1. Interior paint at 75 white bush, GOV't owned housing 2. 2 bedroom turn-around 3.1 coast guard to provide paint. 3.2 interferences 3.2.1 contractor shall either remove, cover or protect all…

The U.S. Coast Guard awarded a $1,400 purchase order to Parker Services for interior painting services at a government-owned housing unit located in Warrenton, Oregon. The project involves painting the interior of a two-bedroom residence at 75 White Bush. The contract was awarded on July 28, 2008, with an ultimate completion date of August 27, 2008. This contract was not designated as a set-aside contract.

The scope of work requires Parker Services to perform comprehensive surface preparation including washing all interior walls, windowsills, moldings, and doors to remove dirt and contaminants; filling and concealing all nail holes, screw holes, and surface imperfections; removing loose or blistered paint and sanding surfaces; and applying paint in accordance with manufacturer specifications. The contractor is responsible for protecting all non-painted surfaces such as hardware, light fixtures, flooring, and windows from contamination, and must restore all protective coverings upon completion. All work must meet Coast Guard inspection standards with no visible surface defects, and the contractor is required to remove and properly dispose of all waste and debris upon project completion.

1. Interior paint at 75 white bush, GOV't owned housing 2. 2 bedroom turn-around 3.1 coast guard to provide paint. 3.2 interferences 3.2.1 contractor shall either remove, cover or protect all interferences (hardware, light fixtures, flooring, carpeting, screen doors, windows, window sashes, glazing or any other surface not to be painted) so surfaces on interferences are not contaminated. 3.3 project 3.3.1 contractor shall wash all interior walls, windowsills, moldings, and doors to remove all dirt, grease, or other contaminates that could be visible through new coat of paint or may cause the surface to new coat to become contaminated. 3.3.2 contractor shall allow sufficient time for all surfaced being washed to dry thoroughly prior to actual application of any paint. 3.3.3 contractor shall fill, cover, or otherwise conceal all nail holes, screw holes, or any other flaws or imperfections to any surface to be pained. 3.3.3.1 this should render any flaws or imperfections to be not visible to the coast guard inspector after paint has been applied. 3.3.4 contractor shall remove any loose or blistered paint, fill and sand, to provide a smooth even painted surface. 3.3.5 contractor shall apply all paints in accordance with manufacture's instructions and recommendations. 3.3.5.1 the finished surfaces shall not show sags, runs, ridges, drops, brush marks, missed areas or variation in the surface color. 3.4 restoration 3.4.1 contractor shall return all interferences to proper location. 3.4.2 contractor to insure all waste, garbage, debris, has been removed and disposed of in a proper manor. 3.4.3 contractor is not permitted to perform on-site clean-up of equipment.