Indefinite Delivery Contract FA812226D0004
- Not listed
- The federal contract IDV award is for the remanufacture of F108 fuel gear motors, a critical component for various military aircraft platforms. The prime contractor, Eaton Industrial Corporation, a subsidiary of Eaton Corporation Public Limited Company, has been awarded multiple firm fixed-price delivery orders by the U.S. Air Force Sustainment Center, a defense agency, to perform this remanufacturing work at their facility in Cleveland, Ohio. The total ceiling value of the contract IDV is...
- The Department of the Air Force Materiel Command Air Force Sustainment Center awarded Eaton Aerospace, LLC a single award indefinite delivery contract with a potential value of $734,265 to remanufacture F-15 hydraulic motor pumps. Eaton Aerospace will perform the work in Jackson, Mississippi as a subsidiary of Eaton Corporation PLC. Two firm fixed price delivery orders have been issued against this contract to date, totaling $580,554, for the remanufacture of hydraulic motor pumps in support...
- The U.S. Department of the Air Force Materiel Command Air Force Sustainment Center (AFSC) awarded Eaton Corporation, a multinational power management company, an indefinite delivery contract (IDC) to provide overhaul and maintenance services for critical components of the F-15 fighter aircraft. The contract, valued at up to $143,360, allows AFSC to issue task orders for the overhaul of F-15 fuel pump housing sections, a key component in maintaining the operational readiness of the Air Force's...
- Eaton Corp, operating as Eaton Aerospace Jackson, has been awarded a single-award Indefinite Delivery Contract by the Air Force Sustainment Center valued at $313,170.00 for the overhaul of F-15 fuel pump housing sections. The contract was awarded on August 18, 2025, with an ultimate completion date of August 17, 2026. This indefinite delivery vehicle was established without any set-aside provisions and enables the Air Force Sustainment Center to issue task orders for maintenance, repair, and...
- This single-award Indefinite Delivery Contract, valued at $4.76 million with an ultimate completion date of March 17, 2026, was awarded by the Air Force Sustainment Center to AAR Component Services - Grand Prairie, Inc. (a Triumph Group subsidiary) on September 18, 2020, following a pre-solicitation posted February 24, 2020. The contract encompasses the remanufacture and repair of F108 Turbine Clearance Control Valves (TCCV), critical engine components that regulate clearances in the F108...
- Eaton Corporation's Fuel & Motion Control Systems Division (Airframe) was awarded a single-award Indefinite Delivery Contract valued at $1.42 million by the Air Force Sustainment Center for the remanufacture of KC-135 air refueling and submerged pumps. The contract, awarded December 4, 2025, with an ultimate completion date of December 3, 2028, supports the sustainment of the United States Air Force's fleet of KC-135 Stratotanker aerial refueling aircraft. The contracted services encompass...
- Eaton Aerospace, LLC was awarded a single-award Indefinite Delivery Contract by the Air Force Sustainment Center (Ogden Air Logistics Complex) with a ceiling value of $2.82 million and a performance period extending through September 30, 2027. The contract supports spare parts and component replenishment for the KC-135 Stratotanker weapon system, a critical airborne refueling platform essential to U.S. military operations. No small business set-aside was utilized for this procurement, reflecting...
- The Air Force Sustainment Center awarded an IDIQ to Ethosenergy Accessories And Components, LLC on March 4, 2026, for supply and overhaul of F100-220/229 staged and unstaged fuel injection nozzles, with a contract ceiling of $9,499,980 and ultimate completion date of March 3, 2031. This is a single-award, non-set-aside contract. Work is performed in East Windsor, Connecticut. The procurement covers fuel nozzles delivering regulated fuel spray to combustion chambers across multiple National Stock...
- The Air Force Sustainment Center awarded a single-award indefinite-delivery contract to General Electric Company on March 6, 2009, with a ceiling value of $1,554,913,965.53 and ultimate completion date of December 31, 2011. This 9-year requirements contract procures firm fixed-price replenishment spares for the F110, F118, and F101 engines. Performance takes place in Wyoming, Ohio. The originating solicitation called for spare engine components to sustain Air Force engine fleets across three...
- The Air Force Sustainment Center awarded a single-award Indefinite Delivery Contract valued at $4.06 million to Woodward, Inc.'s Fuel Systems and Controls Division for the repair and overhaul of F107 main fuel control systems. The contract, effective from July 1, 2024 through June 30, 2029, establishes a flexible procurement mechanism for ongoing sustainment services supporting critical military aircraft platforms including the F-15, F-16, and B-52. No set-aside designation was applied to this...
The Air Force Sustainment Center awarded a single-award indefinite-delivery contract to Eaton Corp, operating as Eaton Aerospace Jackson, for remanufacture of F108 Fuel Gear Motors on April 20, 2026, with a contract ceiling of $2,550,135.84 and an ultimate completion date of April 19, 2031. The contract is not set-aside. Place of performance is at the contractor's FAA Part 145 rated facility, with coordination and oversight from Tinker Air Force Base in Oklahoma City, Oklahoma. The solicitation, posted September 15, 2025 with proposals due October 15, 2025, was issued as a sole-source procurement to restore inoperable F108 Fuel Gear Motors to serviceable condition with original life expectancy following Commercial Maintenance Manual procedures and implementing comprehensive quality assurance protocols. The contractor must remanufacture approximately 28 units annually, with delivery beginning at a rate of 15 units every 30 days during the base period, and provide all necessary materials and replacement parts while maintaining counterfeit prevention and detailed reporting including production reports and teardown deficiency reports. Contractors must maintain FAA Part 145 certification and an approved Source Approval Request prior to award. The contract is structured as a firm fixed-price supply contract for one base year with four one-year option periods, covering five years of potential performance. Work falls under NAICS code 336412 (Aircraft Engine and Engine Parts Manufacturing). The F108 Fuel Gear Motors are critical aerospace components that control engine bleed valve positions using high-pressure fuel systems.
Mod # | Description | ReasonForModification | Federal Obligation | Date |
|---|---|---|---|---|
| Not listed | Not listed | $0 | 4/19/26 |
Name | Description | Solicitation Number | FederalAgency | Type | PostedDate |
|---|---|---|---|---|---|
Remanufacture of F108 Fuel Gear Motor | FA812225R0024 | Department of the Air Force Materiel Command Air Force Sustainment Center | Solicitation 1/2 | 9/15/25, 4:16 PM | |
Remanufacture of F108 Fuel Gear Motor | FA812225R0024 | Department of the Air Force Materiel Command Air Force Sustainment Center | Award Notice 2/2 | 4/22/26, 12:55 PM |