Project Grant 2223083

Award Date 1/1/23
Completion Date 6/30/25
Dollars Obligated $275K
Federal Grant Program
47.084
Assistance Type
Project Grant
Place of Performance
Storrs, CT 06269, USA
Similar Awards
This $175,000 Project Grant awarded by the U.S. Department of Agriculture's National Institute of Food and Agriculture (NIFA) under the Small Business Innovation Research (SBIR) program focuses on developing an innovative membrane technology to upgrade livestock-derived biogas into renewable natural gas (RNG). The project aims to overcome the limitations of existing biogas upgrading technologies, which are often costly and inefficient, deterring many dairy farmers from utilizing their manure...
This National Science Foundation (NSF) Technology, Innovation, and Partnerships (CFDA 47.084) Project Grant award of $275,000 provides funding to Circularity Fuels, Inc., a small business located in Redwood City, CA, to develop a sorbent-enhanced catalytic process for upgrading biogas from wastewater treatment facilities into renewable natural gas (RNG). The project aims to increase the yield of RNG production by converting the carbon dioxide in the biogas into additional methane, while also...
This Project Grant from the National Science Foundation's Technology, Innovation, and Partnerships program, CFDA 47.084, provides $550,000 to develop an advanced membrane-contact reactor system for fuel alcohol production from distributed biomass and natural gas resources. The awardee, Power Environmental Energy Research Institute of Covina, California, will design a highly efficient methanol production process using a sweep liquid-facilitated membrane contact reactor. This integrated reactor...
This Project Grant award from the National Science Foundation's Engineering program (CFDA 47.041) provides $469,833 to the University of Florida to develop two-dimensional polymer membranes with precisely engineered gas-selective nanocavities. The goal is to create an energy-efficient, cost-competitive solution for separating gas molecules in industrial applications like carbon dioxide capture and petrochemical purification. The research will focus on designing macrocycle-based membranes that...
This Project Grant award from the National Science Foundation (NSF) Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) will develop a novel membrane separation technology to address the energy-efficient separation of small molecules from industrial process streams for a range of industries. The $275,000 award to Avanpore LLC, a for-profit limited liability company located in Woburn, MA, will run from October 1, 2024 to March 31, 2025. The project aims to create functionalized...
This $275,000 SBIR Phase I Project Grant was awarded by the National Science Foundation (NSF) under the Technology, Innovation, and Partnerships (CFDA 47.084) program. The project aims to develop a novel carbon sequestration method that utilizes existing wastewater disposal wells to safely and cost-effectively store biowastes such as human biosolids and agricultural manure. Key goals are to demonstrate the technical feasibility of injecting biowastes into the subsurface without causing issues...
This National Science Foundation (NSF) Engineering (CFDA 47.041) Project Grant award of $414,710.00 to the University of Miami aims to establish a controlled membrane fabrication process for morphology-controlled carbon molecular sieve membranes. The goal is to improve the performance and operability of membrane-based gas separation technologies, making them more competitive with energy-intensive conventional separation methods used in industrial gas service. The project will systematically...
This $273,910 Project Grant awarded by the National Science Foundation (NSF) under the Technology, Innovation, and Partnerships (CFDA 47.084) program supports research by Bluestem Biosciences Inc., a for-profit company in Omaha, Nebraska, to develop an improved proton ATPase enzyme that can enable the anaerobic biomanufacturing of organic acids like 3-hydroxypropionic acid. The project aims to modify yeast microbes to produce these valuable chemicals as natural byproducts, with a focus on...
This SBIR Phase I project, awarded by the National Science Foundation (NSF) under the Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084), aims to develop a novel liquid crystal polymer (LCP) called Tullomer to address limitations in fused deposition modeling (FDM) 3D printing. The $275,000 grant, awarded to Z-Polymers, Inc., will fund the optimization of Tullomer's monomer ratios, integration of nucleation additives, and control of mesogenic state formation to enhance...
This $274,042 Project Grant awarded by the National Science Foundation (NSF) under the NSF Technology, Innovation, and Partnerships (CFDA 47.084) program supports the development and demonstration of a bench-scale reactor for a high-temperature reverse water-gas shift (RWGS) process. The project aims to improve the materials and design of the RWGS reactor, which can produce electrofuels (e-fuels) from electricity, carbon dioxide, and hydrogen as a low-carbon alternative to fossil fuels,...

STTR PHASE I: THREE DIMENSIONAL (3D) PRINTED MIXED MATRIX MEMBRANES FOR BIOGAS UPGRADING -THE BROADER IMPACT /COMMERCIAL POTENTIAL OF THIS SMALL BUSINESS TECHNOLOGY TRANSFER (STTR) PHASE I PROJECT IS TO DERISK A NEW MEMBRANE MANUFACTURING TECHNOLOGY FOR BIOGAS UPGRADING. RENEWABLE NATURAL GAS (RNG) IS ATTRACTIVE AS A CARBON NEUTRAL ENERGY SOURCE AS IT IS DERIVED FROM ORGANIC WASTES SUCH AS FOOD WASTE, AGRICULTURAL WASTE, AND MUNICIPAL BIOSOLIDS. RNG IS PART OF BIOGAS AND REQUIRES COST- AND ENERGY-EFFECTIVE SEPARATION FROM CARBON DIOXIDE. THE COMPANY HAS DEVELOPED AN ADDITIVE MANUFACTURING TECHNOLOGY THAT ENABLES THE FABRICATION OF HIGH PERFORMANCE MEMBRANES TO ENABLE LOWER COST BIOGAS UPGRADING. THESE MEMBRANES OFFER ENERGY AND SYSTEM DESIGN BENEFITS OVER MORE TRADITIONAL SEPARATIONS TECHNOLOGIES FOR THE PRODUCTION OF RNG. THE MEMBRANE PRINTING APPROACH MAY LEAD TO THE PRODUCTION OF BEST-IN-CLASS MEMBRANES FOR RNG PRODUCTION AND COULD ENABLE CARBON CAPTURE AND UTILIZATION FROM BIOGAS SOURCES. THIS SMALL BUSINESS TECHNOLOGY TRANSFER (STTR) PHASE I PROJECT SEEKS TO DEMONSTRATE THE PRODUCTION OF MIXED MATRIX MEMBRANES (MMMS) COMPRISED OF POLYETHER BLOCK AMIDE POLYMER AND ZIF8 ZEOLITE. THE PROPOSED METHOD USES ELECTROSPRAY BASED ADDITIVE MANUFACTURING TO PRECISELY CONTROL MEMBRANE THICKNESS AND ZEOLITE LOADING, ALLOWING CUSTOMIZED MEMBRANE PROPERTIES FOR BIOGAS UPGRADING. FURTHERMORE, THE ADDITIVE MANUFACTURING, OR PRINTING, METHOD ENABLES INCREASED LOADING OF THE ZEOLITE OVER CONVENTIONAL CASTING TECHNIQUES WITHOUT THE FORMATION OF DEFECTS THAT WOULD LESSEN SELECTIVITY. THE GOALS OF THE PROJECT INCLUDE QUANTIFICATION OF THE MAXIMUM ZEOLITE LOADING WHILE AVOIDING LOSS OF SELECTIVITY. THE COMPANY WILL PRODUCE SMALL MEMBRANE LEAVES UP TO 1 FT2 IN AREA AND DEMONSTRATE CONSISTENT PERFORMANCE ACROSS THE LEAF USING MIXED GAS TESTING. THIS AWARD REFLECTS NSF'S STATUTORY MISSION AND HAS BEEN DEEMED WORTHY OF SUPPORT THROUGH EVALUATION USING THE FOUNDATION'S INTELLECTUAL MERIT AND BROADER IMPACTS REVIEW CRITERIA.

Posted 9/8/22, 12:00 AM