LABOR- Removed belt from motor. Removed second ac compressor. discarged ac system. removed EGR tube and installed factory EGR tube.
NON-IT Services California Awarded
- Contract number
- 0000902050
- Awardee
- DC CUSTOMS INC
- Contracting organization
- CAL Fire
- Contract amount
- $9,700
Award facts
- UNSPSC code
Updated .
About this award
On January 20, 2026, the California Department of Forestry and Fire Protection (CAL FIRE) awarded a Non-Information Technology Services contract valued at $9,699.60 to DC Customs Inc. for specialized automotive engineering and fabrication services. The contract encompasses the design, engineering, and installation of a dual accessory drive system and secondary air conditioning compressor assembly for a motor unit. Services include detailed labor tasks such as three-dimensional scanning of the motor accessory drive system, computer-aided design and analysis using Solidworks software, three-dimensional printing of prototype components, and precision machining and fabrication of custom parts including pulleys, brackets, and mounting systems.
The scope of work involves comprehensive labor hours billed at rates between $140 and $250 per hour, along with materials and components including steel rods, fasteners, timing belts, pulleys, tensioners, and three-dimensional printing filament. Work activities encompass assembly, testing, and validation procedures, including belt fitment testing, engine testing for alignment verification, and final system pressurization and operational testing. The contract represents a fixed-price award for non-routine specialized services specifically exempt by California statute, with performance anticipated to be completed by the award organization CAL FIRE.
Line items
| Item | Total |
|---|---|
| LABOR- Removed belt from motor. Removed second ac compressor. discarged ac system. removed EGR tube and installed factory EGR tube. | $910.00 |
| LABOR- Measured how much thread was left on alternator pulley to add second pulley to alternator. Removed alternator pulley | $140.00 |
| LABOR- 3D Scan front of motor accessory drive system | $250.00 |
| LABOR- Took measurents of alternator pulley. Designed secondary pulley off measurements on Solidworks. 3D printed model of new pulley to test. Made modifications to CAD design and reprinted. Reinstalled pulley and belt to check fitment. | $1,050.00 |
| Filaments for 3D printing | $50.00 |
| LABOR- Used 3D scan of motor and ac compressor to design a new mounting system for the second ac compressor and accessory drive system. Took extra measurements off motor to account for adding factory EGR | $700.00 |
| LABOR- Machined Steel ¿¿ey stock to length for AC compressor spacing. Marked out holes for drilling and tapping. Drilled holes in key stock and tapped. | $875.00 |
| LABOR- Mocked up tensioner to plate on front of motor for placement. marked holes. removed plate and punched holes in plate for mounting. r | $262.50 |
| LABOR- Took measurements from air cleaner mounting surface to new accessory plate to design mounting bracket. Designed new air cleaner monting plate. cut out, cleaned up and formed on press brake. | $1,050.00 |
| LABOR- Designed and Fabricated custom socket to install and tor¿¿ue secondary alternator pulley | $350.00 |
| LABOR- Installed machined key stock on ac compressor. set onto new mounts to check for clearance. marked position. removed brackets and tacked ac spacers to brackets | $437.50 |
| LABOR- Installed new pulley on to alternator. installed factory belt on to motor. measured for second accessory drive belt | $140.00 |
| LABOR- tested multiple belts for better fitment on second accessory drive. fired engine to test alignment of accessory drive | $420.00 |
| LABOR- Removed ac compressor and mounting plates. removed tensioner plate. drilled holes in tensioner plate for air box mount. cleaned and prepped for paint. Painted. | $612.50 |
| LABOR- torqued all nuts and bolts. Reinstalled both accessory drive belts. Recharge AC system. Run motor for testing. | $420.00 |
| Belt Tensner | $128.81 |
| 1144 Carbon Steel Rod - 1ft | $107.93 |
| Idler Pulley | $50.21 |
| LABOR- Took design, pulley and carbon rod to machine shop. Went over design and specs with machinist | $140.00 |
| LABOR- Measured front of motor where ac brackets used to be to design new mount for accessory drive parts. Designed plate to mount to front of motor. cut out | $350.00 |
| Micro belt 65 27/32 | $32.45 |
| M10-1.5x70mm | $3.88 |
| LABOR- Removed factory idler pulley. measured factory spacers and sleeves to machine new parts for adding second idler pulley. Machined new spacer sleeve | $612.50 |
| M10-1.5x40mm | $8.04 |
| M10-1.5x100mm | $11.28 |
| 375 Mild Steel | $94.50 |
| M10-1.5x115mm | $2.99 |
| 1" Steel Key Stock | $9.65 |
| 1.25" Solid Steel Rod | $8.35 |
| AC pulley adaptor to CNC machine custom aclt pully to spec | $400.00 |
Show all 30
Quick answers
Who was awarded contract 0000902050?
Contract 0000902050 was awarded to DC CUSTOMS INC by CAL Fire in California on January 20, 2026.
How much is contract 0000902050 worth?
Its contract amount is $9,700.
On GovTribe
See this award's full record
- Every line item and file
- The contract it was ordered under and its other orders
- Similar state and local awards and opportunities
- Ask GovTribe AI about this award