Purchase Order SPE8E524V0354

This federal contract award, W911PT21A0001|W911PT23F0218, was issued by the TACOM Life Cycle Management Command (TACOM LCMC), a component of the U.S. Army, to Abrasive-Tool Company LLC, operating under the trade name Gauss Sales Co. The $6,710.00 firm-fixed-price contract is for the procurement of 6-inch by 3-inch wheels, National Stock Number 00X139400, with no set-aside designation. Abrasive-Tool Company LLC is a small business that has a significant Indefinite Delivery Vehicle (IDV) Blanket...

The General Services Administration (GSA) awarded Purchase Order number 59.30 to F&M Micro Products Inc. to deliver wheel, flap, abrasive, zirconia/alumina grinding wheels measuring 0.875 inches in arbor hole diameter and 4.500 inches in overall diameter with a 60 grit cloth backing. Performance will occur at the prime contractor's facility in Lake Balboa, California, starting on August 16, 2023 and concluding on November 14, 2023. The firm fixed price contract value for the abrasive...

GSA awarded a firm fixed-price purchase order valued at approximately $98 to F&M Micro Products Inc. to deliver abrasive aluminum oxide wheels measuring 0.250 inch thick with a 0.625-11 arbor hole and 4.500 inch diameter. Performance will occur in Lake Balboa, California under a three-month period of performance concluding in October 2023. The prime contractor will fulfill the agency's requirement for the specified wheel dimensions and composition to support GSA operations. No additional...

The General Services Administration awarded Wright Tool Company, LLC a $13,350 fixed price with economic price adjustment contract to supply abrasive flat wheels for Resource Conservation and Recovery Act program requirements. The wheels measure 4.5 inches in diameter with a .875 inch arbor hole and .125 inch thickness, and have a 20-25 degree grinding angle and 40 grit zirconia abrasive bonded to a cloth backing. Performance will occur in Warren, Michigan under the RC2 Blanket Purchase...

The General Services Administration awarded Purchase Order number 5345013609965 to F&M Micro Products Inc. for the delivery of five wheel, flap, abrasive, zirconia-aluminum oxide grinding discs valued at $256.40. The firm fixed price order calls for 60 grit depressed center discs with angled design, measuring 7.00 inches in diameter with a .875 inch arbor hole and cloth backing. Performance will occur in Lake Balboa, California over a period of one month concluding in mid-December. The award...

The General Services Administration awarded a delivery order against The Tools Man Inc.'s Multiple Award Schedule contract for tapered edge silicon carbide grinding wheels with a rubber binder. The wheels will measure 5/8 inch in diameter, have an arbor hole of 1/16 inch, and an overall thickness of 3/32 inch for use at speeds up to 25,000 revolutions per minute. With a potential value of $0, the order was awarded as a fixed price contract with economic price adjustment terms. Performance will...

This is a firm fixed-price purchase order contract awarded by the Defense Logistics Agency (DLA) to Carbide Tools For Industry, Inc., a self-certified small disadvantaged and veteran-owned business manufacturer of industrial cutting tools and abrasives based in Santa Ana, California. The contract, valued at $1,140.95, is for the procurement of National Stock Number 8511095710 - WHEEL, ABRASIVE. This award does not have a set-aside designation. Carbide Tools For Industry, Inc. has previously been...

The General Services Administration (GSA) awarded a firm fixed price purchase order valued at $367.70 to Kaufman Company, Inc. doing business as Kaufman Co Inc. for abrasive wheels meeting ANSI B74.2-2003 specifications. Performance will take place in Norwood, Massachusetts from November 7, 2023 through January 21, 2024. The order is for one wheel 4.5 inches in diameter and 0.045 inches thick, with a round arbor shape and 0.875 inch arbor size, to be used for GSA requirements. No...

This federal contract award, valued at $4,919.28, was issued by the Federal Acquisition Service (FAS) to F & M Micro Products Inc., a self-certified small disadvantaged business located in Lake Balboa, California. The contract is for the delivery of abrasive silicon carbide wheels with specific dimensions and characteristics, such as a 1.875-inch arbor hole, 7.00-inch diameter, and 1.250-inch wheel thickness. This is a firm-fixed-price Blanket Purchase Agreement (BPA) call, which means it is...

Giga, Inc. has been awarded a firm fixed price purchase order contract valued at fifty-five dollars by the General Services Administration (GSA) Federal Acquisition Service to deliver one WHEEL, ABRASIVE GRINDING, ALUMINUM OXIDE, DEPRESSED CENTER HUB, measuring 0.250 inch thick with a 625 inch 11-thread arbor hole and 7.00 inch in diameter. Performance will occur in Macon, Georgia. No set-aside designation was applied to this procurement for a single abrasive grinding wheel to support GSA...