Purchase Order 47QSWA23P17H3
Award Date
8/16/23
Potential Completion Date
11/14/23
Potential Value
$59
Federal Agency
Federal Acquisition Service
Awardee
F & M Micro Products Inc.
Ultimate Awardee
Not listed
NAICS Category
334111 - Electronic Computer Manufacturing
Federal Contract Vehicle
Set-Aside Type
No Set-Aside Used
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Lake Balboa, CA 91406, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
1
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
The General Services Administration (GSA) awarded Purchase Order number XXXXX to F & M Micro Products Inc. to deliver wheel, flap, abrasive discs made of zirconia/alumina with a 60 grit cloth backing and measuring 4.5 inches in diameter with a 0.875 inch arbor hole. The firm fixed price contract valued at $29,650 will provide the products from F & M Micro Products' facility in Lake Balboa, California and runs from September 8, 2023 through December 7, 2023. No subcontractors or set aside...
F & M Micro Products Inc. has been awarded a purchase order contract valued at fifty-nine thousand three hundred thirty dollars by the General Services Administration (GSA) Federal Acquisition Service to provide wheel, flap, abrasive, zirconia/alumina, 60 grit, cloth backing grinding wheels measuring 0.875 inches in arbor hole diameter and 4.500 inches in overall diameter. Performance will occur in Lake Balboa, California over a three-month period concluding in October 2023. Pricing is...
The General Services Administration awarded Purchase Order number 5345013609965 to F&M Micro Products Inc. for the delivery of five wheel, flap, abrasive, zirconia-aluminum oxide grinding discs valued at $256.40. The firm fixed price order calls for 60 grit depressed center discs with angled design, measuring 7.00 inches in diameter with a .875 inch arbor hole and cloth backing. Performance will occur in Lake Balboa, California over a period of one month concluding in mid-December. The award...
The General Services Administration (GSA) awarded a $224,400 purchase order to F&M Micro Products Inc. to deliver abrasive zirconium wheels measuring 0.125 inches thick with a 0.875 inch arbor hole and 4.5 inches in diameter. Performance will occur at the prime contractor's facility in Lake Balboa, California under a firm fixed price contract running from September 14, 2023 through December 13, 2023. The wheels will support GSA's ongoing needs for abrasive tools. No subcontractors or set...
The General Services Administration (GSA) awarded Purchase Order number XXXXX to F & M Micro Products Inc. to deliver wheel, flap, abrasive discs made of zirconia/alumina with a 60 grit cloth backing and 0.875 inch arbor hole. The firm fixed price contract valued at $29,650 will provide the discs measuring 4.500 inches in diameter to the GSA from F & M Micro Products' place of performance in Lake Balboa, California. The period of performance is July 19, 2023 through October 17, 2023....
The General Services Administration (GSA) awarded a firm fixed price purchase order to F&M Micro Products Inc. of Lake Balboa, California. The contract is to provide wheel, flap, abrasive, zirconia/alumina grinding discs that are 60 grit, with a cloth backing and 0.875 inch arbor hole with a diameter of 4.500 inches. Performance will take place in Lake Balboa from July 27, 2023 through October 25, 2023. GSA utilizes contracts such as this one to supply federal agencies with needed industrial...
The General Services Administration (GSA) awarded a purchase order contract valued at approximately $49,000 to F&M Micro Products Inc. to deliver abrasive aluminum oxide wheels measuring 0.250 inch thick with a 0.625-11 arbor hole and 4.500 inch diameter. Performance will occur at the prime contractor's facility in Lake Balboa, California under a firm fixed price arrangement. The wheels will support GSA operations from October 2023 through January 2024. No additional subcontractors or...
GSA awarded a firm fixed-price purchase order valued at $148,250 to F&M Micro Products Inc. to deliver abrasive wheel products. Specifically, the prime contractor will provide wheel, flap, abrasive, zirconia/alumina, 60 grit, cloth backing wheels measuring 0.875 inches for arbor holes and 4.5 inches in diameter. Performance will occur at the prime contractor's facility in Lake Balboa, California, starting in July 2023 and concluding in October 2023. No subcontractors or set aside...
The General Services Administration (GSA) awarded Purchase Order number XXXXX to F & M Micro Products Inc. to deliver silicon carbide abrasive wheels measuring 7.00 inches in diameter, 1.875 inches for the arbor hole, with a thickness of 1.250 inches. The firm fixed price contract valued at $1,779.76 will provide extra coarse 3-dimensional rigid cloth fiber fleece waterproof wheels for use by GSA. Performance will occur at the prime contractor's facility in Lake Balboa, California over a...
The General Services Administration (GSA) awarded a purchase order contract valued at approximately $45,000 to F&M Micro Products Inc. to deliver abrasive zirconium wheels measuring 0.125 inches thick with a 0.875 inch arbor hole and 4.5 inches in diameter. Performance will occur in Lake Balboa, California over a three-month period concluding in October 2023. The firm fixed price contract was awarded without any set aside designations and does not appear to be associated with a larger...