01. ATTCH 1_Color Plotter Printer Purchase Description.pdf

Attachment 1 – Purchase Description W912LP-22-Q-2019

Iowa Army National Guard Color Plotter Printer Purchase Description

Color Plotter Printer:

Printing Modes Gloss:

• Banner/Max speed mode:1, 195 ft. 2/hr

• Banner production high speed mode: 840 ft. 2/hr

• Speed mode: 603 ft 2/hr

• Productions mode: 420 ft. 2/hr

• High Quality: 312 ft.2/hr.

• Specialty mode: 215 ft.2/hr.

• High Speed - 388 ft.2/hr.

• Speed - 291 ft.2/hr.

Printing Modes Matte:

• Production 237 ft.2/hr.

• Quality - 194 ft.2/hr.Speed mode: 603 ft 2/hr

• Specialty - 140 ft.2/hr.

• Backlit - 194 ft.2/hr.

• Backlit Density - 107 ft.2/hr.

Print Resolution:

• Up to 1,800 dpi

Ink Color:

• CMYK – UVgel 460 ink

Ink Packaging:

• .70-liter ink bottle

• Ink reservoir can accommodate up to 2.5 liters per ink color

Automictic Maintenance:

• PAINT constantly monitors and compensates for nozzle failures that can occur during printing

• Automatic maintenance performed in seconds, daily

• Refill ink while printing

Curing:

• UV LED with FLXfinish, instant dry, low temperature

Media:

• Roll width up to 64” (1,625mm)

• Print margin 0.21” (5.3mm) o Margin 0.43" when yellow markers are used (recommended for print modes up to 420 ft./hr. for optimized output quality)

• Roll weight up to 110 lb. (50kg)

• Roll diameter up to 8.7” (220 mm)

• Media thickness up to 0.03” (0.8 mm)

• Number of input rolls standard with one roll o Option for second roll, PSO Double-sided printing and Automatic roll-feeding and switching

Attachment 1 – Purchase Description W912LP-22-Q-2019

Technologies:

• UVgel technology o Instant pinning and dot gain control o Low-temperature curing, suitable for thin and heat-sensitive media o High-precision color matching and consistency o Instantly dry

• Optional FLX finish o Gives you the choice between gloss or matte output on both smooth and structured media o Enables you to print on porous and uncoated materials

Printer size and weight:

• Printer dimensions 119” W x 43” D x 52” H (3,022 W x 1,093 D x 1,300 H mm)

• Printer weight 1,631 (740 kg)

Software:

• Supported RIPS- ONYX® Thrive™, Caldera, and API for third-party RIP vendors

Delivery and Installation:

Prior to delivery of printer, contractor shall notify the Government’s POC of power and outlet requirements with sufficient time for electrician the review/install as needed.

After delivery of printer, contractor shall perform the following:

• Perform all required assembly of printer components

• Perform all software installation

• Perform all software updates (if applicable)

• Perform function check to ensure printer is operating correctly after initial installation