Jobber Length Drill Bit Drill Bit Size 3/32 in Drill Bit Point Angle 118 Degrees High Speed Steel… and 34 more items

Ended State & local contract award Florida Awarded

Contract number
C716A4
Awardee
Not on record
Contracting organization
Department of Environmental Protection
Contract amount
$1,279

Award facts

Completion date

Award details come from facts.fldfs.com. Updated .

About this award

Written by GovTribe AI ·

The Florida Department of Environmental Protection issued contract C716A4 on April 14, 2026, with a completion date of June 30, 2026. The contract, valued at $1,279.15, procures a diverse range of industrial and maintenance supplies. The primary commodity categories include high-speed steel drill bits in various sizes ranging from 3/32 inch to 1/2 inch diameter, stainless steel fasteners including hex head cap screws and sheet metal screws, washers, lock nuts, and miscellaneous hardware components. The contract was awarded through the National Association of State Procurement Officials Cooperative (NASPO-ACS) purchasing agreement.

Additional line items under the contract include specialized tools and equipment such as manual and cordless staple guns, a 20-foot aluminum extension ladder with a 250-pound load capacity, wire strippers, hex key sets, and twist-on wire connectors. These supplies and tools represent typical consumables and equipment required for maintenance, repair, and construction operations. The contract period spans approximately 2.5 months, suggesting this procurement fulfills specific operational requirements of the Department of Environmental Protection during this timeframe. The prime contractor information is not specified in the available contract documentation.

Line items

Item Total
TK141460171T Jobber Length Drill Bit Drill Bit Size 3/32 in Drill Bit Point Angle 118 Degrees High Speed Steel Black Oxide Decimal Equivalent 0.0938 Fractional Inch Drill Bit Point Type Conventional Point Non-Coolant Through Number of Coolant Holes 0 6 Each × $2.62 $15.72
TK141460172T Jobber Length Drill Bit Drill Bit Size 1/8 in Drill Bit Point Angle 118 Degrees High Speed Steel Black Oxide Decimal Equivalent 0.1250 Fractional Inch Drill Bit Point Type Conventional Point Non-Coolant Through Number of Coolant Holes 0 6 Each × $2.65 $15.90
TK141460173T Jobber Length Drill Bit Drill Bit Size 3/16 in Drill Bit Point Angle 118 Degrees High Speed Steel Black Oxide Decimal Equivalent 0.1875 Fractional Inch Drill Bit Point Type Conventional Point Non-Coolant Through Number of Coolant Holes 0 6 Each × $3.88 $23.28
TK141460216T Jobber Length Drill Bit Drill Bit Size 3/8 in Drill Bit Point Angle 118 Degrees High Speed Steel Black Oxide Decimal Equivalent 0.3750 Fractional Inch Drill Bit Point Type Conventional Point Non-Coolant Through Number of Coolant Holes 0 6 Each × $11.51 $69.06
TK141460175T Jobber Length Drill Bit Drill Bit Size 5/16 in Drill Bit Point Angle 118 Degrees High Speed Steel Black Oxide Decimal Equivalent 0.3125 Fractional Inch Drill Bit Point Type Conventional Point Non-Coolant Through Number of Coolant Holes 0 6 Each × $7.32 $43.92
TK141460218T Hex Head Cap Screw System of Measurement Inch Basic Material Stainless Steel Material Grade 316 Fastener Finish Plain Dia./Thread Size 1/4 In.-20 Fastener Length 3/4 in Fastener Thread Direction Right Hand Fastener Thread Type UNC Coarse Fast 1 Each × $20.04 $20.04
TK141460220T Hex Head Cap Screw System of Measurement Inch Basic Material Stainless Steel Material Grade 316 Fastener Finish Plain Dia./Thread Size 5/16 In.-18 Fastener Length 3 1/2 in Fastener Thread Direction Right Hand Fastener Thread Type UNC Coarse F 1 Each × $21.46 $21.46
TK141460221T Hex Head Cap Screw System of Measurement Inch Basic Material Stainless Steel Material Grade 316 Fastener Finish Plain Dia./Thread Size 5/16 In.-18 Fastener Length 3 in Fastener Thread Direction Right Hand Fastener Thread Type UNC Coarse Faste 1 Each × $25.03 $25.03
TK141460224T Hex Head Cap Screw System of Measurement Inch Basic Material Stainless Steel Material Grade 316 Fastener Finish Plain Dia./Thread Size 1/2 In.-13 Fastener Length 3 in Fastener Thread Direction Right Hand Fastener Thread Type UNC Coarse Fasten 1 Each × $12.73 $12.73
TK141460225T Hex Head Cap Screw System of Measurement Inch Basic Material Stainless Steel Material Grade 316 Fastener Finish Plain Dia./Thread Size 1/2 In.-13 Fastener Length 3 1/2 in Fastener Thread Direction Right Hand Fastener Thread Type UNC Coarse Fa 1 Each × $13.89 $13.89
TK141460227T Large O.D. Oversized Washer Flat Washer Type Oversized Dimensional Standards AMPG 2001 FL.01 Material Stainless Steel Material Grade/Class 18-8 Finish Plain For Screw Size 1/4 in Inside Diameter 0.281 in Outside Diameter 1 1/2 in Maximum Thic 1 Each × $18.78 $18.78
TK141460223T Hex Head Cap Screw System of Measurement Inch Basic Material Stainless Steel Material Grade 316 Fastener Finish Plain Dia./Thread Size 1/2 In.-13 Fastener Length 2 in Fastener Thread Direction Right Hand Fastener Thread Type UNC Coarse Fasten 1 Each × $19.38 $19.38
TK141460229T Sheet Metal Screw Head Type Pan Finish Plain Material Stainless Steel Screw Size 14 Fastener Length 1 1/2 in Head Width 0.492 in Head Height 0.172 in Drive Size 3 Dimensional Standards ASME B18.6.4 SAE J933 For Maximum Material Thickness 1/4 1 Each × $34.73 $34.73
TK141460233T Flat Washer Flat Washer Type Standard Dimensional Standards AMPG 2001 FL.01 Material Stainless Steel Material Grade/Class 18-8 Finish Plain For Screw Size 1/4 in Inside Diameter 0.281 in Outside Diameter 1/2 in Maximum Thickness 0.078 in Syst 1 Each × $6.94 $6.94
TK141460234T Lock Nut Finish Plain Material Stainless Steel Material Grade/Class 18-8 Thread Size 1/4 In.-20 Hex Width 7/16 in Hex Height 1/4 in Lock Type Nylon Insert Dimensional Standards ASME 18.2.1 ASME B18.16.6 Material Quality Standards Not Applicab 1 Each × $3.90 $3.90
TK141460235T Flat Washer Flat Washer Type Oversized Dimensional Standards ASME B18.21.1 Material Stainless Steel Material Grade/Class 18-8 Finish Plain For Screw Size 5/16 in Inside Diameter 0.344 in Outside Diameter 5/8 in Maximum Thickness 0.113 in Syst 1 Each × $3.97 $3.97
TK141460239T Staple Gun For Fastener Style Flat Crown Staples Stapler Type Wire Cable Stapler For Staple Leg Length 1/4 in 5/16 in 3/8 in 1/2 in Body Material Aluminum For Staple Width 7/16 in Staple Capacity 84 Drive Style Straight Forward Action Stapli 1 Each × $39.73 $39.73
TK141460237T Flat Washer Flat Washer Type Oversized Dimensional Standards ASME B18.22.1 Material Stainless Steel Material Grade/Class 18-8 Finish Plain For Screw Size 3/8 in Inside Diameter 0.406 in Outside Diameter 3/4 in Maximum Thickness 0.109 in Syste 1 Each × $3.75 $3.75
TK141460240T Staple Gun Cordless Tool Kit Contents 1 Bare Tool Cordless Brushless Motor No Voltage 12 V DC Firing Mode Combination Depth Control Yes For Staple Gauge 18 ga For Staple Leg Length 1/4 in to 9/16 in For Staple Type Crowned For Staple Width 3/ 1 Each × $154.49 $154.49
TK141460242T Hex Key Set Tip Size 1.5 mm 1/4 in 1/8 in 2 mm 2.5 mm 3 mm 3/16 in 3/32 in 4 mm 5 mm 5/32 in 5/64 in 6 mm 7/32 in 7/64 in 8 mm 9/64 in Black Oxide 2 Folding Holder Hex 17 No 1 Each × $46.68 $46.68
TK141460243T Wire Stripper Stripping Capacity - Solid Wire 10 AWG 12 AWG 14 AWG 16 AWG 18 AWG Stripping Capacity- Stranded Wire 12 AWG 14 AWG 16 AWG 18 AWG 20 AWG Type Electrical Wire Strippers For Wire/Cable Type Solid Wire Stranded Wire Cutting Capaciti 1 Each × $23.90 $23.90
TK141460245T Twist-On Wire Connectors Color Red For Conductor Material Copper Maximum Operating Temperature 221 Degrees F Maximum Voltage 600 V Minimum Wire Combination 2 14 AWG Maximum Wire Combination 4 12 AWG Contact Finish Zinc Contact Material Steel 1 Each × $24.39 $24.39
TK141460228T Sheet Metal Screw Head Type Pan Finish Plain Material Stainless Steel Screw Size 14 Fastener Length 3 in Head Width 0.492 in Head Height 0.172 in Drive Size 3 Dimensional Standards ASME B18.6.4 SAE J933 For Maximum Material Thickness 1/4 in P 1 Each × $34.73 $34.73
TK141460174T Jobber Length Drill Bit Drill Bit Size 1/4 in Drill Bit Point Angle 118 Degrees High Speed Steel Black Oxide Decimal Equivalent 0.2500 Fractional Inch Drill Bit Point Type Conventional Point Non-Coolant Through Number of Coolant Holes 0 6 Each × $5.11 $30.66
TK141460217T Jobber Length Drill Bit Drill Bit Size 1/2 in Drill Bit Point Angle 118 Degrees High Speed Steel Black Oxide Decimal Equivalent 0.5000 Fractional Inch Drill Bit Point Type Conventional Point Non-Coolant Through Number of Coolant Holes 0 4 Each × $19.99 $79.96
TK141460222T Hex Head Cap Screw System of Measurement Inch Basic Material Stainless Steel Material Grade 316 Fastener Finish Plain Dia./Thread Size 5/16 In.-18 Fastener Length 2 in Fastener Thread Direction Right Hand Fastener Thread Type UNC Coarse Faste 1 Each × $29.95 $29.95
TK141460226T Large O.D. Oversized Washer Flat Washer Type Oversized Dimensional Standards AMPG 2001 FL.01 Material Stainless Steel Material Grade/Class 18-8 Finish Plain For Screw Size 1/4 in Inside Diameter 0.281 in Outside Diameter 1 in Maximum Thicknes 1 Each × $12.26 $12.26
TK141460230T Sheet Metal Screw Head Type Pan Finish Plain Material Stainless Steel Screw Size 12 Fastener Length 1 in Head Width 0.425 in Head Height 0.156 in Drive Size 3 Dimensional Standards ASME B18.6.4 SAE J933 For Maximum Material Thickness 1/4 in P 1 Each × $19.78 $19.78
TK141460219T Hex Head Cap Screw System of Measurement Inch Basic Material Stainless Steel Material Grade 316 Fastener Finish Plain Dia./Thread Size 1/4 In.-20 Fastener Length 3 1/2 in Fastener Thread Direction Right Hand Fastener Thread Type UNC Coarse Fa 1 Each × $14.18 $14.18
TK141460231T Sheet Metal Screw Head Type Pan Finish Plain Material Stainless Steel Screw Size 8 Fastener Length 3/4 in Head Width 0.312 in Head Height 0.115 in Drive Size 2 Dimensional Standards ASME B18.6.3 For Maximum Material Thickness 3/8 in Pack Size 1 Each × $5.89 $5.89
TK141460232T Sheet Metal Screw Head Type Pan Finish Plain Material Stainless Steel Screw Size 8 Fastener Length 1/2 in Head Width 0.312 in Head Height 0.115 in Drive Size 2 Dimensional Standards ASME B18.6.3 For Maximum Material Thickness 1/4 in Pack Size 1 Each × $4.61 $4.61
TK141460238T Flat Washer Flat Washer Type Oversized Dimensional Standards ASME B18.22.1 Material Stainless Steel Material Grade/Class 18-8 Finish Plain For Screw Size 1/2 in Inside Diameter 0.531 in Outside Diameter 1 1/16 in Maximum Thickness 0.221 in Sy 1 Each × $7.90 $7.90
TK141460236T Lock Nut Finish Plain Material Stainless Steel Material Grade/Class 18-8 Thread Size 5/16 In.-18 Hex Width 1/2 in Hex Height 23/64 in Lock Type Nylon Insert Dimensional Standards ASME 18.2.1 ASME B18.16.6 Material Quality Standards Not Applic 1 Each × $4.96 $4.96
TK141460244T Wire Stripper/Cutter Stripping Capacity - Solid Wire 8 AWG 10 AWG 12 AWG 14 AWG 16 AWG 20 AWG Stripping Capacity- Cable Not Applicable Stripping Capacity- Stranded Wire 10 AWG 12 AWG 14 AWG 16 AWG 18 AWG 20 AWG 22 AWG Type Multi Functional Wi 1 Each × $46.04 $46.04
TK141460241T Extension Ladder Material Aluminum Industry Ladder Size 20 ft Extended Ladder Height 17 ft ANSI Type I Load Capacity 250 lb Adjustable Increments 12 in Bottom Width 17 1/2 in D1300-2 Series Rail Type Aluminum Shoe Design Swivel Rung Shape D-R 1 Each × $346.56 $346.56
Show all 35

Quick answers

How much is contract C716A4 worth?

Its contract amount is $1,279.

Which organization awarded contract C716A4?

Department of Environmental Protection in Florida awarded contract C716A4.

On GovTribe

See this award's full record

  • Every line item and file
  • The contract it was ordered under and its other orders
  • Similar state and local awards and opportunities
  • Ask GovTribe AI about this award
Try for free Login