Project Grant 1843840

This Project Grant award from the National Science Foundation (NSF) under the NSF Technology, Innovation, and Partnerships (CFDA 47.084) program provides $275,000 to Novineer, Inc. to develop novel approaches for optimizing the layout, fiber paths, and plastic infill distribution in 3D printed composite materials. The project aims to advance the state-of-the-art in additive manufacturing for end-use parts by creating automated design software that can tailor the material distribution to...

The National Science Foundation (NSF) awarded a $274,915 Small Business Innovation Research (SBIR) Phase I grant to Alternative Energy Materials, LLC, a small for-profit limited liability company based in Pullman, Washington. The grant, funded under the NSF Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084), supports the development of a novel dry powder pressing additive manufacturing technique for fabricating multifunctional ceramic monoliths with internal flow structures....

This Project Grant award from the National Science Foundation's Engineering program (CFDA 47.041) supports fundamental research by Arizona State University (ASU) to enable additive manufacturing of high-quality fiber-reinforced polymer composites through in-situ thermal polymerization of the matrix resin. The total award amount is $647,188 with a project period from November 1, 2024 to April 30, 2028. The research aims to develop a new composite manufacturing platform that uses a remote stimulus...

This National Science Foundation (NSF) Technology, Innovation, and Partnerships (CFDA 47.084) Phase I Small Business Innovation Research (SBIR) project grant, awarded to Meteora3D, Inc., will develop a rapid lift-based peel separation masked inverted stereolithography 3D printing technology for urgent procedural planning. The $275,000 award, effective December 1, 2024 through November 30, 2025, aims to advance scientific understanding and technological capabilities of desktop inverted vat...

The National Science Foundation awarded a $567,121 Project Grant to Michigan State University under the Engineering (47.041) federal grant program. The grant funds fundamental research to develop a new metal additive manufacturing process using light projection of mixtures of photopolymer and metal powder. Rather than point-by-point printing, the proposed process would use digital light projection to cure an entire layer of photopolymer mixed with metal powder. This could enable high-speed...

This SBIR Phase I project, awarded by the National Science Foundation (NSF) under the Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084), aims to develop a novel liquid crystal polymer (LCP) called Tullomer to address limitations in fused deposition modeling (FDM) 3D printing. The $275,000 grant, awarded to Z-Polymers, Inc., will fund the optimization of Tullomer's monomer ratios, integration of nucleation additives, and control of mesogenic state formation to enhance...

The National Science Foundation (NSF) awarded a $265,072 Project Grant to Perseus Materials, Inc. under the NSF Technology, Innovation, and Partnerships (CFDA 47.084) program. This Small Business Innovation Research (SBIR) Phase I project aims to establish the thermal and mechanical limits of novel, fiber-reinforced, plastic composite materials (FRPs) and pioneer a fast-manufacturing process for these FRPs. The project objectives are to enable widespread adoption of lightweight FRPs in...

This SBIR Phase I Project Grant award of $305,000 from the National Science Foundation's (NSF) Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) is advancing semiconductor processing technology. The project aims to develop a novel power generator and applicator system that uses nanosecond-scale high voltage pulses to enhance the quality, reduce processing steps, and lower costs of depositing super-thin coatings for advanced semiconductor manufacturing. The technology,...

The National Science Foundation (NSF) awarded a $275,000 Phase I Small Business Innovation Research (SBIR) grant to Raven Space Systems, Inc., a small disadvantaged business in Kansas City, KS. The grant, funded through the NSF Technology, Innovation, and Partnerships program (CFDA 47.084), aims to develop 3D printing capabilities for high-strength heat shield materials to enable fully 3D printed reentry capsules for space cargo return missions. The core innovation is a platform technology for...

This Cooperative Agreement award from the National Science Foundation's (NSF) Technology, Innovation, and Partnerships (TIP) program (CFDA 47.084) provides $1,000,000 to Iris Light Technologies Inc., a small business in Chicago, Illinois, to develop foundry-scale production of on-chip silicon photonic light emitters enabled by printed photonic ink. The project aims to create black phosphorus-based inks that can be integrated directly onto silicon photonic chips to produce on-chip lasers. This...