01_Description of Requirements_MPU5.pdf

Description of Requirement Wireless Radio System and Accessory Kit

Scope: The Geotechnical and Structures Lab (GSL) of the Engineer Research and Development Center has a requirement for the following:

Table 1: Wireless radio system and accessories required by the ERDC

Component Information/Specifications Mfg Part # Contractor Part # Manufacturer QTY

MPU5 Wave Relay Tactical Radio (MPU5 Chassis with twist locking battery)

WR-5100 WR-5100 Persistent Systems, LLC 7

Blue Sky Mast Mounting System

BSK-RAM-MOUNT-

SYSTEM 7

MPU5 High Power S-Band RF Module (2.5-2.5GHz - 3x3

MIMO)

RF-2150 RF-2150 Persistent Systems, LLC 7

S-Band Omni Spring Base Antenna (omno, 2.1-2.5GHz S- Band sleeve dipole spring base antenna rev 1)

ANT-2003 ANT-2003 Southwest Antennas 7

2.2-2.5GHz 2 dBI Horizontal Polarized Omnidirectional Antenna

ANT-2037 7

MPU5 Battery (lithium-ion twist-lock battery back for the

MPU5)

BT-70716 BAT-06 Bren-Tronics 7

MPU5 battery eliminator plug (MPU 5 Battery Eliminator to BB Battery Plug)

CBL-PWR-0002 CBL-PWR-0002 SupplyNet 7

MPU5 90 watt battery eliminator AC outlet (AC adaptor)

CBL-PWR-0001 CBL-PWR-0001 SupplyNet 7

MPU5 22-pin cap (all ports) ACC-MPU5-CAP01 7

GPS antenna SMA-male stub antenna (3.3V active)

ANT-4001 ANT-4001 Radiall, Inc. 7

MPU5 22pin to IP67 rated Ethernet jack (mates with standard outdoor rated Ethernet cables)

CBL-DATA-2013 CBL-DATA-2013 Persistent Systems, LLC 7

2.22 - 2.50 Ghz, 120° Integrated Sector Antenna System

WR-INT-ANT-SYS-

WR-INT-ANT-SYS-

Persistent Systems, LLC 4

Specifications for the system for purchase are included in Table 2 below. These specifications are met by the items listed in Table 1.

Table 2: Specifications of needed wireless radio system and accessories

Operating Frequency Range(s) Swappable Frequency modules:

High Power S-Band Freq. Range: 2200 – 2507 MHz;

S 2.1-2.5 GHz 15 dBi RP-M Sprg Antenna with base;

S 2.2 – 2.5 2 dBi 10W Hpole Omni Mount

Radio Connection Protocol(s) Integrated Wave Relay MANET:

Self forming/Self healing capabilities; Peer-to-Peer

Transmit Power 6W- 10W Input Power DC PWR 8 – 28 VDC; Battery Cable; A/C Adapter; 22-

Pin Cap (All Ports) GPS GPS for auto location; 1 pulse per second update; Cursor-on-Target Compliant Data Throughput 100+ Mbps

TX/RX Operating Modes Operating modes including but not limited to:

SISO and 3x3MIMO

Network Requirements IPv4 and IPv6 compatible Integrated DHCP Server Integrated Serial-to-Ethernet capability

Security CTR-AES-256 Encryption HMAC-SHA-256 Authentication and Integrity

Intelligent RoIP Smart/Auto Radio Detection and Tethering capability Environmental IP68 Rated

MIL-STD Certified -40⁰C to 85⁰C Lightning/Surge Suppression

Weight (Chassis Only) 1lb or less Antennae Connection Protocol(s) Integrated Wave Relay MANET; Self forming/Self-healing capabilities; Peer-to-Peer Operating Frequency Ranges S-Band Freq. Range: 2200 – 2507 MHz

Gain 12 dBi Transmit Power 10W

Power input 100 – 240 VAC 50/60Hz

24 – 48 VDC

Peak Power 45W Horizontal Beam Width 120⁰

I/O Interface(s) Power + Ethernet (RJ45) Network Requirements IPv4 and IPv6 compatible

Integrated DHCP Server 10/100 Mbps Ethernet

Environmental IP66 Rated MIL-STD Certified -40⁰C to 85⁰C Lightning/Surge Suppression

Weight (Antennae Only) 10lbs or less

Delivery Date: All items should be delivered no later than 90 days after contract award.

Delivery Location: Engineer Research and Development Center 3909 Halls Ferry Rd.

Geotechnical and Structures Laboratory

Structural Engineering Branch (Bldg. 5014) Vicksburg, MS 39180