The remote control shall be lightweight and weather resistant.

7.5: The unit shall be on a highway legal trailer of sufficient GVWR and capable of being towed at legal highway speeds. Complete highway lighting and reflector package shall comply with FMVSS 108 and State of Ohio regulations. Trailer shall also include safety chains with hooks, four leveling jacks, fenders over the wheels, an adjustable height 3 inch pintle eye ring hitch and a seven pin trailer plug. The trailer plug and other trailer lighting and wiring standards shall be in accordance with Attachment A (Ohio DOT Trailer Lighting & Wiring Standard and Specifications). Trailers with an empty weight of two thousand pounds (2,000 lbs) or more shall include electric brakes equipped with a break away safety switch with battery pack.

7.6: Each unit shall be equipped for individual towing; however, may additionally be equipped for tandem towing (in conformance with Ohio Revised Code 5577.05 Section C(6)).

7.7: Trailer shall be delineated with red and white conspicuity tape in accordance with the current version of the Ohio Department of Transportation Construction and Material Specifications (C&MS) Item 614.03.C.

7.8: Power Supply and Related Items

a) The unit shall be powered using a supply of self-contained batteries capable of providing sufficient electrical power for a minimum 100 hours of use before charging is required. This applies to both cold weather and hot weather.

b) The unit shall be equipped with manufacturer’s recommended number of batteries, providing enough voltage to meet all requirements. A lighted battery condition indicator gauge, to monitor the battery bank voltage or condition shall be provided.

c) Batteries for the unit shall be housed in a lockable enclosure. The design of the enclosure shall allow batteries to be easily removed and replaced.

d) Any solar panel(s) on the unit shall be positioned so that they do not block any part of the unit facing approaching traffic. Solar panel(s) shall be of sufficient size and capability to recharge the power supply to the level necessary to meet all requirements.

e) The unit shall be equipped with a charger to recharge the batteries from a standard 120-volt AC source.

7.9: The awarded vendor shall provide one (1) of each of the following: operation, service and parts manual with each unit.

NOTE: Parts will be purchased outside of this contract, when needed.

7.10: The awarded vendor shall provide a minimum twelve (12) month parts and labor warranty from the date of delivery of each unit. ODOT shall be able to take advantage of, at no additional cost, where standard manufacturer warranties are greater than the minimum twelve (12) month period.

ATTACHMENT A – Ohio DOT Trailer Lighting & Wiring Standard and Specifications

ODOT will only purchase trailers that meet the following lighting and wiring specifications (Reference Drawing):

· Trailer shall meet or exceed all current Federal Motor Carrier Safety Regulations 393.9 thru 393.33.

· Trailer cord plug shall meet SAE spec. J560 and be wired directly to trailer cord with no adaptors.

· Plug to be wired as follows (no other plug wiring will be accepted):

· White – Ground return to towing vehicle

· Black – Electric break controller – or not utilized if trailer has air, hydraulic or no brakes

· Yellow – Left turn signal and on some light duty tow vehicles, stop/hazard lamps

· Red – Stop lamps and antilock device

· Green – Right turn signal and on some light duty tow vehicles, stop/hazard lamps

· Brown – Clearance, marker, license plate and tail lights

· Blue – If air Brake – Continuous ABS power – If electric Brake – Ing. Controlled B+ for break-away battery charge maintenance circuit

· No adapters will be accepted.

· Trailer cord to be wired to a weatherproof, 7-terminal junction block (Waytek part #47290 or approved equal).

· All trailer light wiring (including ground wiring) must be routed to junction block.

· Wire splices will be done with heat shrink butt connectors or soldered with heat-shrink.

· No wire nuts, closed end connectors or self-stripping displacement connectors (i.e. Scotch Loks).

· All lights to be LED. There shall be individual brake (2 ea.) and turn signal lights (2 ea.) for a total of 4 lights. These lights shall be 4” Round lights in rubber grommets or 3”x7” oval lights in rubber grommets. Clearance and Marker lights shall be 2” round lights in rubber grommets or ODOT approved equal.

image1.png