USNS TIPPECANOE (T-AO 199) LOP Parts
Added: Apr 16, 2018 9:16 am Please see attached combined synopsis/solicitation under N3220518Q4085 for the USNS TIPPECANOE (T-AO 199) LOP Parts N3220518Q4085 Department of the Navy Military Sealift Command
4/16/18, 9:16 AM USNS TIPPECANOE (T-AO 199) Lube Oil Purifer & Oily Water Seperator Parts
Added: Jan 18, 2018 3:48 pm Military Sealift Command THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation or Request for Quote/Proposal/Bid and no contract or purchase order will be awarded as a result of this notice. There is no solicitation, specifications, or drawings available at this time. The Government is not obligated to and will not pay for any information received from potential sources as a result of this sources sought notice.Military Sealift Command - Norfolk contracting office is seeking information on potential sources that can procure Original Equipment Manufacturer (OEM) GEA Westfalia Lube Oil Purifier (LOP) & Oily Water Separator (OWS) parts aboard the USNS TIPPECANOE (T-AO 199).The specific requirements are as follows:CLIN PART NO. DESCRIPTION UNIT QTY0001 2064-6600-040 BOWL COMPLETE, NO RETURN EACH 10002 2058-2213-040 DOUBLE CENTRIPETAL PUMP EACH 10003 2059-9926-010 SET OF TUBES EACH 10004 0018-7614-000 SOLENOID VALVE ASSEMBLY, COMP EACH 10005 0011-8060-000 SPHERICAL PLAIN BEARING EACH 60006 0008-3533-000 RUBBER METAL BUSHING EACH 80007 0005-0868-000 PROXIMITY SENSOR EACH 40008 2064-3429-010 SPINDLE EACH 20009 0021-3293-870 CLUTCH SHOE EACH 210010 2059-3483-000 DRIVER, BALANCE WITH HALF KEY EACH 20011 0011-6207-000 GROOVED BALL BEARING EACH 60012 0026-5866-170 SECURING RING EACH 50013 008-2008-000 BALL BEARING PROTECTION RING EACH 10014 0011-7304-250 ANGULAR CONTACT BALL BEARING EACH 100015 0010-5205-000 BEARING SLEEVE EACH 10016 0026-2501-400 DISTANCE SLEEVE EACH 10017 0011-6012-680 GROOVED BALL BEARING EACH 60018 0026-0851-170 SECURING RING EACH 60019 0026-6011-170 SECURING RING EACH 90020 0018-7614-920 PRESSURE REGULATOR EACH 30021 0018-7614-900 FILTER INSERT EACH 20022 0018-6654-010 SOLENOID EACH 40023 0018-5947-820 DIAPHRAGM EACH 110024 0018-7614-930 SOLENOID CORE EACH 40025 0018-7614-910 HOSE EACH 40026 0018-6654-030 SET OF SEALS EACH 40027 0018-7324-300 NON RETURN VALVE EACH 20028 0018-7324-300 NON RETURN VALVE EACH 50029 0018-1344-300 NON RETURN VALVE EACH 40030 9990-0245-891 PLATE HEAT EXCHANGER EACH 10031 0018-6588-300 OVERFLOW VALVE EACH 10032 0005-1533-300 PRESSURE TRANSMITTER EACH 20033 0018-7346-840 3/2 WAY SOLENOID VALVE EACH 10034 0018-7357-600 2/2 WAY SOLENOID VALVE EACH 10035 0018-3715-680 3/2 WAY SOLENOID VALVE EACH 10036 0018-7940-000 HOSE EACH 50037 0018-6085-600 NON RETURN VALVE EACH 10038 0001-1579-400 RESISTANCE THERMOMETER EACH 20039 0005-1475-010 LEVEL SWITCH EACH 20040 0021-3337-900 DRIVE BELT EACH 30041 0011-6012-680 GROOVED BALL BEARING EACH 40042 0018-1763-630 BALL TYPE COCK EACH 30043 0018-6419-030 CONNECTOR EACH 20044 0001-1572-600 PRESSURE GUAGE EACH 40045 0018-5118-040 CONNECTOR PLUG ELECTRICAL EACH 10046 2058-8839-000 NON RETURN HOSE EACH 100047 2058-8846-000 SCREW COUPLING WITH ORIFICE EACH 30048 0018-8012-000 LOW PRESSURE HOSE EACH 10049 0018-6035-030 CONNECTOR EACH 40050 0018-6656-010 CORRUGATED TUBE EACH 20051 0018-6652-000 CONNECTOR EACH 60052 0018-2477-030 SCREW COUPLING EACH 40053 2064-1464-000 LENGTH OF PIPE EACH 10054 0001-1457-800 SIGHT GLASS EACH 20055 0007-3414-750 GASKET EACH 20056 2059-3385-010 CENTIFUGAL CLUTCH EACH 60057 2066-3266-000 SPINDLE CAP EACH 100058 2066-1066-000 PROTECTIVE CAP EACH 30059 2064-3060-000 SET OF DRIVE PARTS EACH 10060 0007-2566-390 GASKET EACH 60061 0026-5841-170 SECURING RING EACH 40062 0007-1958-750 GASKET EACH 60063 0019-0960-360 SPINDLE SCREW EACH 40064 0007-2581-750 GASKET EACH 6Required delivery date (RDD) and location: RDD: 01 June 2018N40443 MSC SSU BATS SAN DIEGO9284 BALBOA AVE.SAN DIEGO, CA 92123All Small businesses, Service-Disabled Veteran-Owned Small Business, Certified HUBZone and Certified Section 8(a) Small Businesses are encouraged to respond. The Government will determine whether a set-aside acquisition in lieu of full and open competition is in the Government's best interest. MSC-Norfolk contracting office anticipates award of a contract no later than 01 May 2018. The NAICS Code for this procurement is 333318 - Other Commercial and Service Industry Machinery Manufacturing. It is requested that interested firms submit to MSC-Norfolk contracting office a brief capabilities package demonstrating ability to provide the requested items. This document shall address, at a minimum the following:(1) Company Profile to include number of employees, office location(s), DUNS number, CAGE Code and a statement regarding small business designation and status;(2) The facility where the work will be performed;(3) Partnership, teaming, joint ventures, or mentor-protégé agreements with any large businesses.Submission of a capabilities statement is not a prerequisite to any potential future offerings, but participation will assist the Government in tailoring requirement to be consistent with industry.RESPONSES ARE DUE by 25 January 2018 at 11:00 AM Eastern Standard Time. Responses shall be sent via mail to the following address: Military Sealift Command (MSC), Code N104-1 (Attn: Lindsay Bonnema), 471 East C Street, Norfolk, VA 23511. Email submissions of the capabilities packages WILL be accepted, please submit to lindsay.bonnema@navy.mil. Fax submissions of the capabilities packages WILL NOT be accepted. Questions or comments regarding this notice may be addressed to Contract Specialist Lindsay Bonnema at either of the above addresses. N32205-18-Q-4085 Department of the Navy Military Sealift Command
1/18/18, 3:48 PM