Purchase Order 80NSSC25PA456
Award Date
1/29/25
Potential Completion Date
4/23/25
Potential Value
$115K
Federal Agency
Shared Services Center
Awardee
Elementum 3D, Inc.
Ultimate Awardee
Not listed
PSC Category
9680 - Nonferrous Scrap
Federal Contract Vehicle
Set-Aside Type
Total Small Business
Extent Competed
Competed under SAP
Major Defense Program
Not listed
Pricing Type
Firm Fixed Price
Place of Performance
Erie, CO 80516, USA
Solicitation Procedures
Simplified Acquisition
Number Of Offers Received
6
Legislative Mandate
Not listed
National Interest Action
Not listed
Research Type
Not listed
Primary Consortia Member
Not listed
Similar Awards
This is a $82,100.00 firm-fixed-price purchase order awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to Elementum 3D, Inc. for the delivery of approximately 500 pounds of NASA Alloy GRX-810 Powder. The powder must meet precise chemical composition requirements and be pre-approved on NASA's IP list. This is a sole source procurement, as Elementum 3D is the only commercially available source with the required material used in an ongoing NASA/Air Force...
This is a firm fixed-price contract awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to Elementum 3D, Inc. for the additive manufacturing of advanced GRCOP42 material. The contract is designated as a Total Small Business set-aside, with a potential value of $753,752.00. Elementum 3D, Inc. is a manufacturer of goods specializing in advanced manufacturing powders and materials for 3D printing, and has received several other federal contract awards to...
This firm-fixed-price purchase order, awarded to MRL Materials Resources LLC (MRL), a small business, requires the additively manufacture of test specimens from a specialized superalloy powder provided by the National Aeronautics and Space Administration (NASA). The contract, valued at $26,000.00, has a period of performance ending on September 29, 2025. The original solicitation was a special notice published by NASA, seeking a vendor to develop suitable process conditions and print various...
This federal contract award is for the procurement of approximately 1,000 lbs of GRX-810 base alloy, -45/+10um powder by the National Aeronautics and Space Administration (NASA) from Linde Advanced Material Technologies Inc. (doing business as Praxair). The contract, valued at $77,600.00, is a firm-fixed-price purchase order without any set-aside designation. The powder is required for Laser Powder Bed Fusion (L-PBF) Additive Manufacturing at the NASA Glenn Research Center in Cleveland, Ohio....
This is a $94,000.00 firm-fixed-price purchase order contract awarded by NASA's Shared Services Center to Linde Advanced Material Technologies Inc., doing business as Praxair, a foreign-owned, for-profit manufacturer of materials and coatings. The contract is for the delivery of 1,000 pounds of NASA Alloy GRX-810 L-PBF cut powder, which is used in additive manufacturing research and applications. This sole-source award was made under the authority of FAR 13.106-1(b)(1)(i) based on Praxair's...
This is a $74,994 firm-fixed-price purchase order awarded by the Air Force Research Laboratory (AFRL) to Elementum 3D, Inc., a small business manufacturer of advanced 3D printing materials and additive manufacturing technologies. The contract is for the PERMEATE (Permeability Enabled by Rapid Manufacturing for Enhanced Aerospace Technology Effectiveness) project, which is a Small Business Innovation Research (SBIR) Phase I action. The contract has a total small business set-aside designation and...
This is a firm fixed-price purchase order awarded by the Shared Services Center, a civilian federal agency, to Elementum 3D, Inc., a small business manufacturer located in Erie, Colorado. The contract is valued at $25,150.90 and requires Elementum 3D to provide 1,000 lbs. of coated metal powder. The contract does not have a set-aside designation. Elementum 3D is a for-profit small business that specializes in advanced 3D printing materials and additive manufacturing technologies, with a focus on...
This is a firm-fixed price purchase order awarded by the National Aeronautics and Space Administration (NASA) Shared Services Center to Powder Alloy Corporation, a small business manufacturer, for the delivery of 900 kilograms of GRCop42 additive manufacturing powder material. The contract has a potential value of $207,860.06 and was awarded on September 17, 2021, with a completion date of December 10, 2021. Powder Alloy Corporation provides specialty metal powders to various federal agencies,...
This is a firm fixed-price purchase order contract awarded by NASA's Shared Services Center to North American Manufacturing Pros LLC, a self-certified small disadvantaged business located in Ardmore, Alabama. The $248,560.00 contract is for the development of laser powder bed fusion (L-PBF) parameters and the production of components using NASA's proprietary GRX-810 and ORCAlloy alloys. The contract work includes renting an EOS M280 L-PBF machine, optimizing additive manufacturing parameters for...
This is a $96,922.60 firm fixed-price purchase order awarded by the National Aeronautics and Space Administration (NASA) to A3Dm Technologies LLC, a small business specializing in advanced materials processing technologies. The contract is for the delivery of an Amazemet rePowder Ultrasonic Powder Atomizer system, which can produce high-quality spherical metal powders in precise size ranges (40-150 microns) for additive manufacturing applications. This contract, which has a completion date of...