Asnis Screw Trays
Added: Jul 02, 2015 10:32 am This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is VA250-15-Q-0319 and is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect tough Federal Acquisition Circular 2005-72. This is unrestricted, brand name or equal requirement and will be awarded on all or none basis. Please note that the Government will perform technical review and on all products considered for this procurement and make a final determination if the products are acceptable. The associated NAICS code is 339112 and small business size standard is 500 employees. The requirement is for STRYKER ASNIS 2.0/3.0 CANNULATED SCREW SETS (OR EQUAL) AND STRYKER ASNIS 4.0 CANNULATED SCREW SETS (OR EQUAL). Delivery location is Cleveland Louis Stokes VAMC, 10701 East Boulevard, OH 44106 and shall be FOB destination. Delivery required within 30 days of contract award. Network Contracting Office (NCO) Columbus, OH requires the following items, brand name or equal: ASNIS MICRO, DIRECT MEASURING GAUGE 0.8/1.2 mm 2 2.0 mm ASNIS MICRO, CANNULATED SCREWDRIVER 2.0 mm, AO COUPLING 4 2.0 mm ASNIS MICRO, SOLID SCREWDRIVER, 2.0mm, AO COUPLING 2 2.0 mm ASNIS MICRO, HOLDING SLEEVE FOR 2.0mm SCREWS 2 2.0 mm ASNIS MICRO, DOUBLE DRILL GUIDE 0.8/1.7mm 2 2.0 mm ASNIS MICRO, SOLID DRILL 1.7mm, AO COUPLING 2 2.0 mm ASNIS MICRO, CLEANING STYLET 0.8mm 2 2.0 mm ASNIS MICRO, K-WIRE 0.8 mm X 100 mm 20 2.0 mm ASNIS MICRO CANNULATED TAP 2.0 mm AO COUPLING SINGLE USE 2 2.0 mm ASNIS MICRO CANNULATED COUNTERSINK 2.8mm AO COUPLING SINGLE USE 2 2.0 mm ASNIS MICRO CANNULATED DRILL 1.7 mm AO COUPLING SINGLE USE 2 3.0 mm ASNIS MICRO, CANNULATED SCREWDRIVER 3.0 mm, AO COUPLING 4 3.0 mm ASNIS MICRO, SOLID SCREWDRIVER 3.0mm, AO COUPLING 2 3.0 mm ASNIS MICRO, HOLDING SLEEVE FOR 3.0 mm SCREWS 2 3.0 mm ASNIS MICRO, DOUBLE DRILL GUIDE 1.2/2.1mm 2 3.0 mm ASNIS MICRO, SOLID DRILL 2.1mm, AO COUPLING 2 3.0 mm ASNIS MICRO, CLEANING STYLET 1.2mm 2 3.0 mm ASNIS MICRO, K-WIRE 1.2 mm X 100 mm 20 3.0 mm ASNIS MICRO CANNULATED DRILL 2.1mm AO COUPLING SINGLE USE 2 3.0 mm ASNIS MICRO CANNULATED TAP 3.0 mm AO COUPLING SINGLE USE 2 3.0 mm ASNIS MICRO CANNULATED COUNTERSINK 3.8mm AO COUPLING SINGLE USE 2 ASNIS MICRO ELASTOSIL HANDLE WITH AO QUICK COUPLING 4 SCREW FORCEPS 2 TRAY FOR ASNIS MICRO 2.0 AND 3.0 SYSTEM 2 ASNIS MICRO SCREW RACK FOR 2.0 AND 3.0 SCREWS 2 LID FOR STRYKER FOOT SOLUTIONS TRAY 2 2.0 mm ASNIS MICRO, CANNULATED SCREW, 8/4 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 10/4 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 11/5 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 12/5 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 13/6 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 14/6 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 15/6 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 16/7 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 18/5 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 19/5 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 20/5 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 22/5 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 24/6 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 26/6 mm 4 2.0 mm ASNIS MICRO, CANNULATED SCREW, 28/6 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 8/4 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 10/4 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 11/4 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 12/4 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 13/4 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 14/4 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 15/4 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 16/4 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 17/4 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 18/5 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 19/5 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 20/5 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 22/5 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 24/6 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 26/6 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 28/6 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 30/6 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 32/6 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 34/7 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 36/7 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 38/8 mm 4 3.0 mm ASNIS MICRO, CANNULATED SCREW, 40/8 mm 4 3.0 mm ASNIS MICRO, WASHER 3.0mm 16 ASNIS III 4.0mm PLASTIC LID 2 ASNIS III PLASTIC BASE 2 ASNIS III 4.0mm TRAY INSERT 2 ASNIS III 4.0mm SCREW RACK 2 DRILL GUIDE 1.4/2.7 2 MEASURING GAUGE-1.4/2.0 WIRES 2 CANN SCREWDRIVER HEX 2.5mm 2 HOLDING SLEEVE, 4.0mm SCREW 2 CLEANING WIRE 1.4 DIA. 2 CANN 2.7mm TWIST DRILL W/ AO F 2 CANN 4.0mm TAP W/ AO FITTING 2 CANN COUNTERSINK 4.0 W/ AO FIT 2 HANDLE WITH AO-QUICK CHUCK 2 SCREWDRIVER 2.5 HEX 115mm 2 4.0mm EXTRACTOR W/ T-HANDLE 2 DRILL BIT, 1.4X150mm 2 CANN SCREWDRIVER HEX 2.5mm/AO 2 ASNIS III SCREW FORCEPS 2 PARALLEL GUIDE FOR 1.4mm WIRES 2 CANN 4.0mm TWIST DRILL W/ AO 2 ASNIS III 1.4X150mm GUIDE WIRE 10 ASNIS III SS WASHER 4.0mm 12 ASNIS III SS CANNULATED SCR 4X14mm 6 ASNIS III SS CANNULATED SCR 4X16mm 6 ASNIS III SS CANNULATED SCR 4X18mm 6 ASNIS III SS CANNULATED SCR 4X20mm 6 ASNIS III SS CANNULATED SCR 4X22mm 6 ASNIS III SS CANNULATED SCR 4X24mm 6 ASNIS III SS CANNULATED SCR 4X26mm 6 ASNIS III SS CANNULATED SCR 4X28mm 6 ASNIS III SS CANNULATED SCR 4X30mm 6 ASNIS III SS CANNULATED SCR 4X32mm 6 ASNIS III SS CANNULATED SCR 4X34mm 6 ASNIS III SS CANNULATED SCR 4X36mm 6 ASNIS III SS CANNULATED SCR 4X38mm 6 ASNIS III SS CANNULATED SCR 4X40mm 6 ASNIS III SS CANNULATED SCR 4X42mm 6 ASNIS III SS CANNULATED SCR 4X44mm 6 ASNIS III SS CANN SCR 4X46MM 6 ASNIS III SS CANNULATED SCR 4X48mm 6 ASNIS III SS CANNULATED SCR 4X50mm 6 ASNIS III SS CANNULATED SCR 4X55mm 6 ASNIS III SS CANNULATED SCR 4X60mm 6 ASNIS III SS CANNULATED SCR 4X65mm 6 ASNIS III SS CANNULATED SCR 4X70mm 6 ASNIS III SS CANNULATED SCR 4X10mm 4 ASNIS III SS CANNULATED SCR 4X12mm 4 ASNIS III SS CANNULATED SCR 4X14mm 4 ASNIS III SS CANNULATED SCR 4X16mm 4 ASNIS III SS CANNULATED SCR 4X18mm 4 ASNIS III SS CANNULATED SCR 4X20mm 4 ASNIS III SS CANNULATED SCR 4X22mm 4 ASNIS III SS CANNULATED SCR 4X24mm 4 ASNIS III SS CANNULATED SCR 4X26mm 4 ASNIS III SS CANNULATED SCR 4X28mm 4 ASNIS III SS CANNULATED SCR 4X30mm 4 ASNIS III SS CANN SCR 4X32MM 4 ASNIS III SS CANN SCR 4X34MM 4 ASNIS III SS CANN SCR 4X36MM 4 ASNIS III SS CANN SCR 4X38MM 4 ASNIS III SS CANNULATED SCR 4X40mm 4 ASNIS III SS CANNULATED SCR 4X42mm 4 ASNIS III SS CANNULATED SCR 4X44mm 4 ASNIS III SS CANNULATED SCR 4X46mm 4 ASNIS III SS CANNULATED SCR 4X48mm 4 ASNIS III SS CANNULATED SCR 4X50mm 4 This announcement constitutes the only solicitation; a formal, written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This solicitation documents and incorporates provisions and clauses in effect tough FAC 2005-72. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: https://www.acquisition.gov/Far/. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-3, Offeror Representations and Certifications-Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications or confirm that the annual representations and certifications was completed electronically via the SAM website accessed tough http://www.acquisition.gov: FAR 52.212-4, Contract Terms and Conditions-Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.204-10, 52.209-6, 52.219-6, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.223-18, 52.225-1, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. Evaluation: will be made using the procedures under FAR 13. Offers will be evaluated on price and other factors. Other factors are Technical and Delivery Schedule. Offers should also include best expected delivery date. The following VAAR Clauses apply: 852.203-70 Commercial Advertising 852.211-70 Service Data Manuals 852.232-72 Electronic submission of payment requests 852.246-70 Guarantee 852.246-71 Inspection Quotations are to be submitted as all or none and emailed to Asril Yusuf at Asril.Yusuf@va.gov no later than July 13, 2015 at 1PM EST. VA25015Q0319 Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 10
7/2/15, 10:32 AM