Project Grant 2216316
Award Date
9/1/22
Completion Date
8/31/25
Dollars Obligated
$306K
Funding Federal Agency
National Science Foundation
Awarding Federal Agency
Division of Chemical, Bioengineering, Environmental, and Transport System
Federal Grant Program
47.041
Assistance Type
Project Grant
Place of Performance
Raleigh, NC 27695, USA
Similar Awards
This $528,738 National Science Foundation project grant supports research titled "EXCELLENCE IN RESEARCH: CONVERGENT PHYSICS-BASED DATA-DRIVEN BIOPRINTING OF REGENERATIVE TISSUES FOR FUTURE BIOMANUFACTURING" being conducted at North Carolina Agricultural and Technical State University from August 1, 2021 to July 31, 2024. The grant was awarded by NSF's Division of Civil, Mechanical, and Manufacturing Innovation under the Engineering (ENG) program (CFDA 47.041), which seeks to foster...
This National Science Foundation (NSF) Integrative Activities (CFDA 47.083) Project Grant award of $461,544 to North Carolina Agricultural and Technical State University (NC A&T) aims to advance the development of a versatile 4D printing platform for creating mechanically reinforced, smart structures capable of self-actuation and self-disassembly. The research seeks to address challenges in 4D printing such as printing high-strength structures with precise shape-morphing properties and...
The $289,039 National Science Foundation Engineering grant funds the acquisition of a picosecond laser and electroplating system for North Carolina State University from September 2022 to August 2025. The university will use the new equipment to advance device manufacturing and materials processing capabilities in electronics, materials engineering, and biology research. Located in the university's nanofabrication facility, which is part of the Research Triangle Nanotechnology Network, the laser...
This National Science Foundation Project Grant of $466,388 supports research and education activities at the University of Texas Health Science Center at Houston from March 2023 through February 2028. The award is funded through the NSF's Engineering program (CFDA 47.041), which aims to improve engineering research and education. Specifically, the award will support the development of coaxial microfluidic bioprinting techniques to print ultrathin hydrogel layers with controlled biochemical and...
This $589,100 National Science Foundation Engineering Directorate Project Grant will fund the acquisition of a Nanoscribe Photonics Professional GT2 3D printer for precision medical device manufacturing at Michigan State University from September 1, 2022 to August 31, 2025. The printer will be housed in the university's Electrical and Computer Engineering Research Cleanroom, a shared research facility available to MSU researchers and external users. It will immediately benefit investigators from...
This $404,595 National Science Foundation (NSF) Engineering program grant, awarded to the University of Delaware on March 1, 2024, supports research to enhance multi-material additive manufacturing (3D printing) through the use of advective assembly techniques. The project aims to develop modular 3D printing nozzles capable of rapidly structuring and depositing multi-material composites at higher resolution and volumetric throughput than conventional methods. This could enable new applications...
This National Science Foundation Project Grant of $319,476 will fund research at the University of Virginia from March 2023 through February 2026 under the Engineering program (CFDA 47.041). The research aims to establish the foundational science for voxelated bioprinting through elucidating the nonlinear fluid dynamics of all-aqueous printing of viscoelastic droplets in yield-stress fluids. A printing platform will be developed to study droplet printing dynamics in real time. Control strategies...
This National Science Foundation (NSF) Integrative Activities (CFDA 47.083) program award of $911,200 supports the acquisition of a two-photon 3D printer capable of fabricating submicron-scale structures. The advanced manufacturing capabilities of this printer will enable researchers at The Washington University to develop novel devices, materials, and systems across disciplines including biology, medicine, physics, and engineering. The project will advance fundamental and applied research in...
The National Science Foundation awarded North Carolina Agricultural and Technical State University a $399,917 Project Grant under the Engineering federal grant program (CFDA 47.041) to develop a cyber-physical system framework for in-process quality assurance of inkjet-based additive manufacturing. The three-year project beginning July 1, 2021 will support research to create a quality assurance system that monitors the inkjet 3D printing process and ensures consistency and reliability of...
This National Science Foundation (NSF) Engineering (CFDA 47.041) Project Grant award to George Washington University aims to develop a 4D bioprinting technology to create soft robotic systems for targeted stem cell delivery. The $200,000 grant, awarded on September 1, 2024, will fund two specific aims: Synthesizing a multi-responsive, magnetically controllable bioink material for 4D bioprinting of structures. Fabricating soft robotic systems capable of loading, docking, and delivering neural...