Incubator Annual Maintenance
Added: Aug 26, 2016 11:17 am Section A - Solicitation/Contract FormCLAUSES INCORPORATED BY FULL TEXTTIN: CAGE: DUNS:Vendor Point of Contact: Phone: Vendor email:Billing/Payment in Arrears.Naval Medical Center Contracting POC: Harold WoodleyPhone: 757-953-7276Fax: 757-953-5006Email: harold.d.woodley.civ@mail.milProduct/Services for:Naval Medical Center Portsmouth, Biomedical EngineeringPOC: HM2 Cody LeisterPhone: 757-953-5336Email: cody.n.leister.mil@mail.milVendor to reference RFQ number N00183-16-T-0208 on all inquires.Reference:PROMPT PAYMENTFor Prompt Payment Act Purposes, this contract is:Subject to the 7-calender day constructive acceptance period."AVAILABILITY OF FUNDS. Pursuant to Section I, Availability of Funds (FAR 52.232-18), of the contract, funds are not presently available for this contract. The Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing to the Contracting Officer.Note to vendors:• Government reserves the right to make award on an "all-or-none" basis.• Award to be best value based upon past performance and lowest price technically acceptable.Section B - Supplies or Services and Prices ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT0001 12 Months Annual MaintenanceFFPfor Incubator Units. See Section C for Statement of Work.FOB: DestinationMILSTRIP: N0018317RQ34021PURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000101 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN51003Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000102 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN51001Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000103 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN50999Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000104 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN51002Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000105 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50356Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000106 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50527Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000107 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50518Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000108 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50513Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000109 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50508Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000110 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50353Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000111 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGK52288Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000112 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGK52284Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000113 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50156Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000114 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50129Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000115 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50124Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000116 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50149Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000117 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50800Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000118 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50865Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000119 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50848Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000120 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL51025Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000121 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL51028Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000122 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: ZONE-CHARGE-2DTCSerial #: 1229533ZCLocation: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000123 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50914Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000124 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51152Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000125 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51157Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000126 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51166Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000127 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51293Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000128 Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51319Location: NMCP Biomedical EngineeringFOB: DestinationPURCHASE REQUEST NUMBER: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT0002 12 Months OPTION Annual MaintenanceFFPfor Incubator Units. See Section C for Statement of Work.FOB: DestinationMILSTRIP: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000201 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN51003Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000202 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN51001Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000203 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN50999Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000204 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN51002Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000205 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50356Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000206 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50527Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000207 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50518Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000208 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50513Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000209 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50508Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000210 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50353Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000211 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGK52288Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000212 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGK52284Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000213 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50156Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000214 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50129Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000215 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50124Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000216 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50149Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000217 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50800Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000218 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50865Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000219 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50848Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000220 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL51025Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000221 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL51028Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000222 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: ZONE-CHARGE-2DTCSerial #: 1229533ZCLocation: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000223 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50914Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000224 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51152Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000225 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51157Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000226 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51166Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000227 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51293Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000228 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51319Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT0003 12 Months OPTION Annual MaintenanceFFPfor Incubator Units. See Section C for Statement of Work.FOB: DestinationMILSTRIP: N0018317RQ34021NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000301 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN51003Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000302 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN51001Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000303 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN50999Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000304 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: INC EBASE ENG S-HUMID DR-N/SSerial #: HDHN51002Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000305 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50356Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000306 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50527Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000307 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50518Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000308 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50513Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000309 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50508Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000310 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50353Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000311 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGK52288Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000312 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGK52284Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000313 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50156Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000314 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50129Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000315 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50124Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000316 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50149Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000317 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50800Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000318 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50865Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000319 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL50848Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000320 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL51025Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000321 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGL51028Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000322 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: ZONE-CHARGE-2DTCSerial #: 1229533ZCLocation: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000323 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP50914Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000324 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51152Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000325 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51157Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000326 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51166Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000327 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51293Location: NMCP Biomedical EngineeringFOB: DestinationNET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT000328 OPTION Incubator UnitFFPManufacturer: Datex-OhmedaNomenclature: OMNIBED ENG EBASE S-HUMID DSerial #: HDGP51319Location: NMCP Biomedical EngineeringFOB: DestinationNET AMTSection C - Descriptions and SpecificationsCLAUSES INCORPORATED BY FULL TEXTSUP 5252.204-9400 Contractor Unclassified Access to Federally Controlled Facilities, Sensitive Information, Information Technology (IT) Systems or Protected Health Information (July 2013)Homeland Security Presidential Directive (HSPD)-12, requires government agencies to develop and implement Federal security standards for Federal employees and contractors. The Deputy Secretary of Defense Directive-Type Memorandum (DTM) 08-006 - "DoD Implementation of Homeland Security Presidential Directive - 12 (HSPD-12)" dated November 26, 2008 (or its subsequent DoD instruction) directs implementation of HSPD-12. This clause is in accordance with HSPD-12 and its implementing directives.APPLICABILITY This clause applies to contractor employees requiring physical access to any area of a federally controlled base, facility or activity and/or requiring access to a DoN or DoD computer/network/system to perform certain unclassified sensitive duties. This clause also applies to contractor employees who access Privacy Act and Protected Health Information, provide support associated with fiduciary duties, or perform duties that have been identified by DON as National Security Position, as advised by the command security manager. It is the responsibility of the responsible security officer of the command/facility where the work is performed to ensure compliance.Each contractor employee providing services at a Navy Command under this contract is required to obtain a Department of Defense Common Access Card (DoD CAC). Additionally, depending on the level of computer/network access, the contract employee will require a successful investigation as detailed below.ACCESS TO FEDERAL FACILITIES Per HSPD-12 and implementing guidance, all contractor employees working at a federally controlled base, facility or activity under this clause will require a DoD CAC. When access to a base, facility or activity is required contractor employees shall in-process with the Navy Command's Security Manager upon arrival to the Navy Command and shall out-process prior to their departure at the completion of the individual's performance under the contract.ACCESS TO DOD IT SYSTEMS In accordance with SECNAV M-5510.30, contractor employees who require access to DoN or DoD networks are categorized as IT-I, IT-II, or IT-III. The IT-II level, defined in detail in SECNAV M-5510.30, includes positions which require access to information protected under the Privacy Act, to include Protected Health Information (PHI). All contractor employees under this contract who require access to Privacy Act protected information are therefore categorized no lower than IT-II. IT Levels are determined by the requiring activity's Command Information Assurance Manager. Contractor employees requiring privileged or IT-I level access, (when specified by the terms of the contract) require a Single Scope Background Investigation (SSBI) which is a higher level investigation than the National Agency Check with Law and Credit (NACLC) described below. Due to the privileged system access, a SSBI suitable for High Risk public trusts positions is required. Individuals who have access to system control, monitoring, or administration functions (e.g. system administrator, database administrator) require training and certification to Information Assurance Technical Level 1, and must be trained and certified on the Operating System or Computing Environment they are required to maintain.Access to sensitive IT systems is contingent upon a favorably adjudicated background investigation. When access to IT systems is required for performance of the contractor employee's duties, such employees shall in-process with the Navy Command's Security Manager and Information Assurance Manager upon arrival to the Navy command and shall out-process prior to their departure at the completion of the individual's performance under the contract. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy Information Technology resources. The decision to authorize access to a government IT system/network is inherently governmental. The contractor supervisor is not authorized to sign the SAAR-Ni therefore, the government employee with knowledge of the system/network access required or the COR shall sign the SAAR-N as the "supervisor".The SAAR-N shall be forwarded to the Navy Command's Security Manager at least 30 days prior to the individual's start date. Failure to provide the required documentation at least 30 days prior to the individual's start date may result in delaying the individual's start date.When required to maintain access to required IT systems or networks, the contractor shall ensure that all employees requiring access complete annual Information Assurance (IA) training, and maintain a current requisite background investigation. The Contractor's Security Representative shall contact the Command Security Manager for guidance when reinvestigations are required.INTERIM ACCESS The Navy Command' s Security Manager may authorize issuance of a DoD CAC and interim access to a DoN or DoD unclassified computer/network upon a favorable review of the investigative questionnaire and advance favorable fingerprint results. When the results of the investigation are received and a favorable determination is not made, the contractor employee working on the contract under interim access will be denied access to the computer network and this denial will not relieve the contractor of his/her responsibility to perform.DENIAL OR TERMINATION OF ACCESS The potential consequences of any requirement under this clause including denial or termination of physical or system access in no way relieves the contractor from the requirement to execute performance under the contract within the timeframes specified in the contract. Contractors shall plan ahead in processing their employees and subcontractor employees. The contractor shall insert this clause in all subcontracts when the subcontractor is permitted to have unclassified access to a federally controlled facility, federally-controlled information system/network and/or to government information, meaning information not authorized for public release.CONTRACTOR'S SECURITY REPRESENTATIVE The contractor shall designate an employee to serve as the Contractor's Security Representative. Within tee work days after contract award, the contractor shall provide to the requiring activity's Security Manager and the Contracting Officer, in writing, the name, title, address and phone number for the Contractor's Security Representative. The Contractor's Security Representative shall be the primary point of contact on any security matter. The Contractor's Security Representative shall not be replaced or removed without prior notice to the Contracting Officer and Command Security Manager.BACKGROUND INVESTIGATION REQUIREMENTS AND SECURITY APPROVAL PROCESS FOR CONTRACTORS ASSIGNED TO NATIONAL SECURITY POSITIONS OR PERFORMING SENSITIVE DUTIES Navy security policy requires that all positions be given a sensitivity value based on level of risk factors to ensure appropriate protective measures are applied. Navy recognizes contractor employees under this contract as Non-Critical Sensitive [ADP/IT-II] when the contract scope of work require physical access to a federally controlled base, facility or activity and/or requiring access to a DoD computer/network, to perform unclassified sensitive duties. This designation is also applied to contractor employees who access Privacy Act and Protected Health Information (PHI), provide support associated with fiduciary duties, or perform duties that have been identified by DON as National Security Positions. At a minimum, each contractor employee must be a US citizen and have a favorably completed NACLC to obtain a favorable determination for assignment to a non-critical sensitive or IT-II position. The NACLC consists of a standard NAC and a FBI fingerprint check plus law enforcement checks and credit check. Each contractor employee filling a non-critical sensitive or IT-II position is required to complete:* SF-86 Questionnaire for National Security Positions (or equivalent OPM investigative product) * Two FD-258 Applicant Fingerprint Cards (or an electronic fingerprint submission) * Original Signed Release StatementsFailure to provide the required documentation at least 30 days prior to the individual's start date shall result in delaying the individual's start date. Background investigations shall be reinitiated as required to ensure investigations remain current (not older than 10 years) toughout the contract performance period. The Contractor's Security Representative shall contact the Command Security Manager for guidance when reinvestigations are required.Regardless of their duties or IT access requirements ALL contractor employees shall in-process with the Navy Command's Security Manager upon arrival to the Navy command and shall out-process prior to their departure at the completion of the individual's performance under the contract. Employees requiring IT access shall also check-in and check-out with the Navy Command's Information Assurance Manager. Completion and approval of a System Authorization Access Request Navy (SAAR-N) form is required for all individuals accessing Navy Information Technology resources. The SAAR-N shall be forwarded to the Navy Command's Security Manager at least 30 days prior to the individual's start date. Failure to provide the required documentation at least 30 days prior to the individual's start date shall result in delaying the individual's start date.The contractor shall ensure that each contract employee requiring access to IT systems or networks complete annual Information Assurance (IA) training, and maintain a current requisite background investigation. Contractor employees shall accurately complete the required investigative forms prior to submission to the Navy Command Security Manager. The Navy Command's Security Manager will review the submitted documentation for completeness prior to submitting it to the Office of Personnel Management (OPM). Suitability/security issues identified by the Navy may render the contractor employee ineligible for the assignment. An unfavorable determination made by the Navy is final (subject to SF-86 appeal procedures) and such a determination does not relieve the contractor from meeting any contractual obligation under the contract. The Navy Command's Security Manager will forward the required forms to OPM for processing. Once the investigation is complete, the results will be forwarded by OPM to the DON Central Adjudication Facility (CAF) for a determination.If the contractor employee already possesses a current favorably adjudicated investigation, the contractor shall submit a Visit Authorization Request (VAR) via the Joint Personnel Adjudication System (JPAS) or a hard copy VAR directly from the contractor's Security Representative. Although the contractor will take JPAS "Owning" role over the contractor employee, the Navy Command will take JPAS "Servicing" role over the contractor employee during the hiring process and for the duration of assignment under that contract. The contractor shall include the IT Position Category per SECNAV M-5510.30 for each employee designated on a VAR. The VAR requires annual renewal for the duration of the employee's performance under the contract.BACKGROUND INVESTIGATION REQUIREMENTS AND SECURITY APPROVAL PROCESS FOR CONTRACTORS ASSIGNED TO OR PERFORMING NON-SENSITIVE DUTIES Contractor employee whose work is unclassified and non-sensitive (e.g., performing certain duties such as lawn maintenance, vendor services, etc ...) and who require physical access to publicly accessible areas to perform those duties shall meet the following minimum requirements:* Must be either a US citizen or a US permanent resident with a minimum of 3 years legal residency in the United States (as required by The Deputy Secretary of Defense DTM 08-006 or its subsequent DoD instruction) and * Must have a favorably completed National Agency Check with Written Inquiries (NACI) including a FBI fingerprint check prior to installation access.To be considered for a favorable trustworthiness determination, the Contractor's Security Representative must submit for all employees each of the following:* SF-85 Questionnaire for Non-Sensitive Positions * Two FD-258 Applicant Fingerprint Cards (or an electronic fingerprint submission) * Original Signed Release StatementsThe contractor shall ensure each individual employee has a current favorably completed National Agency Check with Written Inquiries (NACI) or ensure successful FBI fingerprint results have been gained and investigation has been processed with OPM.Failure to provide the required documentation at least 30 days prior to the individual's start date may result in delaying the individual's start date.* Consult with your Command Security Manager and Information Assurance Manager for local policy when IT-III (non-sensitive) access is required for non-US citizens outside the United States. Statement of WorkContractor shall provide maintenance services in accordance with the items listed in Section B. Maintenance services shall include all replacement parts, components, on-site corrective repairs during normal working hours (8:00 A.M. to 4:30 P.M. Monday tough Friday excluding Federal holidays), 24-hour emergency service and routine preventive maintenance services to government-owned equipment, as listed on the: DD Form 1155 "Order for Supplies or Services". Maintenance services shall be provided on all systems, subsystem components, assemblies (i.e.: contractor responsible for total maintenance of entire system) and shall apply to hardware, firmware, and software, as appropriate, unless otherwise stated.1. Generala. The Contractor shall comply with Federal, State, and Local Laws, plus any Federal Regulations as applicable to the performance of this contract.b. The Contractor shall not accept any instructions issued by any person employed by the U. S. Government, other than: the Contracting Officer (KO) or designated representative all acting within the limits of their authority.c. The Contractor shall be qualified / authorized by the Original Equipment Manufacturer (OEM) in the repair of all equipment listed within this contract. Contractor shall maintain qualifications toughout entire contract period. Qualification includes, but is not limited to, the certification of all repair persons and repair facilities by the OEM as being trained / qualified to perform required repairs. Qualifications must be current (within 2 years). The Government shall maintain the right to seek proof of qualification prior to award and anytime during contract period of performance.2. Scope of Worka. The Contractor shall provide trained, experienced, English speaking personnel, labor, tools, diagnostic equipment, software, test phantoms, material, supplies, transportation, parts and equipment necessary to perform Preventive Maintenance (PM), Calibration (CAL), Safety testing (ST) and corrective maintenance.b. The Contractor shall provide telephonic communications with the Government to discuss technical matters relating to the performance of this contract. A systems operator will be made available to answer technical questions regarding system operations and applications.c. Equipment listed in this contract will be maintained to meet the original equipment manufacturer's (OEM's) specifications.d. Equipment and associated components shall be serviced as listed on: DD Form 1155, "Order for Supplies or Services".e. The Contractor Point of Contact (POC). The Contractor shall provide in writing the name and telephone number of a primary and alternate English-speaking individual to act as their representative for the scheduling and coordination of service calls, and to be responsible for the coordination of the contract with the Government.3. Government furnished property, Materials and Servicesa. The Contractor representative(s) at each site is encouraged to request a pre-maintenance inspection prior to the onset of the contract. As all apparent discrepancies must be identified upon submittal of quote, any and all claims must be received within 30 days of contract award or prior to contract start which ever occurs first. All non-apparent / hidden discrepancies must be identified no later that the first scheduled preventative maintenance. Any claims resulting from hidden defects must be received within 30 days of first scheduled preventative maintenance. Any equipment found to be inoperable during this pre-maintenance inspection would be repaired using a separate purchase order. The cost of repairs shall not exceed contractor's normal retail rate for required repairs. The government certifies that the equipment to be maintained under this contract will be in good operating condition on the effective date of this contract. For the purpose of this contract, the clause, "good operating condition" means the conditions necessary for the equipment to function as intended without corrective maintenance. The Contractor agrees to leave the equipment in good operating condition at the expiration of this contract. During the final week of this contract, the Government will make final inspection of the equipment. Any correction of deficiencies noted during this inspection shall be resolved prior to contract end. The Government reserves the right to request the repair (at no additional cost to the Government) of items identified with latten defects after contract termination, when it has been determined that defects either are a result of contractor's performance or should have been discovered during normal performance of work under this contract.b. The government will be responsible for maintaining the proper environment, including utilities and site requirements necessary for the system to function properly as specified by the OEM.c. The Government will operate the system in accordance with the instruction manual provided by the OEM.d. The Government will not be responsible for the damage or loss due to fire, theft, accident, or other disaster of Contractor supplies, materials, or for the personal belongings brought onto Government property by Contractor's personnel.4. Contractor Furnished Property and Materiala. The Contractor shall provide all service literature, reference publications, laptop computers and diagnostic software to be used by the contractor service technicians and as required for the completion of the services in accordance with this contract.5. Replacement Partsa. The Contractor shall have ready access to unique and/or high mortality replacement parts. All parts supplied shall be compatible with the existing system. In the event that replacements parts are required to be shipped. Shipping shall be performed in the fastest reasonable means possible (i.e., next day air) at no additional cost to the Government.b. The Contractor shall at their expense, replace all worn or defective parts necessary to restore the equipment to 100% operational condition as specified by the OEM.c. Contractor installed replacement parts shall become the property of the Government and the replaced malfunctioning part shall become the property of the Contractor. Replaced items shall be properly disposed of at no additional cost to the Government (contractor to pay all "environmental fees" where required).d. Freight, postage, and storage charges associated with shipment and receipt of replacement parts, and the return of parts shall be the responsibility of the Contractor.e. All replacement parts shall be new and certified as OEM replacement parts. In the event that new parts are not available, rebuilt parts and sub-assemblies are allowed provided that they are warranted to be free of defects for a period of time that meets or exceeds warranties of similar replacement parts. The contractor shall specifically annotate on the final Field Service report the use and identification of rebuilt parts and the period of warranty. When discrepancies occur, the Government will make the final determination on whether a replacement part is of equal or better quality.f. The Contractor must include software revisions and updates (field service changes), which are required due to FDA, or manufacturer announced safety-hazard recall, to include FDA Year 2000 Compliance Directive, as part of the contract at no additional cost to the Government. Updates shall be performed as soon as possible after release, but no later than the first scheduled Preventative Maintenance Inspection after release. For any updates that have been identified as critical, or required for the proper operation of equipment by the OEM, contractor shall provide installation within 30 days of release regardless of Preventative Maintenance Schedules.6. Contractor Report Requirementsa. During normal duty hours, Contracted Field Service Engineer (FSE) personnel shall check-in with the Biomedical Engineering Division upon arrival at the Government site and again prior to departure. (Biomedical Engineering located in Build-NH-100 1st floor; 910-450-4944). The Contractor FSEs shall personally notify Biomedical Engineering (BME) of problems that result in the equipment being left disabled upon their departure. After normal duty hours, Contractor FSE's shall notify the Officer of the Day Desk (Bldg NH-100, Quarterdeck, 1st Floor) and the systems operator designated by BME.b. The Contractor shall provide to BME a full service report within two (2) days after completion of all service performed. The service report shall include, but not be limited to: contract number, equipment description (model, serial number, equipment control number) contractor's log number, detailed description of the service(s) performed, replacement part(s) information (part number, part value, nomenclature, unit price, manufacturer, if not OEM, and whether the part is new/used/reconditioned), the completion date and time, man-hours expended and the hourly rate normally charged for the type of service performed, model and serial numbers, and the name of the FSE performing the service. In the event that agents / sub-contractor's are used in the performance of repairs, said agent shall be identified on the service report by company name and contact information (i.e., telephone number). Additionally contractor will be required to affix a tag on equipment upon the completion of a preventative maintenance inspection. Tag may either be a "sticker" or "hanging tag". As a minimum the tag shall contain: the name of the contractor, technician performing inspection and date of inspection legibly printed.7. Contractor Responsibilitya. The Contractor shall be responsible for the repair/replacement of damaged Government owned equipment and property due to the negligence of the Contractor or his representatives. All such replacement or repair shall be at the Contractor's expense and shall be inspected to the satisfaction of the KO or appointed representative.8. Preventive Maintenance Servicesa. In accordance with Naval Medical Logistics Command (NAVMEDLOGCOM) Risk Assessment Criteria, preventive maintenance shall be performed in accordance with the Original Equipment Manufactures (OEM) recommendations.b. The Government shall select the months in which preventive maintenance services are to be performed. The preventative maintenance visits shall be performed during the following month: NOVEMBERThe Contractor shall schedule and complete preventive maintenance services prior to the 15th of the selected month.c. All test equipment used in the performance of this contract must be calibrated (if required / as required by manufacture of test equipment) and shall be in compliance with Joint Commission on Accreditation of Healthcare Organizations (JCAHO), Original Equipment Manufacturer (OEM) and Federal Drug Administration (FDA) standards as required.9. Corrective Maintenancea. Normal Working Hour Maintenance Coverage will be Monday tough Friday, between 8:00 A.M. to 4:30 P.M. A contractor Service Tech shall respond via telephone within 2 hours after receipt of trouble call, and provide on-site service no later than the close of business (4:30 pm) on the next business day. Equipment shall be operational within 48 hours. The Government reserves the right to deduct from the Contractor's payment an amount not to exceed the hourly rate of $50.00 per hour for each hour the Contractor fails to respond, as specified in the contract.a. In the event that emergency service outside the normal working hours are required by the Government, additional work shall be billable to the Government at published commercial rates, and negotiated and approved by a Contracting Officer prior to services rendered.b. Government request for corrective maintenance will be placed by BME, to the Contractor's POC. Corrective Maintenance shall be completed during the hours specified in the contract.c. The Contractor shall assign a unique Log/Reference Number to each Government request for corrective Maintenance.d. Contractor's response to requests for service may include telephone consultation with the equipment user/operator and a Contractor FSE. Telephone consultation shall: 1) provide instruction in determining operator error; 2) to determine the most likely cause of the problem; 3) to determine if resolution of the problem requires the dispatch of a FSE; and 4) to identify replacement parts likely to be required in order to return the equipment to 100% operational condition as specified by the OEM.e. Contractor's pricing shall be inclusive of all cost including parts, labor, travel and shipping, unless otherwise indicated. Any/all exclusions are listed as follows:f. The Contractor shall have his/her own service manuals, specifications, schematic diagrams, and parts lists to assist in the evaluation/repair of all equipment included in this contract.10. Removal of Government Propertya. Whenever the repair of equipment cannot be performed at the Government site as determined by the Contractor, the Contractor shall notify BME who will make arrangements for the Contractor to remove the item from Naval Hospital Camp Lejeune (i.e. obtain property pass for material) to the Contractor's designated site. The Contractor may be required to sign a Government form accepting responsibility for the Government equipment. The Contractor shall provide a detailed description of removed items. For associated items / accessories, contractor to provide a detailed description and quantities of items to be removed. Description to include as a minimum manufacturers serial numbers and equipment control number (ECN) of all equipment / items removed. In the event that items / sub-assemblies / accessories are repaired via "Repair by Replacement" a detailed description of replaced items is to be included upon return of repaired components.b. All charges resulting from a Contractor determined requirement to transport Government owned property, covered by this contract, to and from an alternate repair location shall be the responsibility of the Contractor.11. Equipment Modification Upgradesa. The Contractor shall only incorporate OEM specified modifications, alterations and upgrades. Approval shall be obtained from BME prior to the Contractor installation of any modification, alteration, or upgrades.b. The Contractor shall maintain contact with the OEM to determine the requirement for field modifications and to ensure accomplishment of these modifications in accordance with the time schedule set forth by the OEM.c. The Government shall not alter the system without prior notification to the Contractor.d. The contractor at no additional cost shall provide software updates to the Government. Installation of updates will be left to the discretion of the Government. All supplied software is to be warranted current and free of defects such as viruses.12. Service Beyond the Scope of the Contracta. The Contractor shall immediately, but not later than 24 consecutive hours after discovery, notify BME, in writing, of the existence or the development of any defects in, or repair required to the scheduled equipment, which the Contractor considers they are not responsible for under the terms of this contract.b. At the same time of the notification, the Contractor shall furnish BME with written estimate of the cost to make the necessary repairs. Repairs considered by the Contracting Officer to be outside the scope of this contract shall not be covered under this contract, but shall be ordered under a separate purchase order. Section E - Inspection and Acceptance INSPECTION AND ACCEPTANCE TERMSSupplies/services will be inspected/accepted at:CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 Destination Government Destination Government 000101 N/A N/A N/A Government 000102 N/A N/A N/A Government 000103 N/A N/A N/A Government 000104 N/A N/A N/A Government 000105 N/A N/A N/A Government 000106 N/A N/A N/A Government 000107 N/A N/A N/A Government 000108 N/A N/A N/A Government 000109 N/A N/A N/A Government 000110 N/A N/A N/A Government 000111 N/A N/A N/A Government 000112 N/A N/A N/A Government 000113 N/A N/A N/A Government 000114 N/A N/A N/A Government 000115 N/A N/A N/A Government 000116 N/A N/A N/A Government 000117 N/A N/A N/A Government 000118 N/A N/A N/A Government 000119 N/A N/A N/A Government 000120 N/A N/A N/A Government 000121 N/A N/A N/A Government 000122 N/A N/A N/A Government 000123 N/A N/A N/A Government 000124 N/A N/A N/A Government 000125 N/A N/A N/A Government 000126 N/A N/A N/A Government 000127 N/A N/A N/A Government 000128 N/A N/A N/A Government 0002 Destination Government Destination Government 000201 N/A N/A N/A Government 000202 N/A N/A N/A Government 000203 N/A N/A N/A Government 000204 N/A N/A N/A Government 000205 N/A N/A N/A Government 000206 N/A N/A N/A Government 000207 N/A N/A N/A Government 000208 N/A N/A N/A Government 000209 N/A N/A N/A Government 000210 N/A N/A N/A Government 000211 N/A N/A N/A Government 000212 N/A N/A N/A Government 000213 N/A N/A N/A Government 000214 N/A N/A N/A Government 000215 N/A N/A N/A Government 000216 N/A N/A N/A Government 000217 N/A N/A N/A Government 000218 N/A N/A N/A Government 000219 N/A N/A N/A Government 000220 N/A N/A N/A Government 000221 N/A N/A N/A Government 000222 N/A N/A N/A Government 000223 N/A N/A N/A Government 000224 N/A N/A N/A Government 000225 N/A N/A N/A Government 000226 N/A N/A N/A Government 000227 N/A N/A N/A Government 000228 N/A N/A N/A Government 0003 Destination Government Destination Government 000301 N/A N/A N/A Government 000302 N/A N/A N/A Government 000303 N/A N/A N/A Government 000304 N/A N/A N/A Government 000305 N/A N/A N/A Government 000306 N/A N/A N/A Government 000307 N/A N/A N/A Government 000308 N/A N/A N/A Government 000309 N/A N/A N/A Government 000310 N/A N/A N/A Government 000311 N/A N/A N/A Government 000312 N/A N/A N/A Government 000313 N/A N/A N/A Government 000314 N/A N/A N/A Government 000315 N/A N/A N/A Government 000316 N/A N/A N/A Government 000317 N/A N/A N/A Government 000318 N/A N/A N/A Government 000319 N/A N/A N/A Government 000320 N/A N/A N/A Government 000321 N/A N/A N/A Government 000322 N/A N/A N/A Government 000323 N/A N/A N/A Government 000324 N/A N/A N/A Government 000325 N/A N/A N/A Government 000326 N/A N/A N/A Government 000327 N/A N/A N/A Government 000328 N/A N/A N/A GovernmentSection F - Deliveries or Performance DELIVERY INFORMATIONCLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC 0001 POP 01-OCT-2016 TO30-SEP-2017 N/A NAVAL MEDICAL CENTERBIOMEDICAL ENGINEERING54 LEWIS MINOR STREETBLDG. 250PORTSMOUTH VA 23708-2297757-953-5336FOB: Destination N00183 000101 N/A N/A N/A N/A 000102 N/A N/A N/A N/A 000103 N/A N/A N/A N/A 000104 N/A N/A N/A N/A 000105 N/A N/A N/A N/A 000106 N/A N/A N/A N/A 000107 N/A N/A N/A N/A 000108 N/A N/A N/A N/A 000109 N/A N/A N/A N/A 000110 N/A N/A N/A N/A 000111 N/A N/A N/A N/A 000112 N/A N/A N/A N/A 000113 N/A N/A N/A N/A 000114 N/A N/A N/A N/A 000115 N/A N/A N/A N/A 000116 N/A N/A N/A N/A 000117 N/A N/A N/A N/A 000118 N/A N/A N/A N/A 000119 N/A N/A N/A N/A 000120 N/A N/A N/A N/A 000121 N/A N/A N/A N/A 000122 N/A N/A N/A N/A 000123 N/A N/A N/A N/A 000124 N/A N/A N/A N/A 000125 N/A N/A N/A N/A 000126 N/A N/A N/A N/A 000127 N/A N/A N/A N/A 000128 N/A N/A N/A N/A 0002 POP 01-OCT-2017 TO30-SEP-2018 N/A NAVAL MEDICAL CENTERBIOMEDICAL ENGINEERING54 LEWIS MINOR STREETBLDG. 250PORTSMOUTH VA 23708-2297757-953-5336FOB: Destination N00183 000201 N/A N/A N/A N/A 000202 N/A N/A N/A N/A 000203 N/A N/A N/A N/A 000204 N/A N/A N/A N/A 000205 N/A N/A N/A N/A 000206 N/A N/A N/A N/A 000207 N/A N/A N/A N/A 000208 N/A N/A N/A N/A 000209 N/A N/A N/A N/A 000210 N/A N/A N/A N/A 000211 N/A N/A N/A N/A 000212 N/A N/A N/A N/A 000213 N/A N/A N/A N/A 000214 N/A N/A N/A N/A 000215 N/A N/A N/A N/A 000216 N/A N/A N/A N/A 000217 N/A N/A N/A N/A 000218 N/A N/A N/A N/A 000219 N/A N/A N/A N/A 000220 N/A N/A N/A N/A 000221 N/A N/A N/A N/A 000222 N/A N/A N/A N/A 000223 N/A N/A N/A N/A 000224 N/A N/A N/A N/A 000225 N/A N/A N/A N/A 000226 N/A N/A N/A N/A 000227 N/A N/A N/A N/A 000228 N/A N/A N/A N/A 0003 POP 01-OCT-2018 TO30-SEP-2019 N/A NAVAL MEDICAL CENTERBIOMEDICAL ENGINEERING54 LEWIS MINOR STREETBLDG. 250PORTSMOUTH VA 23708-2297757-953-5336FOB: Destination N00183 000301 N/A N/A N/A N/A 000302 N/A N/A N/A N/A 000303 N/A N/A N/A N/A 000304 N/A N/A N/A N/A 000305 N/A N/A N/A N/A 000306 N/A N/A N/A N/A 000307 N/A N/A N/A N/A 000308 N/A N/A N/A N/A 000309 N/A N/A N/A N/A 000310 N/A N/A N/A N/A 000311 N/A N/A N/A N/A 000312 N/A N/A N/A N/A 000313 N/A N/A N/A N/A 000314 N/A N/A N/A N/A 000315 N/A N/A N/A N/A 000316 N/A N/A N/A N/A 000317 N/A N/A N/A N/A 000318 N/A N/A N/A N/A 000319 N/A N/A N/A N/A 000320 N/A N/A N/A N/A 000321 N/A N/A N/A N/A 000322 N/A N/A N/A N/A 000323 N/A N/A N/A N/A 000324 N/A N/A N/A N/A 000325 N/A N/A N/A N/A 000326 N/A N/A N/A N/A 000327 N/A N/A N/A N/A 000328 N/A N/A N/A N/A CLAUSES INCORPORATED BY REFERENCE52.242-15 Stop-Work Order AUG 1989 Section G - Contract Administration Data CLAUSES INCORPORATED BY FULL TEXT252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JUN 2012)(a) Definitions. As used in this clause--"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization."Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF)."Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.(c) WAWF access. To access WAWF, the Contractor shall--(1) Have a designated electronic business point of contact in the Central Contractor Registration at https://www.acquisition.gov; and(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests tough WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/.(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:(1) Document type. The Contractor shall use the following document type(s).2 IN 1 SERVICES ONLY-----------------------------------------------------------------------(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.DESTINATION / DESTINATION-----------------------------------------------------------------------(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in thesystem.Routing Data Table*Field Name in WAWF Data to be entered in WAWFPay Official DoDAAC HQ0248Issue By DoDAAC N00183Admin DoDAAC N00183Inspect By DoDAAC N/AShip To Code N/AShip From Code N/AMark For Code N/AService Approver (DoDAAC) N/AService Acceptor (DoDAAC) N00183Accept at Other DoDAAC N/ALPO DoDAAC N00183DCAA Auditor DoDAAC N/AOther DoDAAC(s) N/A(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.(5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system.WAWF Acceptor/COR Email Address: charles.k.lovell2.civ@mail.mil -----------------------------------------------------------------------(g) WAWF point of contact.(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.usn.detrick.navmedlogcomftdmd.list.nmlc-wafwf@mail.mil -----------------------------------------------------------------------(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.(End of clause)Section H - Special Contract RequirementsCLAUSES INCORPORATED BY FULL TEXTNMCARS 5237.102-90 Enterprise-wide Contractor Manpower Reporting Application (ECMRA)The contractor shall report contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the [NAMED COMPONENT] via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:(1) W, Lease/Rental of Equipment; (2) X, Lease/Rental of Facilities; (3) Y, Construction of Structures and Facilities; (4) S, Utilities ONLY; (5) V, Freight and Shipping ONLY. The contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 tough September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil.(End of Text) PRIVACY AND SECURITY OF PROTECTED HEALTH INFORMATION1. IntroductionIn accordance with DoD 6025.18-R "Department of Defense Health Information Privacy Regulation," January 24, 2003, the Contractor meets the definition of Business Associate. Therefore, a Business Associate Agreement is required to comply with both the Health Insurance Portability and Accountability Act (HIPAA) Privacy and Security regulations. This clause serves as that agreement whereby the Business Associate agrees to abide by all applicable HIPAA Privacy and Security requirements regarding health information as defined in this clause, and in DoD 6025.18-R and DoD 8580.02, as amended. Additional requirements will be addressed when implemented.a. Definitions. As used in this clause generally refer to the Code of Federal Regulations (CFR) definition unless a more specific provision exists in DoD 6025.18-R or DoD 8580.02.(1) HITECH Act shall mean the Health Information Technology for Economic and Clinical Health Act included in the American Recovery and Reinvestment Act of 2009.(2) Individual has the same meaning as the term "individual" in 45 CFR 160.103 and shall include a person who qualifies as a personal representative in accordance with 45 CFR 164.502(g).(3) Privacy Rule means the Standards for Privacy of Individually Identifiable Health Information at 45 CFR part 160 and part 164, subparts A and E.(4) Protected Health Information has the same meaning as the term "protected health information" in 45 CFR 160.103, limited to the information created or received by the Business Associate from or on behalf of the Government pursuant to the Contract.(5) Electronic Protected Health Information has the same meaning as the term "electronic protected health information" in 45 CFR 160.103.(6) Required by Law has the same meaning as the term "required by law" in 45 CFR 164.103.(7) Secretary means the Secretary of the Department of Health and Human Services or his/her designee.(8) Security Incident will have the same meaning as the term "security incident" in 45 CFR 164.304, limited to the information created or received by Business Associate from or on behalf of Covered Entity.(9) Security Rule means the Health Insurance Reform: Security Standards at 45 CFR part 160, 162 and part 164, subpart C.(10) Terms used, but not otherwise defined, in this Clause shall have the same meaning as those terms in 45 CFR 160.103, 160.502, 164.103, 164.304, and 164.501.b. The Business Associate shall not use or further disclose Protected Health Information other than as permitted or required by the Contract or as Required by Law.c. The Business Associate shall use appropriate safeguards to maintain the privacy of the Protected Health Information and to prevent use or disclosure of the Protected Health Information other than as provided for by this Contract.d. The HIPAA Security administrative, physical, and technical safeguards in 45 CFR 164.308, 164.310, and 164.312, and the requirements for policies and procedures and documentation in 45 CFR 164.316 shall apply to Business Associate. The additional requirements of Title XIII of the HITECH Act that relate to the security and that are made applicable with respect to covered entities shall also be applicable to Business Associate. The Business Associate agrees to use administrative, physical, and technical safeguards that reasonably and appropriately protect the confidentiality, integrity, and availability of the electronic protected health information that it creates, receives, maintains, or transmits in the execution of this Contract.e. The Business Associate shall, at their own expense, take action to mitigate, to the extent practicable, any harmful effect that is known to the Business Associate of a use or disclosure of Protected Health Information by the Business Associate in violation of the requirements of this Clause. These mitigation actions will include as a minimum those listed in the TMA Breach Notification Standard Operating Procedure (SOP), which is available at: http://www.tricare.mil/tmaprivacy/breach.cfmf. The Business Associate shall report to the Government any security incident involving protected health information of which it becomes aware.g. The Business Associate shall report to the Government any use or disclosure of the Protected Health Information not provided for by this Contract of which the Business Associate becomes aware.h. The Business Associate shall ensure that any agent, including a sub Business Associate, to whom it provides Protected Health Information received from, or created or received by the Business Associate, on behalf of the Government, agrees to the same restrictions and conditions that apply tough this Contract to the Business Associate with respect to such information.i. The Business Associate shall ensure that any agent, including a subBusiness Associate, to whom it provides electronic Protected Health Information, agrees to implement reasonable and appropriate safeguards to protect it.j. The Business Associate shall provide access, at the request of the Government, and in the time and manner reasonably designated by the Government to Protected Health Information in a Designated Record Set, to the Government or, as directed by the Government, to an Individual in order to meet the requirements under 45 CFR 164.524.k. The Business Associate shall make any amendment(s) to Protected HealthInformation in a Designated Record Set that the Government directs or agrees to pursuant to 45 CFR 164.526 at the request of the Government, and in the time and manner reasonably designated by the Government.l. The Business Associate shall make internal practices, books, and records relating to the use and disclosure of Protected Health Information received from, or created or received by the Business Associate, on behalf of the Government, available to the Government, or at the request of the Government to the Secretary, in a time and manner reasonably designated by the Government or the Secretary, for purposes of the Secretary determining the Government's compliance with the Privacy Rule.m. The Business Associate shall document such disclosures of Protected Health Information and information related to such disclosures as would be required for the Government to respond to a request by an Individual for an accounting of disclosures of Protected Health Information in accordance with 45 CFR 164.528.n. The Business Associate shall provide to the Government or an Individual, in time and manner reasonably designated by the Government, information collected in accordance with this Clause of the Contract, to permit the Government to respond to a request by an Individual for an accounting of disclosures of Protected Health Information in accordance with 45 CFR 164.528.2. General Use and Disclosure ProvisionsExcept as otherwise limited in this Clause, the Business Associate may use or disclose Protected Health Information on behalf of, or to provide services to, the Government for treatment, payment, or healthcare operations purposes, in accordance with the specific use and disclosure provisions below, if such use or disclosure of Protected Health Information would not violate the HIPAA Privacy Rule, the HIPAA Security Rule, DoD 6025.18-R or DoD 8580.02 if done by the Government. The additional requirements of Title XIII of the HITECH Act that relate to privacy and that are made applicable with respect to covered entities shall also be applicable to Business Associate.3. Specific Use and Disclosure Provisionsa. Except as otherwise limited in this Clause, the Business Associate may use Protected Health Information for the proper management and administration of the Business Associate or to carry out the legal responsibilities of the Business Associate.b. Except as otherwise limited in this Clause, the Business Associate may disclose Protected Health Information for the proper management and administration of the Business Associate, provided that disclosures are required by law, or the Business Associate obtains reasonable assurances from the person to whom the information is disclosed that it will remain confidential and used or further disclosed only as required by law or for the purpose for which it was disclosed to the person, and the person notifies the Business Associate of any instances of which it is aware in which the confidentiality of the information has been breached.c. Except as otherwise limited in this Clause, the Business Associate may use Protected Health Information to provide Data Aggregation services to the Government as permitted by 45 CFR 164.504(e)(2)(i)(B).d. Business Associate may use Protected Health Information to report violations of law to appropriate Federal and State authorities, consistent with 45 CFR 164.502(j)(1).4. Obligations of the GovernmentProvisions for the Government to Inform the Business Associate of Privacy Practices and Restrictionsa. The Government shall provide the Business Associate with the notice of privacy practices that the Government produces in accordance with 45 CFR 164.520.b. The Government shall provide the Business Associate with any changes in, or revocation of, permission by Individual to use or disclose Protected HealthInformation, if such changes affect the Business Associate's permitted or required uses and disclosures.c. The Government shall notify the Business Associate of any restriction to the use or disclosure of Protected Health Information that the Government has agreed to in accordance with 45 CFR 164.522.5. Permissible Requests by the GovernmentThe Government shall not request the Business Associate to use or discloseProtected Health Information in any manner that would not be permissible under the HIPAA Privacy Rule, the HIPAA Security Rule, or any applicable Government regulations (including without limitation, DoD 6025.18-R and DoD 8580.02) if done by the Government, except for providing Data Aggregation services to the Government and for management and administrative activities of the Business Associate as otherwise permitted by this clause.6. Terminationa. Termination. A breach by the Business Associate of this clause, may subject the Business Associate to termination under any applicable default or termination provision of this Contract.b. Effect of Termination.(1) If this contract has records management requirements, the records subject to the Clause should be handled in accordance with the records management requirements. If this contract does not have records management requirements, the records should be handled in accordance with paragraphs (2) and (3) below(2) If this contract does not have records management requirements, except as provided in paragraph (3) of this section, upon termination of this Contract, for any reason, the Business Associate shall return or destroy all Protected Health Information received from the Government, or created or received by the Business Associate on behalf of the Government. This provision shall apply to Protected Health Information that agents of the Business Associate may come in contact. The Business Associate shall retain no copies of the Protected Health Information.(3) If this contract does not have records management provisions and the Business Associate determines that returning or destroying the Protected Health Information is infeasible, the Business Associate shall provide to the Government notification of the conditions that make return or destruction infeasible. Upon mutual agreement of the Government and the Business Associate that return or destruction of Protected Health Information is infeasible, the Business Associate shall extend the protections of this Contract to such Protected Health Information and limit further uses and disclosures of such Protected Health Information to those purposes that make the return or destruction infeasible, for so long as the Business Associate maintains such Protected Health Information.7. Miscellaneousa. Regulatory References. A reference in this Clause to a section in DoD 6025.18-R, DoD 8580.02, Privacy Rule or Security Rule means the section currently in effect or as amended, and for which compliance is required. b. Survival. The respective rights and obligations of Business Associate under the "Effect of Termination" provision of this Clause shall survive the termination of this Contract.c. Interpretation. Any ambiguity in this Clause shall be resolved in favor of a meaning that permits the Government to comply with DoD 6025.18-R, DoD 8580.02, the HIPAA Privacy Rule or the HIPAA Security Rule.Section I - Contract ClausesCLAUSES INCORPORATED BY REFERENCE52.203-3 Gratuities APR 1984 52.204-7 System for Award Management JUL 2013 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards OCT 2015 52.204-13 System for Award Management Maintenance JUL 2013 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items JUN 2016 52.222-50 Combating Trafficking in Persons MAR 2015 52.223-16 Alt I Acquisition of EPEAT - Registered Personal Computer Products - Alternate I JUN 2014 52.223-18 Encouraging Contractor Policies To Ban Text Messaging While Driving AUG 2011 52.232-1 Payments APR 1984 52.232-8 Discounts For Prompt Payment FEB 2002 52.232-23 Alt I Assignment of Claims (May 2014) - Alternate I APR 1984 52.233-3 Protest After Award AUG 1996 52.237-2 Protection Of Government Buildings, Equipment, And Vegetation APR 1984 52.237-3 Continuity Of Services JAN 1991 52.243-1 Changes--Fixed Price AUG 1987 52.249-1 Termination For Convenience Of The Government (Fixed Price) (Short Form) APR 1984 52.249-8 Default (Fixed-Price Supply & Service) APR 1984 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. DEC 2015 252.211-7003 Item Unique Identification and Valuation MAR 2016 252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010 252.225-7000 Buy American--Balance Of Payments Program Certificate--Basic (Nov 2014) NOV 2014 252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports JUN 2012 252.239-7001 Information Assurance Contractor Training and Certification JAN 2008 252.243-7001 Pricing Of Contract Modifications DEC 1991CLAUSES INCORPORATED BY FULL TEXT52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014)The Contractor's representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.(End of clause) 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 7 days of contract expiration date.(End of clause) 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000)(a) The Government may extend the term of this contract by written notice to the Contractor within 7 days of contract expiration date (insert the period of time within which the Contracting Officer may exercise the option); provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 7 days before the contract expires. The preliminary notice does not commit the Government to an extension.(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 3 years.(End of clause) 52.219-4 NOTICE OF PRICE EVALUATION PREFERENCE FOR HUBZONE SMALL BUSINESS CONCERNS (OCT 2014)(a) Definitions. See 13 CFR 125.6(e) for definitions of terms used in paragraph (d).(b) Evaluation preference. (1) Offers will be evaluated by adding a factor of 10 percent to the price of all offers, except--(i) Offers from HUBZone small business concerns that have not waived the evaluation preference; and(ii) Otherwise successful offers from small business concerns.(2) The factor of 10 percent shall be applied on a line item basis or to any group of items on which award may be made. Other evaluation factors described in the solicitation shall be applied before application of the factor.(3) When the two highest rated offerors are a HUBZone small business concern and a large business, and the evaluated offer of the HUBZone small business concern is equal to the evaluated offer of the large business after considering the price evaluation preference, award will be made to the HUBZone small business concern.(c) Waiver of evaluation preference. A HUBZone small business concern may elect to waive the evaluation preference, in which case the factor will be added to its offer for evaluation purposes. The agreements in paragraphs (d) and (e) of this clause do not apply if the offeror has waived the evaluation preference.___ Offeror elects to waive the evaluation preference.(d) Agreement. A HUBZone small business concern agrees that in the performance of the contract, in the case of a contract for(1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other HUBZone small business concerns;(2) Supplies (other than procurement from a nonmanufacturer of such supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other HUBZone small business concerns;(3) General construction. (i) At least 15 percent of the cost of contract performance to be incurred for personnel will be spent on the prime contractor's employees;(ii) At least 50 percent of the cost of the contract performance to be incurred for personnel will be spent on the prime contractor's employees or on a combination of the prime contractor's employees and employees of HUBZone small business concern subcontractors;(iii) No more than 50 percent of the cost of contract performance to be incurred for personnel will be subcontracted to concerns that are not HUBZone small business concerns; or(4) Construction by special trade contractors. (i) At least 25 percent of the cost of contract performance to be incurred for personnel will be spent on the prime contractor's employees;(ii) At least 50 percent of the cost of the contract performance to be incurred for personnel will be spent on the prime contractor's employees or on a combination of the prime contractor's employees and employees of HUBZone small business concern subcontractors;(iii) No more than 50 percent of the cost of contract performance to be incurred for personnel will be subcontracted to concerns that are not HUBZone small business concerns.(e) A HUBZone joint venture agrees that the aggregate of the HUBZone small business concerns to the joint venture, not each concern separately, will perform the applicable percentage of work requirements.(f)(1) When the total value of the contract exceeds $25,000, a HUBZone small business concern nonmanufacturer agrees to furnish in performing this contract only end items manufactured or produced by HUBZone small business concern manufacturers.(2) When the total value of the contract is equal to or less than $25,000, a HUBZone small business concern nonmanufacturer may provide end items manufactured by other than a HUBZone small business concern manufacturer provided the end items are produced or manufactured in the United States.(3) Paragraphs (f)(1) and (f)(2) of this section do not apply in connection with construction or service contracts.(g) Notice. The HUBZone small business offeror acknowledges that a prospective HUBZone awardee must be a HUBZone small business concern at the time of award of this contract. The HUBZone offeror shall provide the Contracting Officer a copy of the notice required by 13 CFR 126.501 if material changes occur before contract award that could affect its HUBZone eligibility. If the apparently successful HUBZone offeror is not a HUBZone small business concern at the time of award of this contract, the Contracting Officer will proceed to award to the next otherwise successful HUBZone small business concern or other offeror.(End of clause) 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (NOV 2011)(a) Definition."Small business concern," as used in this clause, means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the size standards in this solicitation.(b) Applicability. This clause applies only to--(1) Contracts that have been totally set aside or reserved for small business concerns; and(2) Orders set aside for small business concerns under multiple-award contracts as described in 8.405-5 and 16.505(b)(2)(i)(F).(c) General. (1) Offers are solicited only from small business concerns. Offers received from concerns that are not small business concerns shall be considered nonresponsive and will be rejected.(2) Any award resulting from this solicitation will be made to a small business concern.(d) Agreement. A small business concern submitting an offer in its own name shall furnish, in performing the contract, only end items manufactured or produced by small business concerns in the United States or its outlying areas. If this procurement is processed under simplified acquisition procedures and the total amount of this contract does not exceed $25,000, a small business concern may furnish the product of any domestic firm. This paragraph does not apply to construction or service contracts.(End of clause) 52.219-28 POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JULY 2013)(a) Definitions. As used in this clause--Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ``not dominant in its field of operation'' when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.(3) For long-term contracts--(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards.(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update.(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:The Contractor represents that it ( ) is, ( ) is not a small business concern under NAICS Code - assigned to contract number .(Contractor to sign and date and insert authorized signer's name and title).(End of clause) 52.232-18 AVAILABILITY OF FUNDS (APR 1984)Funds are not presently available for this contract. The Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer.(End of clause) 52.232-19 AVAILABILITY OF FUNDS FOR THE NEXT FISCAL YEAR (APR 1984)Funds are not presently available for performance under this contract beyond September 30, 2017 . The Government's obligation for performance of this contract beyond that date is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise for performance under this contract beyond September 30, 2017, until funds are made available to the Contracting Officer for performance and until the Contractor receives notice of availability, to be confirmed in writing by the Contracting Officer.(End of clause) 52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013)(a) Except as stated in paragraph (b) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern:(1) Any such clause is unenforceable against the Government.(2) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked tough an ``I agree'' click box or other comparable mechanism (e.g., ``click-wrap'' or ``browse-wrap'' agreements), execution does not bind the Government or any Government authorized end user to such clause.(3) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement.(b) Paragraph (a) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures.(End of clause) 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):FAR Clauses http://acquisition.gov/comp/far/index.htmDFAR Clauses http://www.acq.osd.mil/dpap/dars/dfars/index.htm(End of clause) 252.203-7999 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIATION 2015-O0010)(FEB 2015) (a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information.(b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect. (c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d)(1) In accordance with section 743 of Division E, Title VIII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015, (Pub. L. 113-235), use of funds appropriated (or otherwise made available) under that or any other Act may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause. (2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause. (End of clause) 252.204-7006 BILLING INSTRUCTIONS (OCT 2005)When submitting a request for payment, the Contractor shall--(a) Identify the contract line item(s) on the payment request that reasonably reflect contract work performance; and(b) Separately identify a payment amount for each contract line item included in the payment request.(End of clause) 252.232-7001 DISPOSITION OF PAYMENTS (DEC 1991)Payment will be by a dual payee Treasury check made payable to the contractor or the and will be forwarded to that disbursing office for appropriate disposition.(End of clause)Section K - Representations, Certifications and Other Statements of OfferorsCLAUSES INCORPORATED BY REFERENCE52.225-18 Place of Manufacture MAR 2015CLAUSES INCORPORATED BY FULL TEXT52.204-3 TAXPAYER IDENTIFICATION (OCT 1998)(a) Definitions.Common parent, as used in this provision, means that corporate entity that owns or controls an affiliated group of corporations that files its Federal income tax returns on a consolidated basis, and of which the offeror is a member.Taxpayer Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service (IRS) to be used by the offeror in reporting income tax and other returns. The TIN may be either a Social Security Number or an Employer Identification Number.(b) All offerors must submit the information required in paragraphs (d) tough (f) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the IRS. If the resulting contract is subject to the payment reporting requirements described in Federal Acquisition Regulation (FAR) 4.904, the failure or refusal by the offeror to furnish the information may result in a 31 percent reduction of payments otherwise due under the contract.(c) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN.(d) Taxpayer Identification Number (TIN).___ TIN:.--------------------------------------------------------___ TIN has been applied for.___ TIN is not required because:___ Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States;___ Offeror is an agency or instrumentality of a foreign government;___ Offeror is an agency or instrumentality of the Federal Government.(e) Type of organization.___ Sole proprietorship;___ Partnership;___ Corporate entity (not tax-exempt);___ Corporate entity (tax-exempt);___ Government entity (Federal, State, or local);___ Foreign government;___ International organization per 26 CFR 1.6049-4;___ Other--------------------------------------------------------(f) Common parent.___ Offeror is not owned or controlled by a common parent as defined in paragraph (a) of this provision.___ Name and TIN of common parent:Name-------------------------------------------------------------------TIN--------------------------------------------------------------------(End of provision) 52.204-20 Predecessor of Offeror (JUL 2016)(a) Definitions. As used in this provision--Commercial and Government Entity (CAGE) code means--(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often tough acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.(b) The Offeror represents that it [____] is or [____] is not a successor to a predecessor that held a Federal contract or grant within the last tee years.(c) If the Offeror has indicated "is" in paragraph (b) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last tee years (if more than one predecessor, list in reverse conological order):Predecessor CAGE code: ____ (or mark "Unknown").Predecessor legal name: ____.(Do not use a "doing business as" name).(End of provision) 52.222-22 PREVIOUS CONTRACTS AND COMPLIANCE REPORTS (FEB 1999)The offeror represents that --(a) ( ) It has, ( ) has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation;(b) ( ) It has, ( ) has not, filed all required compliance reports; and(c) Representations indicating submission of required compliance reports, signed by proposed subcontractors, will be obtained before subcontract awards.(End of provision) 52.222-25 AFFIRMATIVE ACTION COMPLIANCE (APR 1984)The offeror represents that(a) [ ] it has developed and has on file, [ ] has not developed and does not have on file, at each establishment, affirmative action programs required by the rules and regulations of the Secretary of Labor (41 CFR 60-1 and 60-2), or(b) [ ] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.(End of provision)252.204-7007 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2015)Substitute the following paragraphs (d) and (e) for paragraph (d) of the provision at FAR 52.204-8:(d)(1) The following representations or certifications in the System for Award Management (SAM) database are applicable to this solicitation as indicated:(i) 252.209-7003, Reserve Officer Training Corps and Military Recruiting on Campus--Representation. Applies to all solicitations with institutions of higher education.(ii) 252.216-7008, Economic Price Adjustment--Wage Rates or Material Prices Controlled by a Foreign Government. Applies to solicitations for fixed-price supply and service contracts when the contract is to be performed wholly or in part in a foreign country, and a foreign government controls wage rates or material prices and may during contract performance impose a mandatory change in wages or prices of materials.(iii) 252.222-7007, Representation Regarding Combating Trafficking in Persons, as prescribed in 222.1771. Applies to solicitations with a value expected to exceed the simplified acquisition teshold.(iv) 252.225-7042, Authorization to Perform. Applies to all solicitations when performance will be wholly or in part in a foreign country.(v) 252.225-7049, Prohibition on Acquisition of Commercial Satellite Services from Certain Foreign Entities--Representations. Applies to solicitations for the acquisition of commercial satellite services.(vi) 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism. Applies to all solicitations expected to result in contracts of $150,000 or more.(vii) 252.229-7012, Tax Exemptions (Italy)--Representation. Applies to solicitations when contract performance will be in Italy.(viii) 252.229-7013, Tax Exemptions (Spain)--Representation. Applies to solicitations when contract performance will be in Spain.(ix) 252.247-7022, Representation of Extent of Transportation by Sea. Applies to all solicitations except those for direct purchase of ocean transportation services or those with an anticipated value at or below the simplified acquisition teshold.(2) The following representations or certifications in SAM are applicable to this solicitation as indicated by the Contracting Officer: [Contracting Officer check as appropriate.]____ (i) 252.209-7002, Disclosure of Ownership or Control by a Foreign Government.____ (ii) 252.225-7000, Buy American--Balance of Payments Program Certificate.____ (iii) 252.225-7020, Trade Agreements Certificate.____ Use with Alternate I.____ (iv) 252.225-7031, Secondary Arab Boycott of Israel.____ (v) 252.225-7035, Buy American--Free Trade Agreements--Balance of Payments Program Certificate.____ Use with Alternate I.____ Use with Alternate II.____ Use with Alternate III.____ Use with Alternate IV.____ Use with Alternate V.(e) The offeror has completed the annual representations and certifications electronically via the SAM Web site at https://www.acquisition.gov/. After reviewing the SAM database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in FAR 52.204-8(c) and paragraph (d) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer, and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below ____ [offeror to insert changes, identifying change by provision number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.FAR/DFARS Clause # Title Date Change Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications located in the SAM database.(End of provision)Section L - Instructions, Conditions and Notices to BiddersCLAUSES INCORPORATED BY REFERENCE52.204-16 Commercial and Government Entity Code Reporting JUL 2016 52.204-17 Ownership or Control of Offeror JUL 2016 52.214-34 Submission Of Offers In The English Language APR 1991 52.214-35 Submission Of Offers In U.S. Currency APR 1991CLAUSES INCORPORATED BY FULL TEXT52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):http://www.arnet.gov/far(End of provision)Section M - Evaluation Factors for AwardCLAUSES INCORPORATED BY REFERENCE52.217-5 Evaluation Of Options JUL 1990 N00183-16-T-0208 Department of the Navy Bureau of Medicine and Surgery
8/26/16, 11:17 AM