1. Interior paint at 995 alameda, GOV't owned housing 2. 2 bedroom turn-around 3.1 coast guard to provide paint. 3.2 interferences 3.2.1 contractor shall either remove, cover or protect all…

The U.S. Coast Guard awarded a $1,350 purchase order contract to Columbia Contracting (UEI: NUTDWXT8K8D7) for interior painting services at a government-owned housing unit located at 995 Alameda in Astoria, Oregon. The contract, awarded on July 31, 2008, with completion required by August 30, 2008, covers a two-bedroom unit renovation. The Coast Guard will supply the paint materials, while the contractor is responsible for all surface preparation, application, and finishing work in accordance with manufacturer specifications and quality standards.

The scope of work includes comprehensive surface preparation involving washing all interior walls, windowsills, moldings, and doors to remove contaminants; removing loose or blistered paint and sanding to create smooth surfaces; filling and concealing all nail holes, screw holes, and surface imperfections; protecting fixtures and surfaces not being painted; and applying paint to achieve a finished product free of sags, runs, ridges, brush marks, or color variations. Upon completion, the contractor must restore all protected fixtures to their proper locations and remove all waste and debris from the site. This contract was not designated as a set-aside award.

1. Interior paint at 995 alameda, GOV't owned housing 2. 2 bedroom turn-around 3.1 coast guard to provide paint. 3.2 interferences 3.2.1 contractor shall either remove, cover or protect all interferences (hardware, light fixtures, flooring, carpeting, screen doors, windows, window sashes, glazing or any other surface not to be painted) so surfaces on interferences are not contaminated. 3.3 project 3.3.1 contractor shall wash all interior walls, windowsills, moldings, and doors to remove all dirt, grease, or other contaminates that could be visible through new coat of paint or may cause the surface to new coat to become contaminated. 3.3.2 contractor shall allow sufficient time for all surfaced being washed to dry thoroughly prior to actual application of any paint. 3.3.3 contractor shall fill, cover, or otherwise conceal all nail holes, screw holes, or any other flaws or imperfections to any surface to be pained. 3.3.3.1 this should render any flaws or imperfections to be not visible to the coast guard inspector after paint has been applied. 3.3.4 contractor shall remove any loose or blistered paint, fill and sand, to provide a smooth even painted surface. 3.3.5 contractor shall apply all paints in accordance with manufacture's instructions and recommendations. 3.3.5.1 the finished surfaces shall not show sags, runs, ridges, drops, brush marks, missed areas or variation in the surface color. 3.4 restoration 3.4.1 contractor shall return all interferences to proper location. 3.4.2 contractor to insure all waste, garbage, debris, has been removed and disposed of in a proper manor. 3.4.3 contractor is not permitted to perform on-site clean-up of equipment.